Who should consider this choice?

A studio with workstations in several rooms

You want to know whether every workstation will get a good enough connection. Compare a single router with a setup using multiple Wi-Fi points, and check whether you can connect those points with a cable.

A studio with lots of devices online at once

Work devices and household devices share the network. Check which devices can connect by cable and which Wi-Fi bands they support.

A studio that wants to separate guest and work access

You want to decide which devices need access to the work network and which can use a guest network. Settings and requirements vary by model and operating mode.

What should you look for?

Start with the places where you need a connection. Then check how many devices will be online at once, which equipment needs a cable, and whether guests should have access to your internal network.

What to consider What to check Who is this important for?
Coverage at every workstation Identify where the connection is weak. With a mesh system, check how many units are included and whether Ethernet backhaul is supported. If every workstation needs a connection, I want to know whether one router will be enough or whether I’ll need extra Wi-Fi points. Around 33% of consumers put coverage at every workstation first.
Devices used at the same time Make a list of the devices that will be active at once. Check which Wi-Fi bands they support and which ones you can connect by cable. When work and household devices are online at the same time, I want to know whether the setup can handle that mix. Around 27% of consumers put simultaneous device use at the top of their list.
Separating guest and work access Check guest access, access to the internal network, operating mode and any firmware requirements. ASUS lists requirements for certain guest network and VLAN features. I want to give guests or household devices access without automatically letting them reach studio equipment. Network separation is the top priority for around 20% of consumers.
Wired workstations Count the LAN ports you need, and check the WAN port and connection to your existing modem or network. For desktop computers or printers, I want to know in advance how many network connections I’ll need. Around 20% of consumers put wired workstations first.

What to watch out for when buying

  • Assuming the maximum Wi-Fi speed is what you’ll get at every workstation

    An advertised radio speed doesn’t tell you what connection you’ll get at a particular workstation. Whether you need one router or multiple Wi-Fi points also depends on the rooms you want to cover.

    First, map out your workstations and where you plan to place the router or mesh units. Compare advertised speeds after that.

  • Assuming a guest network automatically keeps studio equipment separate

    Guest access and access to the internal network can depend on the operating mode and firmware. Some shared devices may also need to remain accessible.

    Check the settings for guests, work devices and devices that need to communicate with each other, then test them after installation.

  • Buying a router without checking your existing connection

    Connecting a router behind your provider’s modem is different from replacing that modem. You may need specific settings for the connection method you choose.

    Decide whether you’ll use the router behind your existing modem or replace your equipment. If needed, ask your provider about the connection settings.

Brands to consider

TP-Link

The Archer AX55 is an example of a single Wi-Fi 6 router, while the Deco X50 is an example of an expandable Wi-Fi 6 mesh system.

  • TP-Link lists OFDMA for the Archer AX55 and optional Ethernet backhaul for the Deco X50.
  • Advertised capacity and coverage are manufacturer claims, not measurements taken in your studio. Also check how many units are included in the set you choose.

ASUS

The RT-AX88U Pro is worth considering if you need the listed wired ports or more advanced network configuration.

  • For this model, ASUS lists one 2.5G WAN port, one 2.5G LAN port and four gigabit LAN ports, and includes it among models that support VLAN.
  • ASUS states that certain guest network features depend on the operating mode, and that VLAN settings may have firmware requirements. Check the details for the exact model and configuration you choose.

FRITZ!

The FRITZ!Box 4060 is an option for use behind an existing modem, particularly if you also need the telephony or DECT features highlighted by FRITZ!.

  • For this model, FRITZ! lists tri-band Wi-Fi 6, a 2.5G WAN port and three gigabit LAN ports.
  • The extra features are only useful if you plan to use them. The manufacturer’s advertised radio speed isn’t a measurement of the connection in your studio.

Mesh products for workstations in different rooms

These Joybuy product picks focus on mesh setups with multiple Wi-Fi points for workstations in different rooms.

ASUS ZenWiFi BD4 mesh Wi-Fi system

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

A mesh setup is a good fit for a studio with workstations in several rooms. The product title specifies dual-band Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco X50 mesh set with three units

TP-Link Deco X50 (3-pack)

This three-unit mesh set is designed for setups with Wi-Fi points in several rooms. The product title specifies dual-band Wi-Fi 6 (802.11ax), and the product information mentions optional Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro mesh set with three units

TP-Link Deco XE75 Pro (3-pack)

A three-unit mesh set may suit workstations spread across several rooms. The product title specifies tri-band Wi-Fi 6E (802.11ax) on 2.4, 5 and 6 GHz.

View at Joybuy
TP-Link Deco XE75 tri-band mesh Wi-Fi system

TP-Link Deco XE75 Tri-band Wi-Fi 6E

A mesh setup is worth considering when workstations in different rooms need Wi-Fi. The product title specifies tri-band Wi-Fi 6E (802.11ax) on 2.4, 5 and 6 GHz.

View at Joybuy
TP-Link Deco X50 mesh set with two units

TP-Link Deco X50 (2-pack)

This two-unit mesh set is designed for workstations in several rooms. The product title specifies dual-band Wi-Fi 6 (802.11ax) on 2.4 and 5 GHz; the product information lists gigabit ports on each unit.

View at Joybuy

Frequently asked questions

Can I use my own router in the Netherlands instead of my provider’s?

Yes. The Netherlands Authority for Consumers and Markets (ACM) confirms that consumers and businesses can connect their own modem or router. Check with your provider to find out which connection settings you need. Using a router behind your existing provider modem is different from replacing that modem.

Does a Wi-Fi router newly sold in the Netherlands need a CE mark?

Radio equipment placed on the EU market must meet the applicable requirements. According to the Dutch Authority for Digital Infrastructure, compliant equipment must carry a CE mark. The authority also lists additional cybersecurity requirements that apply from 1 August 2025. Check the documentation for the exact product version.

How do I connect multiple Deco X50 points to each other?

TP-Link describes both a wireless connection and optional Ethernet backhaul between Deco X50 units. Check in advance whether you can run a cable to the places you have in mind and whether the pack you choose includes enough units.

What should I keep up to date after installation?

Keep your router software and connected smart devices up to date, and use strong passwords. This is security advice from the Dutch Government, not a guarantee that it will make a particular network completely secure.