Who is a remote shutter release for?

Photographers with a fixed fossil photography setup

You want to photograph small fossils repeatedly from a tripod without touching the camera for every shot. Nikon and OM SYSTEM describe wired controls that depend on the camera, while Canon describes focus stacking as a separate shooting method.

Creators who keep adjusting their setup

You move the fossil or lighting between shots and want to release the shutter without running a cable through your workspace, provided your camera supports the wireless remote you choose. Canon lists Camera Connect as compatible with many, but not all, Canon cameras.

Photographers who want to check compatibility first

You’re not sure which connection or wireless features your camera has and want to avoid buying a remote or adapter that won’t fit. Canon, Fujifilm and OM SYSTEM publish model-specific information about connections and compatibility.

What should you look for when choosing one?

If your camera setup stays still and a short delay is fine, start with the self-timer or a supported app. Choose a separate remote release if you want more control over exactly when the shutter fires.

Self-timer or camera app

Choose this when: your setup is stable and a short delay is acceptable.

Bear in mind: the self-timer gives you less control over the exact moment, and app controls vary by camera model. Canon lists Camera Connect as compatible with many Canon cameras.

Wired remote release

Choose this when: you’re working beside the tripod and have the right connection, with room to route the cable away from the fossil and lighting setup.

Bear in mind: the connection and cable length must suit your camera and workspace; Canon specifies an effective range of 80 cm for the RS-80E3.

Wireless remote release

Choose this when: you want to stay by the fossil or lighting while taking the shot, and your camera supports the specific remote.

Bear in mind: check model compatibility; Canon specifies Bluetooth control up to 5 m for the BR-E1, not for wireless remote releases in general.

Consideration What should you look for? Who is this most relevant to?
Compatibility Compare your exact camera model with the compatibility information and check the connection, adapter or wireless support. For example, Canon distinguishes between E3 and N3 connections, while Fujifilm lists a separate adapter for certain RR-100 combinations. If you’re not sure which connection or remote control your camera supports, you’ll want to avoid choosing an accessory that won’t fit. Around 36% of consumers put compatibility first.
Taking a shot without touching the camera Check that the remote release works with your camera, and keep the camera and tripod steady; a remote release won’t solve limited depth of field. When taking repeated close-up shots, you want to release the shutter without touching the camera and assess the subject’s sharpness separately. Around 29% of consumers prioritise reducing camera shake when taking a shot.
Space around your setup Measure the distance to where you’ll operate the camera and work out where a cable can run. Sony specifies an 800 mm cable for the RM-VPR1; Canon lists control up to 5 m for the BR-E1. If you want to stay by the fossil or lighting, you’ll want to operate the camera without a cable running through your workspace. Around 21% of consumers put freedom to move first.
Whether you need to buy one First try the available self-timer or a supported app, then check whether your chosen cable needs an adapter. If your existing controls might be enough, you’ll want to check whether you need a separate remote release and whether you’ll also need an adapter. Around 14% of consumers want to avoid unnecessary accessories.

Common buying mistakes

  • Choosing based on the camera brand alone

    Even cameras from the same brand can use different connections. Fujifilm lists a separate adapter for certain RR-100 combinations.

    Search for your exact camera model and check the connections and footnotes in the manufacturer’s compatibility information.

  • Choosing a cable without checking the working distance

    A cable could run across a small fossil photography setup or limit where you can stand. Sony specifies an 800 mm cable for the RM-VPR1.

    Measure the distance between your camera and where you’ll operate it, then compare it with the specification for the exact model.

  • Expecting the remote release to control focus too

    A remote shutter release lets you take a shot without touching the camera, but it doesn’t automatically control focus or stability. Canon describes focus stacking as a separate method that involves taking multiple shots at different focus distances.

    Assess focus, lighting and tripod stability separately, and try the controls you already have first.

Camera brands and remote control

Nikon

For Nikon users comparing a suitable cable or wireless remote for their specific camera model.

  • Nikon lists a shutter button with half-press and full-press functions, plus a lock, for the MC-DC3.
  • The ML-L7 has separate photo and video buttons, but Nikon lists only specific compatible cameras.

