Who is this choice relevant to?

Teacher filming an overhead view with a phone

You want your students to see the nib and the full movement of each letter. R2B describes a ring light set with a phone holder, while NEEWER also offers a separate overhead arm. Check that your chosen mount holds your phone securely above the entire writing area.

Creator who wants to show ink colour accurately

You switch between different paper, colours or daylight and want to adjust the brightness and colour temperature. NEEWER lists adjustment options for specific ring light models; make a test recording to see how your ink and paper look on camera.

Creator with a small work surface

You want to leave room for your paper and writing hand, so you’re comparing a set with floor stands against a clamp-on overhead arm. Measure the available floor and desk space, and check that the mount leaves the writing area clear.

What should you look for?

First decide where the camera needs to go. Then choose the lighting direction and setup that leave your writing area clear.

What to consider What to look for Who is this important for?
Stable overhead view Check the camera angle, phone width and mount, and whether the arm or stand leaves the paper clear. If I want to show the nib and every letter movement from above, my phone needs to stay securely positioned above the entire sheet of paper. Around 36% of consumers prioritise a stable overhead view.
Paper, ink and reflections Look for dimming and adjustable colour temperature; make a test recording with the paper and ink you plan to use. I want the lines and differences in colour to remain visible, without distracting glare on wet ink. Around 29% of consumers prioritise legibility, ink colour and reflections.
Clear writing area Measure the floor and desk space, and check the clamp fit, load capacity and cable routing. If my hand needs to move freely across the page, I don’t want a tripod leg or unstable arm getting in the way. Around 21% of consumers prioritise having clear workspace.
Power and components Compare the contents of the box, power connection and included holder with what you need for your setup. I want to know in advance whether the basic setup will work with my phone and power supply, or whether I’ll need to source extra components. Around 14% of consumers consider a simple setup and clear information about the components most important.

Common buying pitfalls

  • Confusing tripod height with reach over the desk

    A tripod may be tall enough without the phone reaching the centre of the paper. This could leave the nib out of shot or let your hand block the writing area.

    Mark out where you want the camera and pen to go, then check the overhang, holder and load capacity before choosing a set.

    You may need a separate overhead arm or another suitable mount.

  • Assuming a stated CRI or ‘flicker-free’ claim guarantees good results for teaching

    Manufacturer specifications don’t describe how your camera will record your ink or how it will mix with the room lighting. So they can’t guarantee that colours and movement will look good in your video.

    Compare the specifications for the exact model and test it with the paper, ink and video settings you intend to use.

  • Assuming all the components are included in the box

    According to R2B, the R2B Groningen set is supplied without a CR2032 battery for the remote control. An overhead arm is not listed among the contents of the Godox LR150 package.

    Compare the package contents, power requirements and camera angle you want before choosing a set.

    Depending on your chosen setup, you may need a suitable power supply, mounting arm or battery for the remote control.

Brands to consider

R2B

The Groningen ring light set is designed for anyone looking for a phone holder and tripod in one setup.

  • R2B lists a 26 cm ring and 30 lighting settings; the stated maximum tripod height is 186 cm.
  • Tripod height alone doesn’t tell you whether the phone can be positioned above the centre of your writing area. According to R2B, the CR2032 battery for the remote control is not included.

NEEWER

The RL-18 and SRP18-2.4G are larger ring light models; the DS009 is a separate overhead arm for mounting a camera.

  • NEEWER lists dimming, adjustable colour temperature and a CRI of 95 for the RL-18 and SRP18-2.4G. These are manufacturer specifications.
  • The DS009 is a separate mounting component, not a light. Check that the arm is compatible with your ring light or desk stand.

Godox

The LR150 is a ring light for video with a published model manual.

  • The manual lists an adaptor, smartphone holder, dimming range of 1%–100% and colour temperature of 3000–6000 K.
  • An overhead arm is not listed among the contents of the package. Godox states that the LR150 should be kept dry and not used in damp conditions.

Ulanzi

Ulanzi offers compact phone and ring light setups, including options for filming yourself or creating a portable phone setup.

  • Ulanzi recommends adjusting the light angle and distance, and checking your recording for unwanted reflections.
  • A compact magnetic phone set may not be suitable as a light source for an entire writing area or as a camera mount directly above the paper.

Elgato

The Ring Light is included only as a historical reference for a ring light with a desk clamp and camera mount.

  • Elgato describes the Ring Light as having a desk clamp and camera mount.
  • Elgato says the Ring Light has been discontinued and is considered legacy/EOL. This historical information says nothing about current availability or software support.

Joybuy products for smartphone video

These product picks focus on ring lights for smartphone video, with adjustable lighting and a home-friendly setup in mind.

Ring light with tripod, 10 inch, 63-inch tripod, remote control, 3 colours and 10 brightness settings

Ring light with tripod, 10 inch, 63-inch tripod, remote control, 3 colours and 10 brightness settings

An option for smartphone video if you want to adjust the lighting.

The product name lists a 10-inch ring, a 63-inch tripod, a remote control, 3 colours and 10 brightness settings.

View at Joybuy
ULANZI 4-inch ring light for phones, 3 colour temperatures from 3000K to 7000K and 5 brightness settings

ULANZI 4-inch ring light for phones, 3 colour temperatures and 5 brightness settings

A compact ring light for phones if you want to adjust the colour and brightness while filming smartphone video.

The product name lists 3 colour temperatures from 3000 K–7000 K and 5 brightness settings.

View at Joybuy

Frequently asked questions

Can you position the camera in the centre of the ring for a straight-down shot?

Not necessarily: a phone holder or camera mount only confirms that mounting is possible. Check that your phone can sit above the entire sheet of paper without getting in the way of your pen or hand.

What can you do if wet ink reflects the ring light?

Make a test recording and first try changing the angle or distance of the light. Dimming or diffusion may also help; Ulanzi recommends checking your recording for unwanted reflections.

Is a CE mark enough to judge whether a ring light meets the rules?

No. Where applicable EU rules require a CE mark, it is the manufacturer’s declaration and not an independent quality mark. The rules that apply also depend on the product’s configuration, such as its power supply and any wireless features; check the documentation for the exact model.

Who should you contact if a ring light doesn’t work properly during normal use?

For a consumer purchase in the Netherlands, contact the seller to resolve any issue with a faulty product. The Dutch government states that the Netherlands has no fixed statutory guarantee period; what you can reasonably expect from a product depends in part on the product itself and the sales information.

What should you check before setting up a ring light and phone holder?

Check that the mount is suitable for your phone and desk, set up the tripod securely according to the instructions, and keep an eye on the load capacity. Follow the power and safety instructions for the exact model too; for example, Godox says to keep the LR150 dry and not to dismantle it yourself.