A rechargeable LED night light with a motion sensor can be handy in a dark hallway, wardrobe, bedroom or underneath a kitchen cupboard. It switches on when you come close, so you don’t have to search for a switch. However, not every model is suitable for every spot.
Look out for these three common pitfalls:
First, measure the space where you plan to put the light. A slim model is more practical than a round table lamp for a narrow shelf or the side of a wardrobe. For example, a light that’s 10 mm thick can be fitted behind a wardrobe door or underneath a shelf.
If you’re installing it without drilling, check:
A no-drill wardrobe light is best suited to dry indoor spaces. Don’t use this type of lighting in a damp bathroom or right next to a hob unless the product information specifically confirms it’s suitable.
An LED light with a motion sensor can detect movement within a certain range. The models listed below are specified with a PIR sensor and a range of 3 to 5 metres. PIR stands for passive infrared: the sensor detects changes in heat radiation caused by movement.
Also check whether the sensor only works in the dark. Some models have a light threshold, such as 20 or 40 lux. This stops the light from switching on repeatedly during the day, but it can also mean it won’t respond straight away in a dimly lit room.
The right light colour depends on how you plan to use it:
An LED light with adjustable colour temperature gives you more flexibility. Check the battery capacity too. A 1,100 mAh battery has a higher capacity on paper than a 500 mAh one, but actual battery life depends on brightness, how often the light switches on and the sensor settings.
Why it suits this need: At 30 cm long, it fits in many kitchen cupboards, on shelves and in smaller wardrobes. The pack contains two lights, so you can illuminate more than one area.
The product specifications list 41 LEDs, a PIR range of 3 to 5 metres and three colour temperatures. That means you don’t have to rely on a general brightness claim alone.
30 cm long, 10 mm thick, 1,100 mAh battery, USB charging and drill-free installation with an adhesive strip.
Why it suits this need: The longer light bar is a good fit for wide kitchen cupboards or wardrobes, where a shorter model may not spread the light as evenly.
The length, number of LEDs and colour settings are clearly specified: 40 cm, 61 LEDs and 6,500–7,000 K, 4,500–5,000 K or 2,800–3,200 K.
Two lights, a 1,100 mAh battery per light according to the product information, USB charging and a slim 10 mm profile.
Why it suits this need: This model is designed for anyone who wants to adjust the brightness and light colour as well as have the light switch on automatically, whether it’s for a bedroom, nursery or hallway.
The product information lists five dimming settings, three light colours, a sensor range of 3 to 5 metres and a light threshold of up to 20 lux.
500 mAh rechargeable battery, USB charging, 30 lumens, five brightness levels and, according to the product specifications, up to 10 hours of use in sensor mode.
We’ve put together a complete, up-to-date list of products that meet these strict selection criteria and the applicable European safety requirements.
Position a sensor light so that movement crosses the sensor’s field of view. If you walk directly towards the sensor, it may respond less quickly in some situations. Test the light before fixing the adhesive strip in place permanently.
Only use a suitable USB power source for charging, as specified in the product information. Keep the light dry, don’t cover any ventilation openings and clean the surface with a soft, dry cloth. A wireless LED light isn’t automatically suitable for outdoor use; always check the stated IP rating and safety instructions.
It depends on the battery capacity, brightness, how often the light switches on and the mode you use. The product specifications for a 500 mAh model state up to 10 hours in sensor mode. Other models don’t have a specified battery life. Treat these figures as product specifications, not a guarantee for every household.
A light that only switches on when it detects movement and it’s dark will usually be on for less time than one that stays on continuously. Actual power consumption depends on the wattage, brightness setting and how often it’s used. Rechargeable models also use USB charging rather than being permanently connected to a mains socket.
Not on every surface. A smooth, clean and dry surface is usually best for adhesive mounting. Adhesion may be weaker on dusty, rough, damp or porous surfaces. Clean the area first and let it dry, then check that the light is firmly attached before closing the wardrobe door.