Who should consider this choice?

Participants online at the same time

You share a single local internet connection with others who are using video, audio or screen sharing at the same time. First, work out whether the bottleneck is the connection itself or the wireless network.

Participants in different rooms

You want to know whether there’s a strong enough Wi-Fi signal in the areas where your workshop will actually take place, such as behind walls or on another floor. This helps you decide whether one router is enough or you need additional Wi-Fi access points.

People managing a shared network

You set up and maintain the workshop network. Check the available connections, and confirm which guest access options and settings are offered by the exact model.

What should you look for when buying?

First, test the connection using a wired connection, then check the Wi-Fi in the workshop areas. This helps you choose the right set-up based on the bottleneck: your internet connection, Wi-Fi coverage, or the connections and features you need.

Improve your existing set-up

When: when you’re not yet sure where the problem is, or you can connect an important work area using a cable.

Consider: moving the router or using a wired connection may save you from buying new equipment, but running a cable isn’t always practical and won’t fix a slow wired internet connection.

One standalone Wi-Fi router

When: when a well-placed router can reach the workshop areas and you’re missing a specific router feature.

Consider: one device is easier to position than several Wi-Fi access points, but it won’t necessarily solve a weak signal behind walls or on another floor.

Additional access point or mesh

When: when tests show that the workshop areas are outside the good coverage of your existing router.

Consider: you’ll need suitable locations and power for multiple access points; a wired connection also requires a practical route for the cable.

Buying concern What to look for Relevant consumers
Connection when several people are online Compare a wired test with Wi-Fi under the expected load. The advertised Wi-Fi speed alone doesn’t tell you whether your internet connection is sufficient. When I’m using video and audio at the same time as others during a workshop, I want to know whether the connection can handle the load. Around 36% of consumers say simultaneous connections are their main buying concern.
Wi-Fi in all workshop areas Test the signal in every area you’ll use, and compare repositioning the router with adding an access point or mesh system. When participants are in different rooms, I want a usable Wi-Fi signal in every area. Around 29% of consumers prioritise coverage in more distant work areas.
Compatibility with existing equipment Check how the router connects to your provider’s equipment and how many wired ports you need. If I need to connect the router to my existing provider equipment, I want to know in advance which connections and settings are required. Around 21% of consumers give the right set-up and connections top priority.
Guest access and maintenance Check the guest network feature and update policy for the exact model and hardware version. If visitors use the network, I want to be able to check what access they have and how to maintain the device. Around 14% of consumers prioritise guest access and maintenance.

Common buying pitfalls

  • Buying a router before identifying the bottleneck

    A wired test helps you tell the difference between a problem with your internet connection and a problem with the Wi-Fi in your building.

    Test the connection using a cable first, then check the workshop areas. Only choose new equipment once you know which part of the connection is falling short.

    This helps you avoid replacing equipment when the problem is actually your provider’s connection.

  • Assuming advertised Wi-Fi speed or coverage is guaranteed

    Manufacturers’ specifications can’t predict how distance, walls and ceilings will affect the signal in your workshop areas.

    Choose between one router and multiple access points based on tests in the areas where participants will be sitting, not just the packaging.

  • Assuming similar model names mean the same version

    A product name alone doesn’t always tell you which hardware version or connections you’ll get. For example, ASUS has V1 and V2 versions of the RT-AX58U.

    Before buying, check the full model name, hardware version, connections and the exact version being offered.

Relevant brands to compare

TP-Link

Compare the standalone Archer AX55 with the Deco X50 range for multiple Wi-Fi access points. The number you need depends on the signal in your workshop areas.

  • TP-Link lists OFDMA for the Archer AX55 and optional wired backhaul for the Deco X50.
  • These model specifications don’t predict the coverage in your building or the quality of a workshop connection.

ASUS

The RT-AX58U is a standalone Wi-Fi 6 router to compare if traffic management, guest access or access point mode is important to you.