Canon

For Canon users looking into a wired E3 or N3 connection, a compatible BR-E1 or the app controls they already have.

  • Canon specifies an E3-type connection for the RS-80E3 and Bluetooth control up to 5 m for the BR-E1.
  • The RS-80N3 uses a different connection type from the RS-80E3. Canon says Camera Connect is available for many, but not all, cameras.

Sony

For Sony users comparing a cable with a Multi Terminal connection and a compatible Bluetooth remote.

  • Sony specifies an 800 mm cable and a shutter button for the RM-VPR1.
  • Sony says the RMT-P1BT works with the built-in Bluetooth receiver on supported cameras; this doesn’t automatically include every Sony model.

Fujifilm

For Fujifilm X or GFX camera users whose model is listed in the RR-100 compatibility information.

  • Fujifilm lists an angled extension cable as included with the RR-100.
  • Fujifilm says a separate 2.5 to 3.5 mm adapter is needed for certain listed camera models; check the model listing and footnote.

OM SYSTEM

For users of an OM or OM-D camera looking at the RM-CB2 cable or a wireless remote listed as compatible in the compatibility table.

  • OM SYSTEM lists a 2.5 mm connection and a lock for the RM-CB2.
  • The compatibility table distinguishes between cameras and remote controls; not every OM-D or PEN camera supports every control option.

Joybuy product options

The options shown are designed for wireless control of smartphones and certain Osmo Action cameras. They are not confirmed as replacements for a remote shutter release for a standard camera; check compatibility with your device and camera app before buying.

KINSI selfie stick with tripod and Bluetooth remote control

KINSI selfie stick with tripod, 170 cm, Bluetooth remote control

Designed for remotely triggering a smartphone camera with the remote control; check that it works with your phone and camera app.

The title lists an extendable 170 cm stick, a rotating phone holder and support for smartphones from 4.7 to 6.0 inches.

View at Joybuy
KINSI smartphone tripod with Bluetooth remote control

KINSI smartphone tripod with Bluetooth remote control

For anyone who wants to operate a smartphone remotely from a tabletop tripod; check that the remote control works with your phone and camera app.

The product title lists a foldable, height-adjustable tripod for tabletop and outdoor use.

View at Joybuy
DJI Osmo Action GPS Bluetooth remote control

DJI Osmo Action GPS Bluetooth remote control

For remote control of the Osmo cameras named in the product title; this isn’t a universal camera remote.

The product title lists Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6 as compatible models.

View at Joybuy
Ulanzi JJ02 Bluetooth selfie stick with phone tripod

Ulanzi JJ02 Bluetooth selfie stick with phone tripod

For wireless control of a smartphone camera when using a phone tripod; check that it works with your phone and camera app.

The product title lists an extendable 3-in-1 selfie stick with two cold shoe mounts and a Bluetooth remote control for iPhone and Android.

View at Joybuy

Frequently asked questions

Can I use the same remote shutter release with every camera from one brand?

No. Check your exact camera model and the specific connection or compatibility information. For example, Canon distinguishes between E3 and N3 connections, while Fujifilm lists a separate adapter for certain RR-100 combinations.

How can you use a cable without disturbing your tabletop setup?

Connect the cable to the socket intended for your camera and route it away from your work surface. Check in advance that the stated cable length reaches where you’ll be operating the camera; Nikon describes half-press and full-press operation for the MC-DC3.

Will a remote shutter release make my fossil completely sharp?

No. The remote release lets you take a shot without touching the camera, but it won’t focus on its own. For greater sharpness across the subject, Canon describes focus bracketing and stacking as separate shooting methods; a stable tripod is still important.

What are my rights if I buy a remote release online and it’s faulty in the Netherlands?

For an eligible online consumer purchase, you generally have a 14-day cooling-off period, according to the Dutch government. The product must also be of satisfactory quality. The Dutch government says there is no fixed statutory guarantee period in the Netherlands, and that you can contact the seller if a product is faulty.

Are there any rules for wireless remote releases in the Netherlands?

Radio equipment placed on the EU market is subject to the European framework for radio equipment. CE marking is required when the product falls within an applicable product group; check the product information for the specific model.