Student with a workspace in a distant room
You upload portfolio files from a room where distance, walls or floors can weaken the Wi-Fi. First, work out whether the internet connection or the link to the room is the bottleneck.
First, measure the upload speed using a wired connection at the connection point and compare it with your broadband package. A new router won’t fix a slow fixed-line connection, as ACM ConsuWijzer advises. If the connection is good there but the Wi-Fi is weak in your study, choose the right solution: run an Ethernet cable to the room or use a wired access point if cabling is possible, or opt for mesh if the units can maintain a reliable connection with each other. Distance and walls can weaken Wi-Fi, according to the Consumers’ Association; also check that the connections and mode are compatible with your provider’s modem.
You upload portfolio files from a room where distance, walls or floors can weaken the Wi-Fi. First, work out whether the internet connection or the link to the room is the bottleneck.
You want to get a wireless connection to your study and can try placing several mesh points. A quoted coverage area doesn’t guarantee that upload speeds will be fast enough in your room.
You want to extend your Wi-Fi without automatically replacing your modem. So check the connections and make sure you use the right router or access point mode.
Choose this when: the wired upload speed is good and a more central position also gives you sufficient coverage in your study.
Trade-off: distance and obstacles may still limit the signal; a router without a built-in modem needs a compatible modem.
Choose this when: you can run a cable to your study and want to connect your computer directly or add Wi-Fi there.
Trade-off: running a cable takes effort, but avoids a wireless connection between network points.
Choose this when: you need Wi-Fi in several rooms or an extra point closer to your study would help.
Trade-off: you’ll need to position several units; without a cable, the wireless connection between them must be good enough. TP-Link explains the different connection requirements for Deco in router and access point modes.
| Consideration | What should you check? | Who is this important to? |
|---|---|---|
| Wi-Fi in the study | Check where the units can go and whether Ethernet backhaul is possible; test the result in the room. | If I upload portfolio files from a distant room, I want a usable connection there. Around 36% of consumers prioritise coverage in the study. |
| Upload speed | Compare a wired test at the modem with tests in your study and with the speed included in your broadband package. | If my uploads are slow, I want to know whether the internet connection or Wi-Fi is the bottleneck. Around 29% of consumers prioritise resolving this upload limitation. |
| Connection and mode | Decide whether the device should work as a router or access point, then check how it connects and whether any provider settings are needed. | If I want to extend my existing home network, I want to know how new equipment will connect to it. Around 21% of consumers put connection and mode first. |
| Updates and running costs | Check how updates are installed and how many units you’ll need to cover the rooms you want to reach. | If I want to keep my setup manageable, I consider updates and what the complete installation involves. Around 14% of consumers give maintenance and running costs the most attention. |
Wi-Fi performance and the speed of your fixed-line internet connection are two different things. A faster Wi-Fi specification won’t increase the upload speed included in your broadband package.
First, test the connection using a cable at the connection point and compare the speed with your broadband package. Then test it at your workspace; ACM ConsuWijzer advises taking a wired measurement close to the connection point.
Distance and obstacles such as walls and floors can weaken the Wi-Fi signal, even if the router has a high quoted speed.
First, try moving the router. If the connection in your study is still weak, consider a cable or an additional Wi-Fi point.
The connection requirements for mesh in router mode may differ from those in access point mode. Connecting it incorrectly can mean extra setup work.
First, work out which device will handle the router function, then follow the connection instructions for the mode you’ve chosen.
Allow extra time to reset a network that has been connected incorrectly.
The Deco X50 range is worth considering if an extra mesh point could help bring Wi-Fi to a distant room.
The FRITZ!Box 4060 is a router without a built-in modem, designed to be used behind a compatible modem.
The RT-AX59U is a standalone Wi-Fi 6 router for anyone who wants to manage their own router and add compatible equipment later.
Orbi is a mesh option for homes where the router and satellites are positioned in different places.
This selection includes mesh sets for Wi-Fi across multiple points and an access point for a wired connection to its location.
Image unavailable
A mesh set with two units for anyone who wants to add an extra Wi-Fi point; the product description lists Ethernet backhaul as an option.
Wi-Fi 6; 2 units.
Image unavailable
A set of three units for anyone who wants to add several Wi-Fi points and test the connection in their study.
Dual-band: 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax).
TP-Link lists three gigabit ports per unit for the Deco X50.
Image unavailable
A dual-band mesh router for anyone considering a mesh setup; before buying, check that any additional units you need are compatible with your chosen setup.
Wi-Fi 7; dual-band.
Image unavailable
An access point for anyone who wants to bring Wi-Fi closer to their study over a wired connection; it needs an Ethernet connection at the installation location.
Wi-Fi 6; 2976 Mbit/s; PoE.
The product name lists one gigabit Ethernet port; wall or ceiling mounting is given as an installation option.
Image unavailable
A mesh set with two units for anyone who wants to extend Wi-Fi across multiple points and use PoE for installation.
Dual-band: 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax); PoE.
First, test the connection using a cable close to the connection point and compare the upload speed with your broadband package; then test it in your study. If the wired upload speed is also low, investigate the connection first or discuss your test results with your provider. If it’s only slow in the room, consider the router’s position, a cable or an extra Wi-Fi point.
You can, provided the set and setup are compatible with your modem. TP-Link describes an access point mode for Deco, as well as different cabling requirements for router and access point modes; follow the instructions for your chosen setup.
Not necessarily. Moving your existing equipment, using a cable or asking your provider for help may be a more targeted solution; first, find out where the speed drops.
Yes, ACM ConsuWijzer confirms that you’re free to choose your router. If you also want to replace your provider’s modem, check the connection requirements and settings you’ll need; a provider may refuse a device that’s unsafe or unsuitable for its network. This is different from adding an extra Wi-Fi point behind your existing modem.
Check for firmware updates and enable automatic updates if available. If you use your own router, you’re responsible for following the update instructions.