Who is this set-up for?

Maker with limited table space

You want to film the book and both hands from above without a tripod base getting in the way of paper, glue and tools. Whether a desk clamp will fit depends on the edge of your table. Ulanzi advises matching the clamp to the edge’s thickness and shape.

Tutor demonstrating techniques

You need room to move your hands freely while folding, cutting and binding, as well as a camera angle you can reproduce. A suitable combination of light and mount makes it easier to adapt the set-up to your work surface.

Maker filming longer sessions

You want to keep the lighting consistent throughout a class, so check in advance whether mains power or a battery will suit the planned recording time. Also check which power supply and mounting options are included with the version you choose.

What should you look for when choosing?

Ring light with desk clamp or overhead arm

Suitable when: your table edge can support the clamp and you want to film the book from above without a tripod base on the work surface.

Keep in mind: measure the edge, arm reach and available space. A long arm also needs a suitable mount.

Ring light with freestanding tripod

Suitable when: there’s no suitable table edge, or you want to move the set-up and have room for the tripod legs.

Keep in mind: check where the legs will sit and whether the light and phone together can achieve the overhead angle you want.

Compact light with a separate camera mount

Suitable when: your camera is already securely positioned above the book and you mainly need additional adjustable lighting.

Keep in mind: a compact light won’t replace an overhead arm or camera mount.

First, map out the book, your hand movements and the camera’s centre line on the table. Then compare the mounting options and the space the complete set-up will take up.

What to consider What should you check? Who is this important for?
Mounting and free table space Measure the table edge and check the clamp range, arm reach and where the tripod legs will sit. If I need room for the book and tools, I want to know whether the mount will fit outside my work area. Around 36% of consumers say free table space is their top priority.
Clear view of your hands and the book Frame the largest book and check that the light and arm won’t block the view. If I want to demonstrate folding, cutting and binding, my camera needs to capture the process from above. Around 29% of consumers say a clear view of these techniques is their top priority.
Visible detail and adjustable lighting Check the dimming options and colour temperature of the exact model. If needed, make a test recording using your own materials. If I want to show fine details in paper and thread, I need to be able to adjust the light to suit my materials. Around 21% of consumers say visible detail and adjustable lighting are their top priority.
Power and recording time Check the power supply and contents of the chosen version, and compare any stated battery life with the length of your class. If I want to record a class without unnecessary interruptions, I need to know in advance what power supply and mounting options I’ll need. Around 14% of consumers say power, kit contents and recording time are their top priority.

Common buying mistakes

  • Assuming a ring light for filming faces is a complete overhead set-up

    A phone holder in the ring doesn’t guarantee that the camera can reach the centre of the book or leave enough room for both hands.

    Before buying, map out the largest book, your hand movements and the camera’s centre line. Then check that the complete mount can reach that position.

    Depending on the kit, you may also need a separate overhead arm or camera mount.

  • Assuming the power supply or kit contents from a similar product description

    The Godox LR150 manual specifies 24 V/2 A and an adapter, while product descriptions also mention USB power. A light stand isn’t necessarily included.

    Ask the seller to confirm the connection and contents of the exact version. Don’t rely only on a description of a similar kit.

    Depending on the kit you choose, you may need a separate stand or a suitable power supply.

  • Applying a declaration for a different model to the light you’re buying

    The Godox declaration refers to the LR15Bi and LR Kit; these are not the same model names as the LR150.

    Before buying, compare the full model number with the product information and documentation for the version on offer.

Brands and product ranges to consider

These product ranges offer examples of different mounting options and uses. The features listed apply to the versions mentioned and don’t mean that every model from the brand is the same.

NEEWER

According to NEEWER, the RH10B kit combines a ring light with a tripod, phone holder and tilting mount. This could be useful if you have space to set it up next to your bookbinding work.

  • NEEWER lists adjustable brightness, 2900–7000 K and an adjustable tripod measuring 54–180 cm.
  • The product page gives two different diameters: 10 and 12 inches. Check the specification for the version on offer. The stated settings don’t prove that the tripod will be stable on your table.

Godox

The LR150 is a larger, adjustable ring light with a phone holder. The compact LR15Bi is a different version and isn’t interchangeable with the LR150.

  • The Godox LR150 manual specifies stepless brightness adjustment and a colour temperature of 3000–6000 K.
  • The manual doesn’t list a desk or floor stand as included. The power supply and dimming range mentioned in retailers’ descriptions may differ from the manual, so check the exact version.

Ulanzi

According to Ulanzi, the U200 combines ring-shaped video lighting with a camera body. It could be suitable if you already have a compatible camera mount.

  • Ulanzi lists a 1/4-inch mount, adjustable colour temperature and a built-in battery for the U200.
  • Whether a phone holder or tripod is included depends on the kit you choose. The stated battery life is the manufacturer’s estimate, not a measurement taken during a bookbinding class.

Elgato

According to Elgato, the Elgato Ring Light has a desk clamp and camera mount. This version could be useful if your table has a suitable edge.

  • Elgato lists a clamp opening of up to 6 cm and adjustable lighting.
  • Elgato marks this version as legacy/EOL and warns that its specifications may not match current hardware or software. Also check the height adjustment on the version being offered.

Ring lights at Joybuy

These Joybuy options are aimed at smartphone recording: a ring light with a tripod and a compact light that attaches to a phone. Neither product title makes it clear whether the camera can be positioned above the book, so check the complete set-up.

Ring Light with Tripod, 10 inch, with phone holder

Ring Light with Tripod, 10 inch

This kit could work if you have room for a tripod and are filming with a phone. Check that the holder can achieve the camera angle you want above the book.

The product name lists a phone holder, remote control, three light colours and ten brightness levels.

Before buying, check the product information for the exact version, including the required product documentation and CE marking.

Joybuy
ULANZI 4-inch Phone Ring Light for phone

ULANZI 4" Phone Ring Light

This compact light is designed for recording with a phone. Check whether the phone itself can be positioned where you want it above the book using a separate mount.

The product name lists three colour temperatures from 3000K–7000K and five brightness levels.

Before buying, check the product information for the exact version, including the required product documentation and CE marking.

Joybuy

Frequently asked questions

Does the phone need to sit in the middle of the ring to film a bookbinding class?

No. First decide where the camera needs to go to give you a clear overhead view. A separate camera mount can give you more freedom over positioning. Then check that the light illuminates the book without getting in the way of your hands or the frame.

Can I use a table-edge clamp on any small table?

No. The shape and thickness of the edge, and the arm’s reach, need to suit the table and the recording position. Elgato lists a clamp opening of up to 6 cm for its Ring Light; that measurement won’t automatically apply to other ring lights.

What should I look out for when setting it up and after use?

Leave room for the book and both hands, keep cables away from the work surface and follow the manual for your chosen model. For the LR150, Godox says to keep the light dry and not to dismantle it yourself; these instructions apply to that model.

What are my rights if a ring light bought online breaks too soon?

In the Netherlands, you can expect a product to last for a reasonable time under normal use; statutory guarantees don’t have a fixed two-year term, according to ACM ConsuWijzer. Online purchases also generally come with a 14-day cooling-off period from delivery, subject to legal exceptions. The seller must provide a remedy for a faulty product in line with the applicable terms.

Does a CE logo prove that every ring light on offer complies with the rules?

No. A CE marking is the manufacturer’s declaration that the product complies with the relevant EU rules. Check the information for the exact model and version on offer. The Godox declaration mentioned here applies to the LR15Bi and LR Kit, not the LR150.