Who is this guide for?

Watching beyond the hallway

You watch in a room that’s difficult to reach from your current Wi-Fi point. The location and connection to any additional point you add will determine which set-up is right for you. Consumentenbond and Tweakers both highlight placement and the connection between mesh points as important considerations.

Watching with a stuttering picture

Before buying equipment, you want to check whether interruptions are caused by Wi-Fi, your internet connection or several devices using the internet at once. Netflix notes that your home connection and use by other devices can affect picture quality.

Keeping your existing connection

You want to improve coverage without replacing your provider’s modem unnecessarily. ACM ConsuWijzer confirms that you can choose your own router, but check which connections and settings your set-up requires.

What should you consider when choosing?

Move your existing router

Choose this if: moving it to another location gives you a strong enough signal in the room where you watch.

Bear in mind: moving it may require a longer cable. Check what’s possible with your provider’s modem.

A standalone router

Choose this if: your current device isn’t up to the job and one well-placed Wi-Fi point can reach the room where you watch.

Bear in mind: a higher stated Wi-Fi speed doesn’t guarantee a better signal through a hallway or walls.

Wired access point or mesh

Choose this if: you can run a network cable to or near the room where you watch, and your existing Wi-Fi point can’t provide adequate coverage there.

Bear in mind: running a cable takes effort. Tweakers says a wired connection between mesh points is the most stable way to link them.

Wireless mesh system

Choose this if: you need Wi-Fi in several places, running cables isn’t practical and an intermediate point can still get a usable connection to the main point.

Bear in mind: adding a point where the signal is already weak doesn’t guarantee an improvement.

What to consider What should you look for? Which consumers is this for?
Coverage beyond the hallway Test the signal where you watch and at possible intermediate locations; check whether you can run a cable between points. I want a strong enough signal in the room beyond the hallway and need to know where an extra point will still stay connected; around 36% of consumers are most concerned about coverage.
Video without interruptions Measure the connection on the device you use for playback and compare it with the requirements of your video service and chosen picture quality. If the picture stutters, I want to distinguish Wi-Fi problems from a slow internet connection or simultaneous use first; around 29% of consumers prioritise uninterrupted playback.
Keeping your existing equipment First check the placement and settings, then see whether the new device can work as an access point behind your existing modem. I’d rather make a targeted change than replace my provider’s modem without good reason; around 21% of consumers focus on keeping their equipment and managing costs.
Installation and security Check the installation instructions, update support, appropriate security settings and the correct CE marking. I want a solution I can set up and manage with my existing connection; around 14% of consumers are most concerned about installation and network security.

Common buying mistakes

  • Assuming a higher maximum Wi-Fi speed guarantees smooth video

    A device’s speed alone doesn’t tell you how strong the connection will be in the room beyond the hallway. Your internet connection and simultaneous use by other devices can also play a part.

    Measure the connection where you watch and check the requirements of your video service before choosing a router.

  • Putting a wireless mesh point where the signal is weakest

    A wirelessly connected point needs a usable connection to the other point itself. Its location therefore affects whether the set-up will work.

    Test an intermediate location or find out whether you can run a network cable.

  • Treating two- and three-point packs as the same product

    The number of points included determines which set-up you can create and may affect which pack you need.

    Check the exact pack, its ports and placement options rather than looking only at the product range name.

Brands to compare

TP-Link

The Deco X50 is available in packs with one, two or three points, and may suit you if you want to spread the connection across several locations.

  • TP-Link Netherlands lists Wi-Fi 6 and three gigabit ports per point for the Deco X50.
  • The stated coverage doesn’t predict how the system will perform in your home. Check the pack contents and whether you can connect the points by cable.

ASUS

According to the Dutch specifications, the ZenWiFi BD4 is available in versions with one, two or three points.

  • ASUS Netherlands lists Wi-Fi 7, access point mode and two 2.5G ports per point.
  • These specifications don’t prove you’ll get better coverage in your hallway; pack contents may vary by region.

FRITZ!

According to the manufacturer, the FRITZ!Mesh Set 1700 can be connected to a FRITZ!Box or another router.

  • FRITZ! lists automatic updates and a set with three points.
  • You won’t necessarily need three points for a hallway and one viewing spot. First work out how many points and connections your set-up needs.

NETGEAR

Orbi is NETGEAR’s mesh product range for set-ups with several Wi-Fi points.

  • The range gives you the option to compare several mesh set-ups.
  • For each set you’re considering, check the number of points, how they connect and any additional costs. The range name alone doesn’t tell you what coverage you’ll get where you watch.

Joybuy products for Wi-Fi coverage

These mesh products are for anyone who wants to extend Wi-Fi towards the viewing area using several points. First, test the signal at possible locations for the points and check whether a wired connection is practical.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68, 2-pack

An option if you want to spread Wi-Fi across two mesh points and are considering a wired or wireless connection between them.

Pack: 2-pack. Check that the specific unit has the correct CE marking.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

Suitable for a set-up with Wi-Fi in more than one location; check that your planned placement will reach the room where you watch.

The product name lists Wi-Fi 6 and a pack containing two units. Check that the specific unit has the correct CE marking.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

An option if you need several placement points; first decide whether three points are right for the rooms you want to reach.

The product name lists 2.4 GHz and 5 GHz, Wi-Fi 6 and a pack containing three units. Check that the specific unit has the correct CE marking.

View at Joybuy
TP-Link Deco XE75, tri-band Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

Worth considering for Wi-Fi in several locations; check how many points are included in the pack you choose and whether the planned locations can connect to each other.

The product name lists tri-band and Wi-Fi 6E. Check that the specific unit has the correct CE marking.

View at Joybuy
TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

An option if you want to spread Wi-Fi across two points and can run a cable between them.

The product name lists 2.4 GHz and 5 GHz, Wi-Fi 6 and a pack containing two units. Check that the specific unit has the correct CE marking.

View at Joybuy

Frequently asked questions

Do I need a Wi-Fi 7 router to record a theatre performance?

Not just for video. First, measure the connection where you watch and check the requirements of your video service and chosen picture quality. A newer Wi-Fi standard won’t fix a slow internet connection.

Where should I put an extra Wi-Fi point near a narrow hallway?

Don’t simply put a wirelessly connected point where the signal is weakest: the point needs a usable connection of its own. Test possible intermediate locations. If you can run a cable, Tweakers says a wired connection between mesh points is the most stable way to link them.

Can I use my own router instead of my internet provider’s?

Yes. ACM ConsuWijzer confirms that you can choose your own router. Before replacing your existing one, check which connections and settings your provider and planned set-up require.

Which marking should I check on a router in the Netherlands?

Check that the specific device has the correct CE marking. The Dutch Authority for Digital Infrastructure says that equipment must carry this marking; the product name alone doesn’t confirm what’s on the unit itself.

What should I look for with updates and extra equipment?

Check how many Wi-Fi points you need, whether you want to use a cable between them and how updates are provided. FRITZ! lists automatic updates for the FRITZ!Mesh Set 1700. For other devices, check the information for the model you’ve chosen.