If your main aim is to practise easing onto the throttle after a virtual corner, look at the adjustability of the throttle resistance, pedal travel or input curve. Also check that the pedals work with your PC or existing wheel and console, and can be mounted securely. A headset on its own doesn’t call for a special pedal.
Who are these pedals for?
Drivers practising corner exits
If you want to ease onto the throttle after a virtual corner, look at the throttle pedal’s resistance, travel and adjustable input. MOZA Racing lists two throttle springs and continuously adjustable resistance for CRP2; Heusinkveld lists adjustable pedal travel and output curves for Sprint.
Drivers with an existing wheel
Before choosing, check that the pedals work with your exact wheel, PC or console. Thrustmaster provides specific connection instructions for using T-LCM with PC and console.
Drivers who also practise braking points
If you want to practise a consistent braking feel as well as throttle control, check whether the set has a load cell brake and how it can be adjusted. Thrustmaster lists six springs and calibration software for T-LCM.
What should you look for when choosing?
Adjustable pedals for a permanent PC setup
A good fit if: you want to adjust the throttle resistance or input repeatedly and have a sturdy mounting point.
Bear in mind: adjustments take time; the manufacturer specifies a very rigid base for Heusinkveld Sprint.
A complete set for your existing wheel
A good fit if: you want to practise both throttle and braking, and connect the set to your current PC or wheel setup.
Bear in mind: compatibility depends on the connection and platform; features for desk use don’t prove that every floor will be stable enough.
Start with pedals you can upgrade later
A good fit if: you already have compatible Thrustmaster or CSL pedals, or want a two-pedal set that can be upgraded later.
Bear in mind: Raceline Pedals LTE doesn’t include a load cell brake; the Fanatec CSL Pedals Load Cell Kit is an upgrade for existing CSL Pedals, not a complete set.
| What to consider |
What to look for |
Who is this important for? |
| Throttle control |
Compare the adjustable throttle resistance, pedal travel and any input curves for each model. |
If you want to build up the throttle gradually after a virtual corner, you’ll want to be able to adjust the input; around 29% of consumers prioritise progressive throttle input. |
| Connection |
Check the exact wheel model, the cable required and support for PC or console. |
If you have an existing wheel, you’ll want to make sure the pedals work with your platform; around 23% of consumers prioritise connection to a wheel, PC or console. |
| Braking feel |
Check whether the set has a load cell brake and what adjustment or calibration is available. |
If you want to practise braking points and the transition to throttle, you’ll want a consistent braking feel; around 18% of consumers give braking control top priority. |
| Mounting |
Compare the mounting points and the manual’s requirements with your floor, pedal plate or rig. |
If your pedals need to stay firmly in place, you’ll want to know whether your setup is suitable; around 18% of consumers prioritise stable mounting. |
| Complete set or upgrade |
Check what’s included and which pedals, wheel base or mounting parts you already have. |
If you want to upgrade step by step, you’ll want to know in advance which parts your setup needs; around 12% of consumers prioritise a complete set. |
Common buying mistakes
-
Confusing sensor capacity with the force you need to apply
Heusinkveld lists a load cell sensor capacity of 120 kg and a maximum actual braking force of 65 kg for Sprint. These figures describe different things.
Compare sensor capacity and actual braking force separately, then decide which braking feel suits your rig.
-
Mistaking an upgrade kit for a complete pedal set
The Fanatec CSL Pedals Load Cell Kit is designed for existing CSL Pedals. The load cell brake for Raceline Pedals LTE is sold separately.
Check what’s in the box and compare it with the pedals and other parts you already own.
A complete setup may require compatible pedals or a separate upgrade.
-
Assuming pedals will automatically work with a console
For T-LCM, Thrustmaster specifies a particular console connection via a compatible Thrustmaster wheel base.
Check the combination of pedal model, wheel base and console before ordering.
-
Using a stiff brake pedal loose on the floor
Heusinkveld specifies that Sprint must be mounted on a very rigid base.
Compare the mounting requirements for the exact model with the space and mounting points in your setup.
You may need a suitable pedal plate or rigid rig.
Brands to consider
MOZA Racing
CRP2 is worth considering if you’re looking for a mechanically adjustable throttle pedal.
