Who is each solution for?

Student with a single remote study

You mainly want to improve Wi-Fi in one spot and can place a repeater between the router and the study. The Consumers’ Association and TP-Link highlight placement and coverage as important considerations.

Presenter with an Ethernet cable

You have a cable running to the study, or can install one, and want a wired connection between the router and the Wi-Fi access point. NETGEAR describes Ethernet as the backhaul for an access point.

Resident with several rooms with weak signals

You want coverage in more than one place and need to check that your router works with the mesh system you choose. The Consumers’ Association and ASUS emphasise the importance of compatibility.

What should you look for when choosing?

For a single remote room, your choice starts with the connection between the router and the Wi-Fi access point: it can be wireless via a repeater or wired via an access point.

Wireless Wi-Fi repeater

Choose this when: you mainly want to reach one remote room and there’s an intermediate spot that still gets a usable signal from the router.

Trade-off: you don’t need an Ethernet cable to the Wi-Fi access point, but the backhaul remains wireless and positioning matters.

Wired access point

Choose this when: there’s an Ethernet cable running from the router to the study, or you can install one.

Trade-off: the backhaul runs over the cable, but installing the cable and selecting the right operating mode need some thought.

Mesh extension

Choose this when: you want to cover several rooms and your existing router can work with the mesh system you choose.

Trade-off: features such as OneMesh and AiMesh depend on compatible routers, so check that they work together before choosing.

What to consider What should you check? Who will find this important?
Coverage in the study Find a usable power socket between the router and the room, then test the signal there. If you mainly need a usable connection in that one remote room, coverage comes first; around 36% of consumers have the same priority.
Connection route Check whether it’s possible to run an Ethernet cable to the room and whether the device supports access point mode. If you’d prefer a wired connection between the router and the Wi-Fi access point while presenting, look for this option; around 29% of consumers pay most attention to the connection route.
Router compatibility Note the router’s full model name and check which mesh combinations and operating modes it supports. If you want to use mesh features with your current router, first check that the devices work together; around 21% of consumers prioritise compatibility.
Total costs Compare the number of Wi-Fi access points you need, the stated energy consumption and any cabling costs. If you want to avoid unnecessary Wi-Fi access points, installation or electricity costs, consider the whole setup; around 14% of consumers see total costs as their main consideration.

Common purchasing mistakes

  • Placing the repeater where the signal is weakest

    A wireless repeater still needs to receive a usable connection from the router. So a spot next to the furthest wall isn’t necessarily suitable.

    Find an intermediate spot with a usable router signal, then test the connection in the study.

  • Assuming every mesh system works with every router

    Brand-specific features such as OneMesh and AiMesh require compatible routers.

    Check the router model, supported mesh feature and operating mode. You may need different equipment for the mesh feature you want to use.

  • Confusing a mobile signal repeater with a Wi-Fi repeater

    A Wi-Fi repeater extends an existing Wi-Fi network; repeaters for GSM or UMTS signals are a different type of product. The Dutch Authority for Digital Infrastructure treats these mobile repeaters separately.

    Check that the device is designed to extend Wi-Fi, not a mobile network.

Brands to compare

TP-Link

The RE605X is a Wi-Fi 6 repeater worth comparing if you have a coverage issue in one room. Its Ethernet port and access point mode may be useful if you have a cable available.

  • According to TP-Link, the RE605X has a Gigabit port and a signal indicator.
  • OneMesh requires a OneMesh router. The product specifications can’t predict the coverage you’ll get in your study.

FRITZ!

The FRITZ!Repeater 1200 AX is worth comparing if you’re extending a FRITZ! network or using a wired connection.

  • FRITZ! lists Wi-Fi 6 and one Gigabit LAN connection.
  • If you’re using it with a different router, check which features are available. The stated specifications don’t indicate the coverage you’ll get in a particular home.

ASUS

The RP-AX58 is worth comparing if you need access point mode or want to extend an existing AiMesh network.

  • ASUS describes a wired backhaul in access point or AiMesh mode.
  • AiMesh requires a compatible router. ASUS also notes that 160 MHz on 5 GHz may be restricted in some regions.

NETGEAR

The EX6120 is a useful example to compare Wi-Fi 5 and how a repeater connects.

  • NETGEAR lists a separate access point mode.
  • The stated Ethernet port is 10/100 Mbit/s. The AC1200 class isn’t a measured speed for a presentation.

Joybuy products for extending your Wi-Fi

Below you’ll find mesh systems, an access point and an AiMesh router for situations where you want to cover several rooms or connect a Wi-Fi access point by cable. Before buying, check compatibility and the CE marking on the specific model that will be delivered.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A mesh system with two units, for extending coverage across several rooms.

The product description lists tri-band Wi-Fi and both wired and wireless backhaul.

Joybuy
TP-Link Deco E4 (3-pack)

TP-Link Deco E4 (3-pack)

A mesh system with three units for extending Wi-Fi across several rooms.

The product description lists Wi-Fi 5 on 2,4 and 5 GHz, and Ethernet ports of up to 100 Mbps per unit.

Joybuy
Ubiquiti UniFi AP U7 Long-Range

Ubiquiti UniFi AP U7 Long-Range

An access point worth comparing if you want to provide Wi-Fi over a wired connection and can use a suitable PoE+ power supply.

The product description lists PoE+ (802.3at), a 2,5-Gigabit Ethernet port and wall or ceiling mounting. It’s described for indoor use unless installed in a suitably protected environment.

Joybuy
ASUS RT-AX52 AX1800 AiMesh router

ASUS RT-AX52 AX1800 AiMesh router

A router worth comparing if you want to extend an existing AiMesh network with compatible equipment.

The product description lists Wi-Fi 6 and dual-band on 2,4 and 5 GHz. The AiMesh extension described requires an AiMesh-compatible router.

Joybuy
TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

A mesh system with three units for covering several rooms and providing wired connections to a unit.

The product description lists Wi-Fi 6, dual-band on 2,4 and 5 GHz, and three Gigabit Ethernet ports per unit.

Joybuy

Frequently asked questions

Does the repeater have to be in the study?

Not necessarily. A wireless repeater also needs to receive the router’s signal, so try a suitable power socket between the router and the study, then check the connection where you’ll be presenting.

When do I use an Ethernet port as an input rather than for a device?

It depends on the mode you’ve set. TP-Link describes the RE605X connecting to the router by cable in access point mode, and connecting to a wired device in repeater mode. Check the manual for the model you choose.

Will a higher Wi-Fi class automatically fix a stuttering presentation?

No. The Consumers’ Association points out that the Wi-Fi version alone doesn’t determine performance. Check the positioning too, and test the connection where you’ll be presenting.

What legal requirement should you check when buying a Wi-Fi repeater in the Netherlands?

Radio equipment sold in the EU must meet the applicable European requirements; when it conforms, the manufacturer applies the CE marking. Check that the model actually delivered carries this marking, as advised by the Dutch Authority for Digital Infrastructure.

Do you need permission from a mobile provider for an ordinary Wi-Fi repeater?

The separate repeater rules described by the Dutch Authority for Digital Infrastructure apply to mobile signals such as GSM or UMTS, not to a device that extends an existing Wi-Fi network. So make sure you choose a Wi-Fi repeater, not a mobile signal repeater.