Start with a test recording and adjust the microphones’ distance and position if the room reflections sound too pronounced. A stereo pair captures both violins together with a sense of space, while two separate microphones give you more individual control. A recorder with built-in X/Y microphones is an easier place to start, but finding a good spot in the room still matters. If you’re using separate condenser microphones, check that you have the necessary inputs and phantom power.
Who is this approach suitable for?
Duos playing in a reverberant room
You want to record both violins together, but can hear distracting reflections. Make a test recording and try different microphone distances. Shure suggests positioning the microphone close to the sound source as one possible approach in challenging acoustic conditions.
Duos who want to mix each player separately
You want to be able to adjust the balance for each player and can position two microphones separately, connecting each to your recording equipment. Shure describes recording closer to the source and attaching a microphone to the instrument as possible techniques.
Duos who want a quick set-up
You want to make a stereo recording of both players together with minimal separate equipment, and understand that the recorder’s position in the room still matters.
What should you look for when choosing?
Matched cardioid stereo pair
Choose this if: you want to record both players together as a stereo image and can move the microphones around.
Bear in mind: stereo also captures details of the room; a stereo pair won’t eliminate reverberation.
Two separate instrument microphones
Choose this if: you want to be able to adjust the microphone position or level for each violinist separately.
Bear in mind: you’ll need two microphones and suitable inputs. If you attach a microphone to an instrument, listen out for mechanical noise too.
Recorder with built-in X/Y microphones
Choose this if: you want to get started without a separate stereo pair and record both players together.
Bear in mind: where you place the recorder in the room still matters, and built-in microphones don’t let you position a separate microphone for each violinist.
Microphones attached to the instruments
Choose this if: the violinists’ movement makes it difficult to maintain a fixed microphone distance.
Bear in mind: you’ll need the right microphone, clip and connection for each violin; attaching a microphone can pick up mechanical noise.
The considerations below will help you decide which trade-off matters most for your recording.
| Consideration |
What to look for when buying |
Suited to |
| Room sound |
Check whether you can position the microphone or recorder at different distances, and listen to a test recording first. |
If I want to reduce distracting reflections, I want to be able to try different positions. Around 36% of consumers prioritise reducing room sound. |
| Separate balance |
Decide whether you want to capture one shared stereo balance or need a separate microphone position and input for each player. |
If I want to adjust the two violins separately, control over each player matters more than one shared balance. Around 29% of consumers prioritise this individual control. |
| Quick stereo set-up |
Compare a built-in X/Y pair with two separate microphones, and listen to see whether the room sound is acceptable from your chosen position. |
If I want to record a shared stereo image quickly, I look for a set-up with minimal separate equipment. Around 21% of consumers prioritise simplicity when recording in stereo. |
| Completeness of the recording chain |
For each option, check whether you’ll need two microphones, enough inputs, suitable power, cables and mounts. |
I want to know in advance what I’ll need to record two violins, so I can assess the complete set-up. Around 14% of consumers focus mainly on the completeness and additional costs of the recording chain. |
Common buying mistakes
-
Expecting cardioid microphones to eliminate room reverberation
As well as capturing the players’ positions, a stereo pair records acoustic details of the room. Choosing cardioid microphones won’t automatically make a reverberant room sound quiet.
Make a test recording and experiment with distance and direction before settling on your set-up.
-
Mistaking a single microphone for a complete duet set
The RØDE NT5 is also available as a matched pair. The Shure PGA81 comes in versions with and without an XLR cable, and requires phantom power.
Check the exact version and work out in advance which microphones, inputs, cables and power you’ll need for your complete recording chain.
-
Mistaking a violin clip for a complete solution for two players
DPA describes the VC4099 as a separate clip for a violin. For two violins, you’ll need to assess the configuration for each instrument; an attached microphone may also pick up mechanical noise.
Check the microphone, clip and connection for each violinist, and listen for unwanted noise while they play.
Brands to compare
These brands offer different microphone and recorder set-ups; their inclusion here is not a judgement on which solution sounds best.
RØDE
The M5 is a matched cardioid stereo pair. The NT5 is also available as a matched pair for recording both players together in stereo.
- According to RØDE, the M5 set includes mounts and windshields.
- A stereo pair won’t automatically resolve room reflections; check whether the NT5 version on offer is a pair.
Shure
The PGA81 is a cardioid XLR instrument microphone to consider if you want a separate microphone for each violin.
- Shure’s specifications state that the PGA81 requires phantom power.
- Versions are available with and without a cable. Shure notes that simply changing microphones won’t necessarily fix a violin sound that seems thin if the distance remains unsuitable.
Zoom
The H4essential is a portable recorder with built-in X/Y microphones and two XLR/TRS inputs.
- The manufacturer lists built-in X/Y microphones, two XLR/TRS inputs and 32-bit float recording.
- These features don’t make the recorder’s position in the room irrelevant; if you’re using external microphones, check that the connections and power are suitable.
LEWITT
The LCT 040 MATCH stereo pair is a matched cardioid pair for a two-microphone set-up.
- According to LEWITT, mounts, windshields and a carry case are included.
- The manufacturer’s claims about sound and spaciousness are not an independent comparison with other models.
DPA
The 4099 with the separate VC4099 violin clip is an attachable microphone option when it’s difficult to maintain a fixed distance from a moving violinist.
- DPA lists the VC4099 as a clip for a violin.
- For two violins, check the complete configuration for each instrument. Shure’s general guidance warns that a microphone attached to an instrument may pick up mechanical noise; this is not a measurement of the DPA 4099.
Joybuy products
Related products coming soon.
Frequently asked questions
Will a more expensive microphone solve the reverberation in my room?
No, a more expensive microphone won’t automatically remove room reflections. Shure highlights position, distance and isolation as factors to consider in a room with challenging acoustics. Make test recordings with both violins before choosing your set-up.
Do I need phantom power for two XLR condenser microphones?
It depends on the microphones and recording equipment. Shure says the PGA81 requires phantom power, and RØDE specifies P48 for the NT5. Check that your recorder or interface provides the required power and enough suitable inputs.
What can I try if the duet sounds unbalanced after set-up?
Make a short test recording and first try changing the microphone position or distance. With separate microphones, you can adjust the position for each player; when recording both together in stereo, the position of the two violinists in relation to the stereo pair also matters.
Who should I contact if a microphone is faulty in the Netherlands?
According to the Dutch government, the retailer must provide a solution if there’s a problem with a product. The Netherlands has no fixed statutory guarantee period; any manufacturer’s warranty is separate.