When photographing an etching on a small table, first try your camera’s self-timer; the Nikon COOLPIX P1100 manual describes a delay to prevent camera shake caused by pressing the shutter button. If you want to take repeated shots without a countdown, choose a remote shutter release only if it is confirmed as compatible with your camera model. A cable needs a matching socket and space on the table, while wireless control works only if your camera supports it.
Who is this guide for?
Photographers unsure which socket their camera has
You want to check first whether a cable plug or wireless remote release is compatible with your camera body. Canon, Fujifilm, Nikon and Sony list compatibility by model, so don’t assume that an accessory from the same brand will automatically work.
Etching photographers with a fixed set-up
You want to operate the shutter without touching your camera between shots. A remote shutter release or suitable self-timer can help; Nikon describes this approach for the COOLPIX P1100.
Photographers working at a crowded table
You want to work out whether a cable can run neatly around your work area or whether wireless control would suit the space better. Your choice also depends on what your camera supports.
What should you consider when choosing?
Built-in self-timer
Choose this if: your camera has a suitable setting and you’re taking a few shots from a fixed set-up.
The trade-off: you won’t need a separate remote release, but the shot is taken only after the set delay; settings vary by camera model.
Wired remote shutter release
Choose this if: you want to take a shot remotely straight away and your camera’s socket matches the remote release.
The trade-off: Canon lists the RS-80E3 as compatible with an E3 socket; Fujifilm specifies a 2.5mm socket for the RR-100 and says an adapter is required for some camera models.
Wireless remote control
Choose this if: a cable would be awkward and your camera supports the wireless remote release in question.
The trade-off: check model-specific support and pairing requirements; Sony says the communication range of the RMT-P1BT depends on the conditions.
| What to consider |
What should you look for? |
Who should consider this? |
| Compatibility |
Check the full camera model, socket and any adapter requirements in the model-specific documentation. |
If I want to be sure the remote release will work with my camera, I’ll check the model and socket before choosing. Around 36% of consumers put compatibility first. |
| Taking shots without touching the camera |
Try your camera’s self-timer or check whether the remote control triggers the shutter. |
With a fixed set-up, I don’t want to touch the camera to operate the shutter. Around 29% of consumers prioritise taking repeated shots without moving the camera. |
| Space on the table |
Plan the cable route or check whether your camera supports a wireless remote control. |
If there’s little space around the etching, I want to know whether a cable will get in the way. Around 21% of consumers focus mainly on workspace and cable routing. |
| Extra accessory |
Try the built-in self-timer first, if your camera model has one and it suits the type of shot you’re taking. |
For a few shots, I want to check whether a camera feature will do the job first. Around 14% of consumers mainly want to avoid buying an unnecessary accessory. |
What to watch out for when choosing
-
Assuming Bluetooth or a plug type means universal compatibility
A wireless feature or matching plug size alone doesn’t prove that a remote release will work with your camera model.
Look up the full camera and remote release model in the official documentation, and check whether an adapter is needed.
-
Choosing a cable without considering your table layout
A cable needs to run between the camera and the controls. Wireless operation removes the cable, but works only with a compatible camera.
Think about where you’ll place the camera and etching, and where your hand will be. Then check whether a cable can run freely or whether your camera supports wireless control.
-
Buying a separate remote release without trying the self-timer
A suitable built-in self-timer can delay a shot until after you press the camera’s shutter button.
Test the setting on your camera model from the fixed position you plan to use before deciding whether you want to take shots remotely straight away.
Brands to consider
Canon
For compatible EOS cameras, Canon describes both the wired RS-80E3 and control via the Camera Connect app.
- The Canon Netherlands Store lists a 2.5mm E3-type socket and compatible camera models for the RS-80E3.
- Check compatibility with your specific camera; the remote won’t automatically work with every Canon camera. The app option also requires camera support.
Fujifilm
The RR-100 is a wired option for the X and GFX cameras listed as compatible by Fujifilm.
- Fujifilm specifies a 2.5mm socket and includes an L-shaped plug extension cable.
- Fujifilm says an adapter from another manufacturer is required for the X-S10 and X-T200. Check the latest instructions for your exact camera model.
Nikon
The ML-L7 is a Bluetooth remote control for specific Nikon cameras; Nikon lists it as compatible with models including the Z 30.
- Nikon specifies a dedicated button for releasing the shutter.
- This doesn’t mean the ML-L7 works with every Nikon camera. Check support for your camera model.
Sony
The RMT-P1BT is a Bluetooth option for Sony cameras that support control with this remote.
- Sony describes operation without a cable or additional receiver.
- Check whether your camera supports a Bluetooth remote control. Sony says the quoted communication range may vary depending on the conditions.
Camera remote controls at Joybuy
This product selection covers wireless control for the Osmo Action cameras listed; check whether this type of camera is suitable for your etching set-up.
No image available
Osmo Action GPS Bluetooth Remote Controller for Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6
This wireless remote is designed for taking photos remotely with one of the listed Osmo Action models; check that your camera is compatible.
The product title specifies Bluetooth and compatibility with Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6.
View at Joybuy
Frequently asked questions
How can I check whether a remote release will work with my camera?
Compare your full camera model with the official information for the exact remote release model. For a cable, check both the socket and whether an adapter is needed. For Bluetooth, check specifically whether your camera supports a remote control.
Do I need to buy a remote control straight away for a single etching?
Not necessarily: try the self-timer first if your camera has one. The Nikon COOLPIX P1100 manual describes a delay to prevent camera shake caused by pressing the shutter button; check separately which settings are available on your camera.
What can I do if the remote control won’t pair or work?
First, check compatibility with your specific model and follow the pairing steps in your camera manual. For consumer purchases in the Netherlands, the seller must offer a solution if a product doesn’t meet what you could reasonably expect from it under normal use. According to the Dutch government, statutory warranty in the Netherlands has no fixed time limit.
Can I return a remote release bought online?
When you buy online as a consumer from a business, you generally have a statutory 14-day cooling-off period after delivery, with some exceptions. The Dutch government describes this cooling-off period for distance purchases; check which exceptions and return conditions apply to your purchase.