- MOZA Racing lists two throttle springs and continuously adjustable resistance for CRP2.
- Check that the model works with your intended PC or console setup; adjustability alone doesn’t prove you’ll get better corner exits.
Logitech G
RS Pedals is an option for comparing a load cell brake and Hall-effect throttle pedal in one set.
- Logitech lists interchangeable brake dampers and spacers, plus brackets with rubber grips for desk setups.
- Check compatibility with your wheel and whether your floor or desk setup is stable enough.
Thrustmaster
T-LCM is a complete load cell option; Raceline Pedals LTE is a two-pedal option that can be upgraded with a suitable add-on.
- Thrustmaster lists adjustable springs and magnetic sensors for T-LCM.
- Raceline Pedals LTE doesn’t include a load cell brake and isn’t compatible with the T500. For console use with T-LCM, Thrustmaster specifies that a suitable Thrustmaster wheel base is required.
Heusinkveld
The Sprint 2-pedal set is a PC option for anyone looking for adjustability and with a rigid rig.
- Heusinkveld lists adjustable pedal travel and output curves.
- The manufacturer specifies mounting on a very rigid base. The stated sensor capacity of 120 kg is different from the maximum actual braking force of 65 kg.
Fanatec
The CSL Pedals Load Cell Kit is designed as an upgrade for anyone who already has CSL Pedals.
- Fanatec says the kit replaces the existing brake pedal, which can then be used as a clutch.
- The kit isn’t a complete pedal set; for console use, Fanatec specifies that a compatible Fanatec wheel base or compatible racing wheel is required.
Racing wheel and pedal sets at Joybuy
These Joybuy products are racing wheel sets with pedals included; they’re relevant if you’re looking for a wheel as well as pedal input.
Image unavailable
Hori Racing Wheel Apex for PC/PS4/PS5
A racing wheel with pedals included, for anyone looking for throttle and brake input in one set.
The product name lists use with PC, PS4 and PS5.
Joybuy
Image unavailable
Logitech G G923 Black
This wheel and pedal set is worth considering if you want to practise throttle and braking together.
The product description lists a progressive brake pedal and adjustable pedal sensitivity via G HUB on PC. The product name mentions PC, Xbox One and Xbox Series S/X.
Joybuy
Image unavailable
Trust GXT 289 Movi-Racing Wheel
This set is worth considering if you want to practise separate throttle and brake input on PC.
The product name lists pedals, PC use, vibration feedback and a 270-degree turning range.
Joybuy
Image unavailable
Thrustmaster T98-X Ferrari 296 GTB
A wheel and pedal set for anyone looking for both controls together.
The product description lists compatibility with Xbox Series, Xbox One and PC.
Joybuy
Image unavailable
Thrustmaster T598-P Direct Axial Drive Force Feedback Racing Wheel
The product description lists pedals with adjustable firmness included, which is useful if you want to adjust pedal resistance.
According to the description, the set includes two Raceline Pedals LTE sensor pedals. The product name lists PS5, PS4 and PC.
Joybuy
Frequently asked questions
Do I need special pedals if I use a headset while driving?
No, a headset doesn’t require a special pedal function. Choose based on throttle input, connection and mounting, and adjust the sound separately in your game and system.
How do I set up new pedals before practising corner exits?
Check that the game recognises the pedals and calibrate the axes. iRacing recommends calibration when a new controller is connected; the game settings don’t automatically apply to other racing games.
Can I connect T-LCM via USB and RJ12 at the same time?
No, Thrustmaster recommends using one cable at a time: USB on PC, or RJ12 via the wheel base. For console use, the manufacturer specifies an RJ12 connection to a Thrustmaster wheel base.
How do I maintain an adjustable pedal set?
Follow the manual for your exact model when making mechanical adjustments. After moving the pedals, also check that they’re firmly secured and correctly calibrated again; Heusinkveld specifies mounting Sprint on a very rigid base.
What are my rights when buying online in the Netherlands?
For distance purchases from a business, you’ll generally have a 14-day cooling-off period, with some exceptions under Dutch government rules. You’re also entitled to a product that meets reasonable standards; the Netherlands has no fixed statutory guarantee period, and the seller is your point of contact if something is faulty.