Who can benefit from a camera remote shutter release?

Photographer with a fixed camera set-up

You position a compatible camera by the cards and want to release the shutter without touching the camera body. The right connection or Bluetooth support determines which remote release will work; Canon and Nikon each describe options for specific models.

Card maker with limited table space

You swap cards and backgrounds on a small table and need to decide whether a cable will get in the way or wireless control would better suit your set-up. Canon and Nikon describe both wired and wireless options for specific cameras.

Camera app user

You want to check whether your existing camera and phone already support remote shooting before buying an accessory. Canon Camera Connect and Nikon SnapBridge offer this feature with supported combinations.

What should you look for when choosing?

What to consider What should you check? What matters to consumers?
Compatibility Check the exact camera model and the required connection or Bluetooth support. Also check whether you need an adapter. When I buy a remote release, I want to be sure it works with my camera first; around 33% of consumers say compatibility is their main concern.
Space on the table Consider the cable route and compare the stated cable length with a compatible wireless option. When swapping cards, I want to keep the work surface clear; around 27% of consumers prioritise having clear workspace.
Control for repeated shots Decide whether you only want to release the shutter or also need a separate focus function. Buttons vary by model. When I photograph several cards from the same position, I don’t want to keep touching the camera; around 20% of consumers prioritise this kind of control.
Existing app control Before buying an accessory, test whether the manufacturer’s app can release the shutter remotely with your own camera and phone. If my camera app already releases the shutter remotely, I don’t want to buy a separate release I don’t need; around 20% of consumers make avoiding an unnecessary purchase their top priority.

Pitfalls to avoid when buying

  • Assuming the same camera brand is enough

    Connections and wireless support vary by camera model. Some combinations also require an adapter.

    Compare the full camera model with the manufacturer’s compatibility information and check which connection and components you need.

  • Not checking the cable route across a small table

    A wired remote release needs to reach the camera without getting in the way of your cards or workspace. Canon gives a stated reach of 80 cm for the RS-80E3.

    Plan the route in advance and compare it with your set-up. If a cable won’t work in that space, consider only a wireless option that’s compatible with your camera.

  • Assuming every wireless set has just one component

    Wireless systems can differ in the components they require. Sony describes the RMT-P1BT as working with supported cameras without an additional receiver; JJC lists a transmitter, receiver, connection cable and batteries for the ES-628F3.

    Check everything included in the set and which camera cable you need, rather than relying on the word ‘wireless’ alone.

Brands and models to consider

Canon

Canon describes wired and Bluetooth remote releases for compatible cameras. Check which option is supported for each model.

  • Canon lists an E3 connection and a stated reach of 80 cm for the RS-80E3. The BR-E1 uses Bluetooth and has an AF-start button.
  • The wired and Bluetooth models are different options for specific camera models; check your camera’s connection and compatibility.

Nikon

Nikon describes wired and Bluetooth remote releases for certain cameras. SnapBridge is a possible app-based option for supported combinations.

  • The MC-DC2 is a wired option; the ML-L7 has separate buttons for the shutter and video recording.
  • The ML-L7 doesn’t work with every Nikon camera. Check compatibility with your exact model and the control options available.

Fujifilm

The wired RR-100 is an option for the X and GFX cameras listed by Fujifilm.

  • Fujifilm specifies a 2.5 mm connection and half-press and full-press operation. A right-angle plug extension cable is also included.
  • Some of the listed cameras need a separate 2.5 mm to 3.5 mm adapter. Check the information for your exact model.

Sony

The RMT-P1BT is a wireless option for supported Sony cameras with the required Bluetooth support.

  • Sony describes operation without a cable or additional receiver and lists a status LED.
  • Check your camera model’s compatibility. Don’t assume it is fully dust- or moisture-resistant.

JJC

JJC offers models with different connections and control options; whether a particular version is suitable depends on its connection and your camera.

  • For its wired MA-R, JJC describes a two-stage button and power supplied by the camera.
  • According to JJC, the wireless ES-628F3 consists of a transmitter, receiver and connection cable, and uses batteries. Compatibility varies by cable version.

Joybuy product selection

The product featured below is a Bluetooth remote control for the listed Osmo models. Before considering it for photographing cards, check whether your camera is one of those models.

Osmo Action GPS Bluetooth Remote Control

Osmo Action GPS Bluetooth Remote Control

A Bluetooth option for remote control with the listed Osmo models. Check model compatibility before choosing it for your set-up.

Compatibility according to the product name: Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6.

Joybuy

Frequently asked questions

Does a remote shutter release need to match the camera brand?

The key things to check are your exact camera model and the connection or wireless support it requires. For example, Fujifilm lists cameras that need an extra adapter for the RR-100; Nikon describes the ML-L7 as compatible with specific cameras.

How can I take photos without touching the camera?

First, position the camera securely and check which control options your model supports. Then use a suitable cable, pair a compatible Bluetooth remote release according to the camera instructions, or try a supported camera app. Releasing the shutter remotely won’t stop an unstable set-up from moving.

Can I try using my phone as a remote control first?

Yes, if your camera and phone support the manufacturer’s app and remote control. Canon describes releasing the shutter through Camera Connect, while Nikon offers camera control through SnapBridge. Check that the combination works with your devices.

What should I check about adapters, batteries and returns?

Check whether your chosen version needs a model-specific adapter or batteries. The Dutch government states that consumers generally have 14 days to change their mind when buying remotely; check the terms and exceptions that apply to your purchase.