  • ASUS lists these features for the RT-AX58U.
  • ASUS lists different processors for V1 and V2, so check the hardware version being offered and don’t assume features are the same as on other models.

FRITZ!

The FRITZ!Box 4060 is a tri-band Wi-Fi 6 router that connects to existing internet equipment and can be extended with compatible FRITZ! mesh devices.

  • FRITZ! lists a 2.5-gigabit WAN port, guest access and mesh compatibility with FRITZ! devices.
  • These features don’t prove that you need tri-band for your workshop or that it will make your provider connection faster.

NETGEAR

The Nighthawk RAX30 is a standalone Wi-Fi 6 router to compare if management features and model support are important to you.

  • NETGEAR provides manuals, product information and firmware support for this model.
  • That support alone says nothing about performance on your workshop network.

Router and mesh options at Joybuy

These options include standalone routers and mesh systems for a workshop set-up. Choose based on measured coverage, the connections you need and how you want to organise your network.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 2-Pack

A mesh system to consider if you want to position multiple network access points. Where you place them depends on the signal in your workshop areas.

Model variant: 2-pack.

View at Joybuy
ASUS RT-AX52 AX1800 AiMesh router

ASUS RT-AX52 AX1800 AiMesh router

A standalone router to compare if one transmitter can reach your workshop areas. Check the coverage before choosing a single device.

Dual-band: 2,4 GHz and 5 GHz. The product name lists AiMesh and Gigabit Ethernet.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack, Wi-Fi 6

TP-Link Deco X50 (3-Pack) Wi-Fi 6

A mesh system to compare if tests show that you need multiple Wi-Fi access points. Check that the number of units and their placement are right for your building.

Dual-band: 2,4 GHz and 5 GHz. Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

TP-Link Deco XE75 Tri-band Mesh Wi-Fi 6E

A mesh option to compare if you want to use multiple network access points. Check where they’ll need to be placed to reach your workshop areas.

Tri-band: 2,4 GHz, 5 GHz and 6 GHz. Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco X50-PoE mesh system, 3-pack, Wi-Fi 6

TP-Link Deco X50-PoE (3-Pack) Wi-Fi 6

A mesh system to compare if you need multiple network access points. Check that the connections suit your planned set-up.

Dual-band: 2,4 GHz and 5 GHz. Wi-Fi 6 (802.11ax); the product name lists two Ethernet ports.

View at Joybuy

Frequently asked questions

How much bandwidth do multiple workshop participants need?

It depends on the meeting service you use, your video settings and the number of simultaneous connections at your location. For a group meeting with 720p video, Zoom recommends an upload speed of 2,6 Mbit/s and a download speed of 1,8 Mbit/s. These figures are Zoom’s example, not a general requirement for other services or a guarantee for several users together. Test your connection under the expected load.

Can I use my own router with my Dutch internet provider?

Yes. ACM ConsuWijzer confirms that you’re allowed to use your own router in the Netherlands. You may need specific settings to connect it, so ask your provider for these if necessary. Also check whether you’ll connect the router behind your existing provider equipment or directly to the internet connection.

Do I need a frequency licence for ordinary Wi-Fi?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used on the designated frequencies without a licence, notification or registration, subject to the applicable conditions of use. This does not remove the requirements that apply to the radio equipment itself.

What should I consider when installing and maintaining my network?

Compare a wired test with Wi-Fi tests in the workshop areas, and check that the connections are compatible with your existing set-up. Ask your provider for the necessary settings if needed, and keep your network equipment up to date. The Dutch Authority for Digital Infrastructure states that the correct CE marking is mandatory. Check this on the device you actually receive, and follow the installation manual.

Does a two-year manufacturer’s warranty cover the full warranty period in the Netherlands?

No. ACM ConsuWijzer distinguishes between a manufacturer’s or seller’s warranty and your statutory guarantee. The law does not set a fixed duration for the statutory guarantee; what matters is what you could reasonably expect from the product.