Who are these pedals for?

Practising pit entries

You want to brake in a controlled way before the speed line each time, while keeping an eye on your speed on a single screen. iRacing Support explains that the pit limiter doesn’t brake for you; iRacing also covers the controls and speed information in the simulator.

Driving at a desk or on a wheel stand

You’re practising without a permanent cockpit and want the pedals to stay in place when you brake. Mounting options vary between sets; Fanatec and Heusinkveld each describe the setup requirements for their products.

Adjusting your setup in a fixed rig

You have a fixed cockpit and want to tailor brake resistance, pedal position or brake output to your driving style. Fanatec and Heusinkveld describe adjustment options for their specific pedal sets.

What should you look for when choosing?

Position-based two-pedal set

Suitable if: you’re starting without a fixed rig and want to use the throttle and brake first.

Bear in mind: the standard Fanatec CSL Pedals don’t have a load cell brake; additional hardware is needed for standalone USB use.

Adjustable load cell set

Suitable if: you want to adjust brake pressure and can position or mount the set securely.

Bear in mind: the Thrustmaster T-LCM has three pedals and comes with brake springs; the MOZA SR-P model reviewed here has two pedals and no clutch.

Load cell set for a fixed cockpit

Suitable if: you already have a sturdy rig and want more scope to adjust brake resistance or pedal position.

Bear in mind: the Heusinkveld Sprint is designed to be mounted on a full-frame rig; also check the requirements for your platform.

This table is for consumers choosing pedals to practise virtual pit entries on a single screen. iRacing is the example used here; check the features and display in the simulator you use, too.

What to consider What should you check? Who should pay particular attention?
Brake control Compare the adjustable brake feel with the amount of pressure you can comfortably apply from your seating position. If I want to brake at the same point before the pit lane each time, I’m looking for a brake I can apply consistently. Around 33% of consumers prioritise brake control for this kind of practice.
Stable setup Check the mounting points, the support behind the pedals and whether your seat stays in place. If I’m practising without a fixed cockpit, I don’t want the pedals to move when I brake. Around 27% of consumers make stability their top priority when choosing.
Connection Check compatibility with your platform and wheel model; don’t assume a USB connection means it will work with a console. If I want to keep using my existing wheel or platform, the connection needs to work with that combination. Around 20% of consumers prioritise compatibility.
Speed and limiter Check that your speed stays visible and that you can operate the limiter if the car has one. If I want to go from braking to driving in the pit lane on a single screen, I need to be able to keep track of my speed. Around 20% of consumers prioritise those controls and information.

Common mistakes

  • Expecting the pit limiter to slow you down in time

    In iRacing, the pit limiter restricts your speed, but it won’t brake the car down to the required pit speed. You’re still responsible for braking at the right point.

    Practise braking and check the displayed speed before relying on the limiter.

  • Choosing a stiff load cell brake without suitable mounting

    A pedal set that moves or a plate that flexes can make the controls feel different from one attempt to the next. Heusinkveld specifies that the Sprint must be mounted on a full-frame rig.

    Before buying, check how the pedals and seat are secured, and whether your setup is suitable.

    Depending on the set, you may need a suitable rig, mounting hardware or a model-specific base plate.

  • Confusing the standard CSL Pedals with a load cell model

    The standard Fanatec CSL Pedals use a position sensor for the brake; the Load Cell Kit is sold separately.

    Compare the full set name, what’s included and the connection for the model you’re planning to buy.

    The Load Cell Kit or a separate adapter for standalone USB use with the standard set is additional hardware.

  • Taking a kilogram figure as proof of faster braking

    Sensor capacity and the actual maximum force you can apply with your foot are different specifications. The stated figures aren’t directly comparable measures of time saved when entering the pit lane.

    Compare the adjustment options, force required and mounting for your setup rather than just looking at the highest figure.

Brands to compare

Fanatec

The CSL Pedals and CSL Elite Pedals V2 use different brake sensors and connections, so check the exact set name.

  • Fanatec describes the standard CSL Pedals as position-based and says the set can be braced against a solid surface.
  • With the standard set, a load cell upgrade and standalone USB use depend on separately available hardware. The CSL Elite Pedals V2 have a load cell brake and come with a USB cable for PC.

Thrustmaster

The T-LCM is a three-pedal set with a load cell brake and springs included to adjust the brake feel.

  • Thrustmaster describes independently adjustable pedal positions and calibration software for PC.
  • The stated platform support doesn’t prove that the set will work on its own with every console or wheel; check the connection instructions for your combination.

MOZA Racing

The SR-P model reviewed here includes a throttle and a load cell brake, but no clutch, and has a USB connection.

  • According to MOZA, pedal spacing, pedal plate height and brake behaviour can all be adjusted.
  • The stated 100 kg sensor capacity isn’t a measured advantage for pit entries. Make sure you choose the model without a clutch.

Heusinkveld

The Sprint two-pedal set is designed for PC users with a sturdy full-frame rig who want more options for adjusting brake force and pedal output.

  • Heusinkveld specifies a maximum actual braking force of 65 kg at the pedal and a 120 kg load cell sensor; these are different measurements.
  • The manufacturer specifies mounting on a full-frame rig and doesn’t describe the Sprint as a free-standing floor set.

Joybuy product picks

These Joybuy picks are wheel and pedal bundles for practising with the throttle and brake. Before buying, check that the listed platform and mounting options suit your setup.

Logitech G G923 Black USB 2.0 wheel with pedals for PC and Xbox

Logitech G G923 Black USB 2.0 wheel with pedals, PC and Xbox

A wheel and pedal bundle for anyone who wants to use the throttle and brake separately while practising.

The product description mentions a progressive brake spring and settings via G HUB on PC. The product name lists PC, Xbox One, Xbox Series S and Xbox Series X.

Joybuy
Trust GXT 289 Movi-Racing Wheel with pedals, vibration feedback, 270 degrees, for PC, black

Trust GXT 289 Movi-Racing Wheel with pedals, vibration feedback, 270 degrees, PC, black

A wheel and pedal bundle for anyone practising at a desk or table who wants to use the throttle and brake separately.

The description mentions the included throttle and brake pedals, clamps for mounting to a desk or table and a USB connection for PC. The product name lists a 270-degree turning range and vibration feedback.

Joybuy

Frequently asked questions

Does a pit limiter slow the car down before I enter the pit lane?

No, not in iRacing. You have to brake to the pit speed limit yourself; whether automatic assistance is available also depends on the session rules.

What should I keep visible and within reach on a single screen?

In iRacing, an on-screen element shows the speed limit and your current speed as you approach the pit lane. You can assign a control for the pit limiter if the car has one; some cars don’t have a pit limiter. Check this in the simulator you’re practising in.

How should I adjust the pedals after mounting them?

First, check that the pedals and seat don’t move. Then, where the model allows it, adjust the brake resistance and pedal output, and test in the simulator that the throttle and brake reach their intended range. For the T-LCM, Thrustmaster recommends using its calibration software; Fanatec also mentions manual calibration for the CSL Elite Pedals V2.

What can I do if pedals I bought online don’t match the description?

For a purchase made by a consumer in the Netherlands, the seller must provide a product that meets requirements and offer a solution if it’s faulty. The Dutch Government states that online purchases from a business are also covered by a 14-day cooling-off period in many cases; this is separate from your statutory guarantee. According to the Dutch Government, there is no fixed statutory guarantee period for products in the Netherlands.