Who is this for?

Photographer with an existing camera

You want to check that a remote release works with your camera model and connection before buying. Canon, Nikon and Fujifilm list options that depend on the model or connection.

Embroidery enthusiast with limited table space

You want to avoid disturbing your setup or running a cable across your embroidery. A self-timer lets you avoid touching the camera while taking the shot; Canon Netherlands recommends this approach for still-life photography.

Maker who wants to try things out before buying

You’re photographing a stationary subject and want to see whether the self-timer or a compatible camera app already gives you enough control. Canon Netherlands and Nikon Netherlands describe these options for compatible cameras.

What should you consider when choosing?

Built-in self-timer

Choose this if: your embroidery is stationary, your camera is secure and you can wait a moment.

Bear in mind: you won't take the picture immediately; Canon Netherlands lists a 2-second delay for still-life photography.

Wired remote shutter release

Choose this if: your camera has the right connection and you can run the cable beside your small table.

Bear in mind: connections vary. The Canon RS-80N3 uses an N3 connection, while the Fujifilm RR-100 has a 2.5mm connection. Some Fujifilm cameras require an adapter.

Bluetooth remote

Choose this if: you want to operate the camera without a cable and the remote is supported by your exact camera model.

Bear in mind: Bluetooth alone doesn't confirm compatibility; check the manufacturer's list of compatible camera models.

Camera app on your smartphone

Choose this if: your camera supports the relevant app and you want to try an existing option first.

Bear in mind: controls and available features vary by camera model; Nikon limits SnapBridge's remote-control function to supported cameras.

What to consider What should you check? Who is this important for?
Compatibility Check the exact camera model. For a cable, also compare the connection type and check whether an adapter is needed. If I buy an accessory, I want to avoid finding that it doesn't fit my existing camera. Around 33% of consumers give compatibility top priority.
Movement when taking the shot Set the camera up securely and try a test shot with the self-timer first. For tiny stitches, I want to take a picture without touching the camera at the moment of capture. Around 27% of consumers prioritise close-ups with minimal movement.
Space around the table Consider where the cable can run, or choose wireless control only if your camera supports it. With limited workspace, I want to move my hands freely around my embroidery. Around 20% of consumers give a clear, easily accessible setup top priority.
Additional purchase Try the built-in self-timer and check whether your camera supports control via a compatible app. Before I buy anything, I want to know whether a feature I already have is enough for a stationary subject. Around 20% of consumers want to avoid unnecessary purchases in the first instance.

Common buying mistakes

  • Choosing a remote based only on the camera brand

    Support varies by camera model and connection. Some Fujifilm RR-100 combinations require an additional adapter.

    Before ordering, compare your full camera model and its connection with the manufacturer's compatibility information.

    If the release doesn't fit, you may still need to buy a different accessory or an adapter.

  • Expecting a remote shutter release to fix every blurry close-up

    A remote release can help you avoid touching the camera when taking a shot, but accurate focusing and a stable support are still important for close-ups.

    Start by taking test shots with the camera set up securely and the self-timer switched on. Then decide whether you still need direct control.

  • Assuming a phone app works the same way with every camera

    Canon and Nikon state that app features depend on the camera being supported.

    Check your exact camera model and test the app's remote-control function before deciding whether to buy a separate release.

Brands to consider

Canon

For supported cameras, Canon offers a range of options, including wireless and wired remote control and a smartphone app.

  • Canon lists a Bluetooth range of 5 m and a separate AF-start button for the BR-E1.
  • The RS-80N3 has an N3 connection and an 80 cm cable; Canon Camera Connect works with compatible cameras.
  • Check the compatibility list for the BR-E1 and your camera's connection for the RS-80N3. These features don't apply to every Canon remote.

Nikon

The ML-L7 is a Bluetooth option for specific Nikon cameras; SnapBridge can also act as a remote control with supported models.

  • Nikon lists separate photo and video buttons on the ML-L7.
  • Check separately whether your camera model is supported; remote-control features vary by model.

Sony

The RMT-P1BT is a Bluetooth remote for cameras that support this model.

  • Sony describes control via the camera's built-in Bluetooth receiver, with no additional receiver required.
  • This doesn't mean the remote works with every Sony camera. Sony also distinguishes between cameras that support Creators’ App and Imaging Edge Mobile.

Fujifilm

The RR-100 is a wired remote release for the Fujifilm X and GFX cameras listed as compatible.

  • According to the Dutch product information, the RR-100 has a 2.5mm connection and its button can be half-pressed to focus.
  • Some of the camera models listed require a third-party adapter; check the information for your exact model.

Joybuy products

This product selection features a Bluetooth remote for specific Osmo cameras. Before choosing this accessory for your embroidery setup, check that your camera is one of the listed models.

Osmo Action GPS Bluetooth remote

Osmo Action GPS Bluetooth remote

This Bluetooth remote is designed to control the listed Osmo cameras. Choose it only if your camera model is compatible.

The product name lists compatibility with Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6.

This remote is not described as a universal camera accessory.

View at Joybuy

Frequently asked questions

Do I need to buy a remote shutter release if my embroidery is stationary?

Not necessarily. For stationary subjects on a stable support, Canon Netherlands also recommends using the 2-second self-timer, so you don't have to touch the camera just before taking the shot. Check which self-timer options your camera has.

How can I focus without disturbing my setup?

Set the camera up securely and check the focus with test shots. Some remote releases offer separate focus controls: Canon lists an AF-start button for the BR-E1, while Fujifilm's RR-100 has a button that can be half-pressed. Check that the remote you choose works with your camera.

Do I always only need the cable for a Fujifilm RR-100?

Not with every camera combination. Fujifilm's Dutch product information states that certain models require an additional adapter. Check the details for your exact camera before ordering.

What rights do I have as a Dutch consumer when shopping online?

According to the Dutch government, most eligible online purchases from a business come with a 14-day cooling-off period, although exceptions may apply. If a product is faulty, contact the seller to arrange a solution.