Who is this guide for?

Creators dealing with audible booth sound

If you record voices in a small space where reflections or background noise are audible, consider both the microphone position and its polar pattern. Shure and Acoustics.com identify positioning and room acoustics as important considerations; a directional microphone will not soundproof the booth.

Directors recording scenes with several performers

When several performers speak at the same time, the choice is between recording them together and creating separate voice tracks that are easier to edit. Shure explains that an omnidirectional microphone can pick up sound from several directions, but does not favour one performer over the others.

Creators recording separate voice roles

If you record roles one at a time, weigh the level of vocal detail you want against the booth acoustics and the equipment you’ll need. Audio-Technica describes the AT2020 as a cardioid XLR condenser microphone; this model requires a suitable power supply and an XLR connection.

What should you consider when choosing?

First, decide whether you want one recording of everyone together or need separate tracks. Then consider the booth, the performers’ positions and how the microphone will connect to your recording equipment.

Shure recommends assessing microphone positions and distances in the actual recording environment. A directional microphone may pick up less sound from outside its preferred direction, but it will not eliminate reflections or other voices.

Consideration What to look for Who is this mainly for?
Booth sound and background noise Compare speaking distances and microphone positions, and listen to a test recording made in the booth. If my main concern is reducing reflections or background noise, I’ll consider both positioning and polar pattern. Around 33% of consumers give booth sound top priority.
Separating voices during scenes with several performers Decide how many performers will speak at once and how many separate tracks and inputs you’ll need. When performers speak at the same time, I want to be able to edit their voices separately later. Around 27% of consumers prioritise keeping performers’ voices separate.
Detail in individual voices Listen to both a quiet and a loud passage, and check the power requirements for each model. If I record roles separately, vocal detail may matter more than the convenience of one shared recording. Around 20% of consumers make this their top consideration.
Connectivity and monitoring Check the exact USB or XLR version and how many inputs your recording setup supports. I want to record easily on my computer or be able to change my recording setup later. Around 20% of consumers place the most importance on ease of connection.

Common buying mistakes

  • Assuming a directional microphone provides complete sound isolation

    A directional microphone can still pick up sound within its recording area. Shure also clarifies that Voice Isolation on products including the MV7+ does not guarantee that other voices or occasional noises will disappear.

    Make a test recording in the booth with the performers and any potential sources of background noise in their usual positions.

    Allow time for retakes or for adjusting the microphone position and the room.

  • Putting everyone on one microphone when you need to edit their voices separately

    A shared microphone records the performers together and does not automatically give you separate control over each voice.

    Decide in advance how many performers will speak at the same time and whether you want to edit their voices separately later.

    A setup with separate microphones may require extra microphones, stands and interface inputs.

  • Treating an XLR model as a complete USB recording setup

    Connections and power requirements vary between specific versions. The Audio-Technica AT2020, for example, is an XLR model, not automatically a USB microphone.

    Check the full model name, connection, included accessories and compatibility with your recording equipment.

    Depending on the microphone you choose, you may need an interface or mixer, a cable and a power supply.

Brands to compare

Shure

The SM58 is a dynamic cardioid vocal microphone; the MV7+ is a separate range with USB-C and XLR.

  • According to Shure, the SM58’s polar pattern and built-in filter help reduce sound from outside its preferred direction and plosive sounds respectively.
  • Shure warns that Voice Isolation on products including the MV7+ does not guarantee that other voices or occasional noises will disappear. This feature does not necessarily apply across the entire product range.

RØDE

The PodMic USB is a dynamic speech microphone with USB-C and XLR; the NT1 5th Generation is a separate condenser microphone range with both connection options.

  • RØDE lists a headphone output and an external pop filter supplied with the PodMic USB. For the NT1 5th Generation, RØDE lists a shock mount and pop filter.
  • Condenser microphones also pick up the sound of the booth. RØDE’s claims about exceptional sound quality are not an independent comparison.

Audio-Technica

The AT2020 is a cardioid XLR condenser microphone, which the manufacturer recommends for applications including voice-overs and studio recording.

