Who are these pedals for?

Rally driver without a permanent cockpit

You practise at a desk or in a shared room and want to put the pedals away afterwards. So check their dimensions, whether they can brace against a sturdy surface, and how stable your chair and floor are. Logitech G describes floor and desk supports for RS Pedals; Fanatec mentions rear support plates for CSL Pedals.

Rally driver looking to practise braking pressure

You want to adjust the feel of the brake and have somewhere stable to position or secure the pedals. Compare the mounting requirements for load-cell brakes, not just the stated sensor force. Heusinkveld specifies that Sprint pedals must be mounted on a very rigid base.

Rally driver with an existing wheel

Your choice depends on your PC or console and how the pedals connect to your wheel base. If you practise in a manual rally car, also check whether the set includes a clutch or whether one can be added separately.

What should you look for?

Two pedals without a permanent cockpit

Choose this option: if you mainly need an accelerator and brake and want to put the set away after practising.

Consider: check the connection and make sure your chair, floor and support point stay stable when you brake.

Load-cell brake with suitable mounting

Choose this option: if you want to practise braking pressure and can position or mount the pedals securely.

Consider: the required base varies by model; Heusinkveld specifies a very rigid base for Sprint.

Set with a clutch

Choose this option: if you actually want to use a clutch pedal while practising.

Consider: a third pedal needs extra foot space; the clutch is a separate upgrade for the standard CSL set.

First measure the space for your pedals and chair, then check the connection, and only then decide whether you need two or three pedals.

What to consider What should you check? Who is this important for?
Practising securely and putting the pedals away Measure the available floor space and check that your chair, pedals and support point stay stable. If I want to put the pedals away after practising, the setup needs to stay in place when I brake; around 33% of consumers prioritise a stable floor setup that can be put away.
Control over braking pressure Compare the brake sensor type, adjustment options and specified mounting requirements. If I want to practise braking points by feel, I need a brake that suits both my settings and my surface; around 27% of consumers prioritise adjustable brake feel.
Connecting to your existing system Check your exact wheel model and platform, and whether you need USB, RJ12 or an adapter. If I want to keep using my existing wheel and console or PC, I need to make sure the pedal connection suits that combination; around 27% of consumers start by checking compatibility.
With or without a clutch Check how many pedals the set includes and whether a clutch can be added later. If I want to practise in rally cars with a clutch, I need a third pedal; around 13% of consumers prioritise having a usable clutch.

Avoid common buying mistakes

  • Assuming a high load-cell rating means the pedals will be stable

    The brake specifications don’t tell you whether the pedals will stay in place on your floor. Heusinkveld specifies a very rigid base for Sprint, while other manufacturers describe specific options for floor use.

    Check the mounting instructions for the exact model and test whether your chair and pedals move under braking pressure.

    If the floor setup isn’t stable enough, you may need a suitable, sturdy pedal plate or another mounting solution.

  • Assuming a console connection will always work directly

    You may need to connect a pedal set through a wheel base. For T-LCM on a console, Thrustmaster specifies an RJ12 connection through a Thrustmaster wheel base; Logitech says RS Pedals don’t work directly with a console.

    Before choosing, check the complete connection path from the pedals to your exact wheel and platform.

    Some combinations require a compatible wheel base or a separate adapter.

  • Assuming a two-pedal set includes a clutch or a load-cell brake

    The standard Fanatec CSL Pedals include an accelerator and brake with Hall sensors. The clutch and load-cell brake are separate upgrades.

    Check what’s included with the exact version and whether it suits the rally cars you want to practise in.

    Adding a clutch or upgrading the brake later means buying a separate part for your setup.

Brands to compare

Logitech G

RS Pedals are worth considering if you’re looking for a load-cell brake with the floor and desk supports described by Logitech.

  • Logitech describes brackets with rubber grips for use on a desk.
  • The pedals don’t work directly with a console; check whether your wheel combination requires a Racing Adapter.

Fanatec

The CSL Pedals start as a two-pedal set and can be upgraded with a clutch or load-cell brake.

  • Fanatec describes rear plates that let the set brace against a wall or hard surface.
  • The standard set has Hall sensors, not a load-cell brake. According to Fanatec, connecting directly to a PC via USB requires a separate ClubSport USB Adapter or the load-cell upgrade.

Thrustmaster

T-LCM is a three-pedal set for anyone looking for a load-cell brake and clutch who can check that it connects to their existing system.

  • Thrustmaster lists adjustable brake springs and pedal positions.
  • On a console, Thrustmaster says T-LCM must connect via RJ12 to a Thrustmaster wheel base; don’t use USB and RJ12 at the same time.

MOZA Racing

SR-P offers a load-cell brake, with a two-pedal version that you should check separately.

  • MOZA lists an anti-slip mat and adjustable pedal spacing; for the two-pedal set, the manufacturer gives dimensions of 410 × 310 × 170 mm.
  • An anti-slip mat doesn’t prove that the set will stay stable on every floor without additional mounting.

Heusinkveld

The Sprint 2-pedal set is a PC option for anyone who already has a very rigid pedal base or full-frame rig.

  • Heusinkveld describes extensive adjustment options.
  • The manufacturer specifies mounting on a very rigid base, so simply placing it on the floor in a small room may not be suitable.

Wheel and pedal sets at Joybuy

These are complete wheel and pedal sets for anyone looking for a wheel as well as pedals; check that the stated PC or console connection suits your setup for each model.

Logitech G G923 Black USB 2.0 wheel with pedals

Logitech G G923 Black USB 2.0 wheel with pedals

A complete wheel and pedal set if you’re also looking for a wheel for PC or Xbox.

The product information lists TRUEFORCE, a 900-degree rotation range and a progressive spring brake pedal.

View at Joybuy
Trust GXT 289 Movi-Racing Wheel with pedals

Trust GXT 289 Movi-Racing Wheel

A wheel with separate accelerator and brake pedals for PC; the desk clamps mentioned may be useful if you don’t have a permanent cockpit.

The product information lists a 270-degree rotation range and vibration feedback.

View at Joybuy

Frequently asked questions

Can I use load-cell pedals without a cockpit?

It depends on the set, your chair, your floor and what the pedals can brace against. Logitech describes floor and desk supports for RS Pedals, and MOZA lists an anti-slip mat for SR-P; Heusinkveld, by contrast, specifies a very rigid mounting base for Sprint. A stated sensor force alone doesn’t prove that the pedals will stay stable.

How do I connect Thrustmaster T-LCM?

According to Thrustmaster, T-LCM must connect to a console via RJ12 through a compatible Thrustmaster wheel base. On a supported Windows PC, the set can connect to the base via RJ12 or directly to the PC via USB; don’t use both pedal cables at the same time, and follow the manufacturer’s calibration instructions.

Should I buy an extended warranty, and how long do I have to cancel an online purchase?

Buying an extended warranty isn’t the same as having a legal guarantee. ACM ConsuWijzer explains that even without buying extra cover, you can contact the seller if a product doesn’t perform as you could reasonably expect under normal use. For a standard online consumer purchase, you generally have up to 14 days after delivery to change your mind, subject to legal exceptions.

Is a CE marking a quality mark for better braking performance?

No. The Dutch government describes CE as a marking associated with applicable legal product requirements, not as a comparative performance test. The CE requirements that apply depend on the specific product; a CE marking on its own doesn’t tell you how well a pedal brakes.