For a single photo, try the self-timer or an app supported by your camera first; that way, you won’t need to touch the camera when taking the shot. A separate remote shutter is useful if you want to take several shots in a row or can’t reach the camera. Check support for your exact camera model beforehand: a cable takes up space on a small table, while wireless control requires compatibility and pairing.
Who is this guide for?
Photographers with a permanent tabletop setup
You want to keep the framing consistent when photographing your collage board, and need a way to take the shot without touching the camera. Canon Netherlands lists the self-timer and a remote control as possible options.
Photographers with limited workspace
Your camera is close to paper and other materials, so where you place the controls and route any cable matters. Also check that your chosen remote shutter is compatible with your camera model.
Creators taking several photos in a row
After rearranging your display, you want to take another shot without having to reach for the camera body each time. A wireless remote control is only an option if your specific camera supports it.
What should you look for when choosing?
First check that your camera model is supported. Then decide whether a timer, cable or wireless control will work best with your table layout.
Self-timer or camera app
Choose this if: you occasionally photograph a stationary board and your camera supports the feature.
The trade-off: the self-timer delays the shot, while app control depends on your camera model. Canon Netherlands lists Camera Connect as an option for many, but not all, cameras.
Wired remote shutter
Choose this if: you want to take several shots without touching the camera body and can route the cable clear of the collage area.
The trade-off: Canon Netherlands lists the RS-60E3 with an E3 connector and a 60 cm cable, and the RS-80N3 with an N3 connector and an 80 cm cable. The connectors are not interchangeable.
Wireless camera remote
Choose this if: you don’t want a cable across your work surface and your exact camera model supports the remote you’ve chosen.
The trade-off: support, pairing and settings vary by camera model; Bluetooth alone doesn’t confirm that a remote will work.
| What to consider |
What should you check? |
Who should prioritise this? |
| Compatibility |
Check the full camera model and the connector or remote-control support required. |
If I want to be sure the remote shutter can operate my camera, I check the exact model rather than just the brand. Around 33% of consumers say compatibility is their main purchasing concern. |
| Movement when taking the shot |
Check whether the self-timer will do the job, and make sure your camera setup is stable. |
If I don’t want to disturb the framing by pressing the camera body, I look for a way to take the shot remotely or with a delay. Around 27% of consumers prioritise keeping their framing stable. |
| Available table space |
Decide where the camera, your hands and any cable will go; choose wireless control only if it’s explicitly supported. |
If I want to rearrange collage items without a cable across my work surface, I pay attention to where the controls will sit. Around 20% of consumers say having clear workspace is their main purchasing concern. |
| Do you need a separate accessory? |
First try a supported self-timer or camera app if either suits the way you work. |
If I only occasionally photograph a stationary board, I first want to check whether an existing camera feature is enough. Around 20% of consumers mainly want to avoid buying a remote shutter they don’t need. |
Common purchasing mistakes
-
Assuming every Bluetooth remote works with a Bluetooth camera
Bluetooth support doesn’t automatically mean that the camera also supports remote control via Bluetooth.
Compare the full camera model with the compatibility information for your chosen remote.
-
Assuming camera connectors are interchangeable
Canon lists separate E3 and N3 connectors; for some RR-100 combinations, Fujifilm specifies a separate adapter.
Before buying, check your camera model, the connector and whether your combination needs an adapter.
-
Confusing a smartphone remote with a camera shutter release
A bundle with a smartphone holder and controls for compatible smartphones won’t automatically operate a separate camera.
First decide whether you’re taking photos with a smartphone or a camera, then check what the remote is designed to work with.
Relevant camera brands
Canon
A relevant choice for Canon users considering a wired remote shutter or supported control via a camera app.
- Canon Netherlands describes the RS-60E3 for an E3 connector and the RS-80N3 for an N3 connector; the cables listed are 60 cm and 80 cm long respectively.
- Check your exact camera model: E3 and N3 are different connectors. Canon says Camera Connect works with many, but not all, cameras.
FUJIFILM
The RR-100 is a wired option for camera models on Fujifilm’s compatibility list.
- Fujifilm lists a right-angle extension cable for a 2.5 mm connector as included.
- For some models on its compatibility list, Fujifilm also specifies a separate third-party adapter.
Sony
The RMT-P1BT is a wireless option for cameras Sony lists as compatible with Bluetooth remote control.
- According to Sony, the RMT-P1BT uses the camera’s built-in Bluetooth receiver, with no cable or extra receiver needed.
- Check support for your specific camera model and follow the required Bluetooth settings and pairing steps.
Nikon
The ML-L7 is a Bluetooth option for specific Nikon cameras.
- Nikon lists separate buttons for taking photos and recording video.
- Compatibility is limited to specific camera models, not automatically every Nikon camera.
Choosing a product at Joybuy
This product selection is for wireless control; it’s only relevant if you use one of the Osmo models listed.
Image unavailable
Osmo Action GPS Bluetooth remote control
Relevant for wireless control if you use one of the Osmo models listed below.
Bluetooth control; according to the product title, compatible with Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6.
View at Joybuy
Frequently asked questions
How can you stop the camera moving when photographing a collage board?
Set the camera up securely and, if your camera has the feature, use the self-timer or a suitable remote control. Canon Netherlands lists both as ways to take a photo without touching the camera body at the moment of capture.
Will a Bluetooth remote work with any camera that has Bluetooth?
No. Check whether your exact camera model supports Bluetooth remote control. Sony also describes separate settings and a pairing process.
What should you look for in a wired remote shutter?
First check your camera’s connector and think about how to route the cable clear of the collage area. For some camera models on the RR-100 compatibility list, Fujifilm specifies a separate adapter.
What are your rights when buying online in the Netherlands?
For online consumer purchases, you generally have a 14-day cooling-off period, although the Dutch government lists some exceptions. You’re also entitled to a product that meets the required standards. According to the Dutch government, the Netherlands has no fixed statutory guarantee period; if a product is faulty, contact the seller.