  • The XLR version offers a directional recording pattern for recording individual voices.
  • The AT2020 XLR requires a suitable power source and a separately available XLR cable. Don’t confuse this model with a USB version from the same range.

sE Electronics

The V7 is a dynamic supercardioid microphone, which the manufacturer also recommends for speech, broadcasting and podcasting.

  • According to sE Electronics, the V7 has an internal windscreen and shock isolation.
  • The supercardioid pickup direction calls for careful positioning of the performer and other sound sources. The manufacturer’s description is not an independent comparison with other models.

Sennheiser

The e 835 is a wired dynamic cardioid vocal microphone with an XLR connection.

  • Sennheiser describes the vocal sound as consistent when the microphone is moved slightly off-axis; this is a manufacturer claim specific to the product.
  • Consider whether a handheld microphone and XLR setup will suit the performers’ movements and your recording equipment.

Joybuy products for voice recording

This selection includes wireless microphone kits, clip-on microphones and a compact USB microphone. Check that the connection and polar pattern suit the performers, the space and the way you want to record.

DJI Mic Mini 2S with 2 TX, 1 RX and Charging Case

DJI Mic Mini 2S (2 TX + 1 RX + Charging Case)

The kit includes 2 TX and 1 RX for a two-speaker recording setup.

The product description lists internal recording and compatibility with cameras, smartphones and PCs.

View on Joybuy
Moman MA6 clip-on lavalier microphone with 6 m cable

Moman MA6 Lavalier Microphone, 6m

A clip-on microphone for anyone who wants to attach a microphone to their clothing.

The product title lists a 6 m cable, a 3.5 mm connection, an omnidirectional pattern and compatibility with smartphones. This pattern picks up sound from several directions and does not give one speaker priority.

View on Joybuy
DJI Mic 3 with 2 TX, 1 RX and Charging Case

DJI Mic 3 (2 TX + 1 RX + Charging Case)

The kit includes 2 TX and 1 RX; the product description mentions recording two people.

The product description lists compatibility with computers.

View on Joybuy
Razer Seiren V3 Mini Quartz compact USB microphone

Razer Seiren V3 Mini Quartz

A compact USB microphone for recording individual voices on a computer.

The product information lists a supercardioid pattern and tap-to-mute; the description says it is compatible with PC and Mac.

View on Joybuy
Verbex K9-Black wireless lavalier microphone with Type-C connection

Verbex K9-Black Wireless Lavalier Microphone

A wireless lavalier microphone for clip-on voice recording.

The product title lists a Type-C interface and uses including recording and interviews.

View on Joybuy

Frequently asked questions

Will one microphone work for all the actors if they perform at the same time?

It can, if a joint recording is all you need. An omnidirectional pattern can capture performers around the microphone, but it will not automatically provide separate voice tracks or favour one performer. Test the balance in advance and choose separate recording channels if you need to edit each voice individually.

What do I need to connect an XLR condenser microphone?

Check the exact model and the connections on your interface or mixer. Audio-Technica specifies 48 V phantom power and a separately available XLR cable for the AT2020 XLR; don’t treat a USB version as the same model.

How can I maintain a usable recording position in a small booth?

Point the microphone towards the speaker and away from unwanted sound sources, and listen to test recordings made from different positions. If performers move around, check that the sound and volume remain usable; positioning will depend on the conditions in the booth.

Can I use a wireless microphone in the Netherlands without a licence?

It depends on the frequency and the conditions of use. The Dutch Authority for Digital Infrastructure says that a licence is usually not required, but you must use the correct frequency band; some bands do require a licence. So check the frequency of the specific model and the conditions that apply to it.

Can I record or publish identifiable voices without permission?

If a recording contains personal data and the GDPR applies, you need a valid legal basis for processing it. According to the Dutch Data Protection Authority, consent is one possible legal basis, but it is not automatically the only one; the right approach depends on the production and intended use. Agree with the performers how their voices will be recorded and used: buying a microphone does not in itself give you the right to publish recordings.