Who is this relevant to?

A group using lots of devices at once

You organise project weekends when several laptops and phones are online at the same time, and want to know whether Wi-Fi is the bottleneck. The Consumentenbond recommends testing with a wired connection to assess your fixed internet connection.

A renter with a less-than-ideal workspace

You live in a compact home, but your project workspace is in a poor position relative to the modem. In that case, placement or an access point may matter more than an extensive mesh system. The Consumentenbond also highlights the importance of where you use Wi-Fi.

An organiser with changing groups of guests

You want to get visitors online without automatically giving them access to your own network. Think ahead about shared equipment, such as a printer, and how you’ll manage guest access.

What should you look for when choosing?

First, compare a wired connection test with Wi-Fi where you work. This will help you decide whether to focus on your fixed connection, coverage, simultaneous use or network access.

What to consider What should you check? Who is this important for?
Simultaneous use Compare wired and wireless test results during typical use. If Wi-Fi 6 features are part of your decision, check whether your laptops and phones support Wi-Fi 6 too. If several people will be working online at the same time, you’ll want to know whether Wi-Fi is the limiting factor. Around 33% of consumers prioritise simultaneous use.
Coverage where you work Test the places where people will work. Check where you could place a router or extra access point, and whether you can run a cable. If the modem is poorly positioned, a reliable connection in your project workspace matters more than coverage in rooms you don’t use. Around 27% of consumers give coverage in the workspace top priority.
Guest access Check the guest network settings and test both internet access and the intended access to local devices. If participants only need internet access, you’ll want to keep them separate from your private network. Around 20% of consumers prioritise guest access.
Connection and maintenance Decide whether you’ll use the device behind your provider’s modem or replace the modem. If you’re replacing it, check the settings required by your provider and how updates are managed. If you want to minimise extra configuration or maintenance, deciding whether to keep your provider’s equipment is important. Around 20% of consumers give connection and management top priority.

Common buying mistakes

  • Assuming a higher Wi-Fi speed means faster internet

    Your fixed connection, Wi-Fi placement and the devices you use can all affect the experience. A router with a higher advertised Wi-Fi speed won’t automatically fix an internet connection problem.

    First, test with an Ethernet cable, then compare the result with Wi-Fi in your project workspace. The Consumentenbond recommends connecting your computer to your home network by cable when running a speed test.

  • Buying mesh just because you’ll have several people over

    Extra Wi-Fi points are designed to improve coverage; having several devices doesn’t, on its own, mean your coverage is inadequate. A mesh system also means extra equipment and installation.

    First, try a better position for your router and test again. Consider extra points if coverage is still weak in your workspace after you’ve made that change.

  • Turning on guest Wi-Fi without testing local collaboration

    A guest network can restrict access to your local network. This may prevent participants from using a shared printer or other local equipment.

    Before the project, test which devices participants need to access and check that your chosen network setup allows it. For example, ASUS notes this limitation for the guest network on the RT-AX58U.

  • Confusing your own router with a direct modem replacement

    Using a router behind your existing modem is different from replacing the modem supplied by your provider. Replacing it may involve provider settings and specific device requirements.

    First, decide which setup you want to use, then ask your provider which settings you’ll need. ACM ConsuWijzer explains the freedom to use your own router and separately outlines considerations when using your own modem.

Brands to consider

TP-Link

The Archer AX55 is worth considering if you’re looking for a single Wi-Fi 6 router. Deco is a separate product range for situations where you need extra Wi-Fi points.

  • TP-Link says the Archer AX55 has dual-band Wi-Fi 6 and OFDMA.
  • These are manufacturer specifications, not independent performance test results. Also check the exact version and whether your devices support the relevant Wi-Fi features. The Consumentenbond listing for the Deco X10 is for a 2-pack, so check how many points are included in the version you’re considering.

ASUS

The RT-AX58U is worth considering if you’re looking for access point mode and specific guest network features.

  • The Dutch ASUS specifications list four Gigabit LAN ports and a guest network that restricts access to the local network.
  • The specifications distinguish between V1 and V2 processor versions. Check which version you’re getting, especially if this specification matters to your decision.

FRITZ!

The FRITZ!Box 4050 is worth considering if you want to use a Wi-Fi 6 router behind an existing modem and need telephony features.

  • The manufacturer describes using it behind fibre, cable or DSL modems, and lists three Gigabit LAN ports and a DECT base station.
  • Before buying, check the version sold in the Netherlands and the settings required by your provider. Telephony features won’t add much to your decision if you don’t use them.

Router and mesh options at Joybuy

This selection includes standalone Wi-Fi routers and mesh systems. First, check whether you need extra coverage in your project workspace. Mesh systems require several points that you can position effectively.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

A mesh system to consider if tests show you need extra coverage in your workspace.

Version: 2-Pack.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

A mesh system for anyone who can position extra points where tests show coverage is inadequate.

Wi-Fi 6; version with two mesh units.

View at Joybuy
ASUS RT-AX52 AX1800 AiMesh wireless router

ASUS RT-AX52 AX1800 AiMesh

A standalone router to consider if you want to factor in Wi-Fi 6 and a wired connection for simultaneous use.

Gigabit Ethernet; dual-band (2.4 GHz / 5 GHz).

View at Joybuy
TP-Link Deco X50 3-Pack Dual-Band Wi-Fi 6

TP-Link Deco X50 3-Pack

A mesh system with three points to consider if tests show that you need extra coverage in several places.

Wi-Fi 6; dual-band (2.4 GHz / 5 GHz); version with three units.

View at Joybuy
ASUS RT-AX52 Pro AX3000 wireless router

ASUS RT-AX52 Pro AX3000

A standalone router to include in your comparison if you’re looking for a wired connection and dual-band Wi-Fi.

Gigabit Ethernet; dual-band (2.4 GHz / 5 GHz).

View at Joybuy

Frequently asked questions

Should you buy a faster router straight away for a group project?

No. First, test your connection using an Ethernet cable and compare it with Wi-Fi in your project workspace. If the wired connection repeatedly falls short, a different Wi-Fi router won’t automatically solve the problem. The Consumentenbond recommends connecting to your home network with a cable when running a speed test.

Where should you put the router in a compact home?

Try placing it higher up and closer to the centre of your home, outside the meter cupboard, then test again in your workspace. If you can’t move the equipment supplied by your provider, check whether a separate access point would work with your connection and available cabling.

Can visitors use our project printer over guest Wi-Fi?

Not always; it depends on the guest network settings. ASUS specifies that guests using the RT-AX58U can access the internet, but access to the local network is restricted. Test in advance whether your chosen setup allows the required access to the printer.

Can you use your own router in the Netherlands?

Yes. ACM ConsuWijzer explains your freedom to use your own router. Check which settings and requirements apply to your connection, though. Using a router behind a modem supplied by your provider is not the same as replacing that modem.

Who is responsible for updating your own router?

Check how your model receives security updates and install any available updates. VeiligInternetten points out that providers update their routers where possible. If you have your own device, don’t assume the same arrangements apply without checking.