Who is this buying guide for?

Loft viewer with weak Wi-Fi

Your film keeps buffering, especially in your converted loft. You want to know where best to place an extra access point and whether the floor is blocking the wireless signal. The Consumers’ Association highlights obstacles and access point placement as factors to consider.

Viewer with a cable to the loft

You can connect to the loft with a cable and want to use it for an access point or a wired television. TP-Link and ASUS explain that Ethernet backhaul is an option when the connections are suitable.

Viewer who wants to check 4K first

You want to know whether your internet speed is sufficient where you watch before buying new equipment. Netflix recommends a stable connection of 15 Mbps or higher for its own 4K UHD service.

Which buying concerns matter?

Start by finding out what’s causing interruptions where you watch. This will help you decide whether you mainly need better placement, extra access points or a wired connection.

What to consider What to look for when buying Who is this most important for?
Coverage in the loft Check the connection by the television and in potential spots for an extra access point. Bear floors and walls in mind. If my stream keeps buffering in the loft, I want to know whether coverage is the problem before replacing equipment. Around 36% of consumers are most concerned about coverage and stability.
Connection between nodes Check whether you have or can run a network cable, and whether the system supports Ethernet backhaul. If there’s a cable to the loft, I want to use it to connect an access point reliably. Around 29% of consumers give a wired connection top priority.
Speed for films Check the connection at the playback device and compare the result with your streaming service’s requirements. Netflix recommends a stable connection of 15 Mbps or higher for its 4K UHD service. If I mainly want to know whether 4K is possible in the loft, I’ll check the speed where I watch first. Around 21% of consumers give film-streaming speed top priority.
Purchase and ongoing management Choose the number of nodes to suit your home, and check the ports, power consumption and any paid add-on services. If I don’t want more equipment or management than necessary, I’ll compare the number of nodes and any services that become chargeable after an included period. Around 14% of consumers give costs and management top priority.

Common buying mistakes

  • Assuming a high Wi-Fi speed on the box guarantees 4K in the loft

    The Wi-Fi version alone doesn’t tell you how well a device will perform in your home. Your internet connection and obstacles such as walls and ceilings also play a part.

    Check the connection at the playback device and compare it with a check nearer the router. Also check the router’s position and the connection between floors.

  • Placing a wireless mesh node where the signal is already weak

    An additional node needs a usable connection to the first node itself. The Consumers’ Association recommends keeping obstacles between nodes to a minimum, ideally with no more than two rooms between them.

    First, try an intermediate spot with fewer obstacles. If the wireless connection between floors remains weak, see whether you can run a cable to the loft.

    You may need to change the placement, add another node or run a cable after all if the chosen spot can’t get a usable connection.

  • Assuming versions with the same model name are identical

    Hardware versions of the TP-Link Deco X50-PoE can differ. The Dutch manufacturer’s page lists V2, while the Consumers’ Association tested a unit marked EU Ver 1.0.

    Check the full model and hardware version, the connections, the power supply required and the CE marking on the version you’re considering. The Dutch Authority for Digital Infrastructure states that equipment placed on the market in the Netherlands must meet the applicable European requirements and carry a CE marking.

Brands to consider

TP-Link

The Deco X50 range includes Wi-Fi 6 mesh products; the X50-PoE is a separate version designed for PoE installation.

  • TP-Link says the Deco X50 supports optional Ethernet backhaul.
  • Check the hardware version of the X50-PoE before comparing port specifications. TP-Link lists two 2.5Gbps ports for V2; the Consumers’ Association tested a unit marked EU Ver 1.0.

ASUS

ZenWiFi XD5 is a range of Wi-Fi 6 mesh products for use across multiple rooms.

  • ASUS explains that Ethernet backhaul is available when Ethernet ports are present.
  • For a wired connection between nodes, you’ll need suitable Ethernet ports and a compatible cable.

NETGEAR

NETGEAR describes the Orbi RBK763S as a tri-band Wi-Fi 6 set with a router and two satellites.

  • According to NETGEAR, this set has seven Gigabit ports and includes one year of Armor.
  • These model specifications don’t prove how the set will perform in a particular loft. The extra capacity or included service may not be necessary for streaming a single film.

Joybuy products for streaming in the loft

The products below include a single router, wireless mesh systems and wired access points. Choose the right option based on checks where you watch and whether you can use a cable to the loft.

TP-Link Deco M4 mesh set with three units

TP-Link Deco M4 (3-pack), Wi-Fi 5

Suitable if you need several access points and want to check whether you can connect the television by cable.

Mesh set with three units, dual-band (2.4 GHz and 5 GHz), Wi-Fi 5 (802.11ac) and two Ethernet ports per unit.

View at Joybuy
ASUS RT-AX52 AX1800 wireless router

ASUS RT-AX52 AX1800

Suitable if your checks show that one router is enough, with the option to add AiMesh-compatible routers later.

Dual-band Wi-Fi 6 (2.4 GHz and 5 GHz), AiMesh compatibility and three Gigabit Ethernet ports.

View at Joybuy
TP-Link Deco X50 mesh set with three units

TP-Link Deco X50 (3-pack), Wi-Fi 6

Suitable if you want to use several access points and have a cable available between nodes or to a device.

Dual-band Wi-Fi 6 (802.11ax), three Gigabit Ethernet ports per unit and optional Ethernet backhaul.

View at Joybuy
TP-Link Deco X50-PoE mesh set with three units

TP-Link Deco X50-PoE (3-pack), Wi-Fi 6

Suitable for a multi-node setup when you have cabling and a compatible PoE power supply.

Mesh set with three units, Wi-Fi 6, PoE support and two Ethernet ports per unit. Check the hardware version; PoE requires a suitable power supply and compatible equipment.

View at Joybuy
TP-Link Omada EAP613 access point

TP-Link Omada EAP613 access point

Suitable if you have a wired connection to the loft and want to install a separate access point there.

Wi-Fi 6, one Ethernet port and mesh support. The product information lists wall and ceiling mounting, with power supplied via 802.3at-PoE, passive PoE or DC. Installation requires an Ethernet connection and a suitable power option.

View at Joybuy

Frequently asked questions

How do you decide whether you need a router or an extra access point?

Check the connection at the playback device in the loft and compare it with a check nearer the router. Also check where the router is placed, bearing walls and ceilings in mind. If the connection is weak mainly in the loft, look into adding an access point and how it will connect.

Where should you place a wireless mesh node?

Choose a spot where the node still has a usable connection to the first node, rather than simply putting it where coverage is worst. The Consumers’ Association recommends keeping obstacles to a minimum, ideally with no more than two rooms between nodes; then check the connection in the loft.

Can you use your own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you’re free to choose your router. The relevant requirements and settings still apply when connecting directly to your provider’s network, and a provider may refuse an insecure device. Ask your provider for the connection details if you want to replace the equipment they supplied.

Do you need a permit or registration for ordinary home Wi-Fi?

According to the Dutch Authority for Digital Infrastructure, home Wi-Fi is exempt from licensing if you use the designated frequencies and follow the conditions of use. The authority says there is no notification or registration requirement for using licence-exempt frequencies.

What recurring costs or services should you check?

Check power consumption and whether add-on services become chargeable after an included period. NETGEAR lists one year of Armor for the Orbi RBK763S; check the terms if you want to keep using the service afterwards.