If the hall’s reverberation is distracting, or you want to capture one drum clearly, start with a directional microphone close to the sound source. If you want to record several instruments together and the hall sounds good from your chosen position, consider a stereo pair. Check the inputs and phantom power first, and make a test recording.
Which setup is right for you?
Recording in a reverberant hall
If your main aim is to capture one drum or percussion source clearly without making the hall the focus, try a directional microphone placed close by. Shure describes various microphone techniques for drums; the right choice also depends on the source and its placement.
Recording a percussion ensemble
If you want to capture the interplay and relative positions of several instruments, try a stereo setup from the intended recording position. Shure describes techniques for recording drums in stereo.
Recording rehearsals on the move
If you want to record in different locations without first building a fixed setup from separate microphones, consider a portable recorder with built-in stereo microphones. Check whether the recorder also has the connections you’ll need later.
What should you consider when choosing?
First decide whether you want to record one source separately or the ensemble as a whole. Then consider the reverberation at the recording location and check that your recorder or interface has the inputs and power you need.
| What to consider |
What to look for when buying |
Who is this important for? |
| Direct sound or room reverberation |
Check whether you can position the microphone close to the source safely and in the right direction; compare test recordings from different positions. |
I want to hear one drum clearly, rather than mainly the hall’s reverberation; around 36% of consumers put direct sound first. |
| The ensemble in stereo |
Check whether you need two microphones, two inputs and phantom power, and whether the offer really includes a pair. |
I want to preserve the balance between several instruments; around 29% of consumers prioritise the cohesion of the ensemble. |
| Loud strikes |
Check the specifications for the exact model and test the loudest strikes with your recorder or preamp. |
I want to record loud percussion without overloading the recording chain; around 21% of consumers put loud peaks at the top of their list. |
| A portable recording setup |
Decide whether you need a separate microphone for existing equipment or a recorder; check the inputs, power and monitoring options. |
I want to record in different locations without having to build a fixed setup each time; around 14% of consumers give portable convenience top priority. |
Common buying mistakes
-
Mistaking a single microphone for a stereo pair
A product range may include both individual microphones and pairs. The manufacturer lists one microphone in the box for the AKG P170.
Before buying, check what’s included and whether your recording equipment has enough inputs for the setup you have in mind.
A stereo setup may require a second microphone, an extra input, a cable and a stand or mount.
-
Choosing an overhead without listening to the room first
A microphone placed high up may pick up more of the room. That can be a drawback if the reverberation doesn’t suit the sound you’re after.
Make a test recording at the planned height and compare it with a lower or closer microphone position.
-
Assuming every microphone will work with your equipment
Connections and power requirements vary by model and setup. The RØDE NT5, for example, requires P48 phantom power.
Compare the requirements of the exact model with the inputs and power available on your recorder or interface.
Some setups require a suitable recorder or interface with the right power supply.
Brands to consider
Shure
Shure documents the SM57, a dynamic microphone, for close-miking drums and percussion.
- Its cardioid pattern is designed to emphasise the intended sound source.
- One SM57 is not a stereo pair for recording an entire ensemble.
sE Electronics
The sE7 is a small-diaphragm condenser microphone for applications including percussion and overheads; it is also available as a matched pair.
- The manufacturer specifies switchable −20 dB attenuation and an 80 Hz low-cut filter.
- Check whether the offer includes one microphone or a pair; the manufacturer’s claims about its sound don’t guarantee the results in your hall.
AKG
AKG describes the P170 as a small-diaphragm condenser microphone for applications including overheads and percussion.
- The manufacturer specifies a cardioid polar pattern and switchable −20 dB attenuation.
- The official package includes one microphone; if you want to record in stereo, choose your purchase and check your number of inputs accordingly.
RØDE
The NT5 is a small-diaphragm condenser microphone for applications including drum overheads, and is available individually or as a matched pair.
- The manufacturer’s current product page lists P48 phantom power as a requirement.
- Check the specifications for the exact model; don’t rely on a maximum SPL figure without verifying it.
Zoom
The H5studio is a portable recorder with built-in XY microphones, for anyone looking for a recorder rather than just a separate microphone.
- Zoom specifies built-in stereo microphones and two inputs for external microphones.
- The listed features don’t tell you how the recorder will sound in a particular hall; the position of the device also determines where its built-in microphones are placed.
Products related to this topic
Related products coming soon.
Frequently asked questions
Do I need extra equipment for a condenser microphone?
It depends on the model and the equipment you already have. The RØDE NT5 requires P48 phantom power via XLR; the Zoom H5studio has two XLR/TRS inputs that can supply +48 V. Also check whether you need two microphones and suitable inputs for stereo recording.
How should I start positioning microphones in a reverberant hall?
Listen from the intended position and make short test recordings. If overheads pick up too much room sound, try positioning them lower or recording one source from closer by; Shure notes that a high overhead position can capture more of the room.
What can I try if low room noise or footsteps are picked up?
First, try moving the microphone. The manufacturer-specified 80 Hz low-cut filter on the sE7 may help reduce low rumble or footsteps; listen to check whether it also removes any low frequencies you want to keep.
Who can help if a microphone develops a fault after I buy it in the Netherlands?
For a consumer purchase, a product must conform to the contract, and the seller must provide a solution if it’s faulty. The Dutch Government says there is no fixed statutory guarantee period for all products in the Netherlands; a manufacturer’s guarantee may also apply.
Can I share a recording from the community centre with other people?
Not necessarily. You may need permission from the copyright holder to distribute other people’s copyright-protected music; the Dutch Government says a private copy for personal use must not be distributed. If identifiable people are recorded and their personal data is processed, you need an applicable legal basis under the GDPR. The rules that apply depend on the content and how the recording is used.