Practising braking points
You repeatedly drive the same street circuit and want to adjust the brake to the pressure you prefer. Look at the brake signal and adjustment options, not just the maximum sensor rating.
If you mainly want to practise braking points repeatedly, compare an adjustable load cell brake; a position-sensing two-pedal set could be a simpler place to start. Before choosing, check that it connects to your PC, console and wheel, and that the pedals sit securely on your pedal plate. Adjustment options vary by model, and a load cell alone is no guarantee of faster lap times.
You repeatedly drive the same street circuit and want to adjust the brake to the pressure you prefer. Look at the brake signal and adjustment options, not just the maximum sensor rating.
You already have a wheel or console and want to know whether a separate pedal set will connect to it. The connection you need depends on the product and the rest of your setup.
You have a permanent place in your gaming room and want the seat, pedal plate and pedals to line up properly when braking. Check the mounting points and adjustment range of the set.
When practising braking points, it matters whether the brake measures pedal position or force. Also check that you can connect the set and mount it securely in your existing gaming room setup.
Choose this if: you want to start with an accelerator and brake, or already have a compatible Fanatec wheel base.
Trade-off: the standard CSL Pedals measure pedal position; a load cell brake and clutch are separate upgrades.
Choose this if: repeating your braking pressure is your main goal and you can mount and connect the set to suit your setup.
Trade-off: check the connection, mounting and preferred pedal resistance for each model; a load cell alone does not prove improved performance.
Choose this if: you have a fixed cockpit and want to adjust the pedal position, angle or travel.
Trade-off: if you have a cockpit from another brand, check the mounting points and available space; additional accessories may be sold separately.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Consistent braking | Check whether the version on offer genuinely has a load cell brake, what adjustments are included and whether you can operate the brake steadily. | If I want to practise the same braking points, I want a brake signal and resistance I can adjust. Around 28% of consumers prioritise consistent braking. |
| Connection to your wheel and platform | Make a note of your PC or console and the exact wheel base; then check which cable or adapter is needed for that combination. | With my existing wheel and gaming platform, I want to know in advance whether the pedal set will work with them. Around 22% of consumers prioritise a compatible connection. |
| Secure pedal position | Compare the pedal plate’s mounting points and available space with the exact set. | If my seat and pedal plate are fixed in the gaming room, I want the pedals to suit my seating position. Around 22% of consumers prioritise secure mounting. |
| Brake feel and adjustment | Compare the springs, elastomers and position settings included with the model, and check whether recalibration is needed after making a change. | I want to be able to adjust the pedal feel or spacing to suit my setup. Around 17% of consumers care most about adjustment options. |
| What’s included and upgrades | Check whether the version includes two or three pedals, and whether a load cell, adapter or mounting accessory is sold separately. | Before choosing, I want to know which parts I get straight away and what I might need later. Around 11% of consumers focus mainly on what’s included and upgrades. |
The standard Fanatec CSL Pedals measure pedal position. The load cell kit changes the brake and electronics, so the set name alone doesn’t tell you which version you’re buying.
Compare the full product name and box contents before ordering.
If you want to add a load cell brake later, you’ll need a separate kit.
Fanatec describes different connection options for the standard CSL set: through a compatible wheel base, or independently via USB with a suitable solution.
Check the exact combination of wheel, pedals and platform before ordering.
Independent USB use may require a separate adapter; the load cell kit offers a different USB connection option.
For the Sim-Lab XP1, Sim-Lab specifies a 200 kg load cell and a maximum brake pedal pressure of 100 kg. These are different specifications.
Compare sensor capacity, brake pedal pressure and adjustable resistance only when it’s clear what each figure describes.
An adjustable pedal set won’t necessarily fit the mounting points or available space in every cockpit.
Compare the holes, available pedal space and seating position with the exact set before choosing.
Some setups require mounting or positioning accessories, which are sold separately.
The T-LCM is a three-pedal set with a load cell brake, designed for those who want to adjust the brake using interchangeable springs.
The standard CSL Pedals are a two-pedal base for a compatible Fanatec setup, with upgrades available separately.
According to Logitech, the PRO Racing Pedals feature adjustable brake components and movable pedal modules.
The XP1 is a load cell set for a fixed cockpit, with adjustment options for the brake and pedal position.
The CRP2 is a modular two-pedal set for those considering different brake settings or inverted mounting.
This Joybuy selection is a PC racing wheel set with separate accelerator and brake pedals. Consider it as a complete wheel set, not as a separate pedal set with an adjustable load cell brake.
No image available
A complete wheel set with separate accelerator and brake pedals for PC racing games; the set can be secured to a desk or table with clamps.
The product name specifies a steering rotation range of 270° and PC use. According to the product description, the wheel has vibration feedback, not motorised force feedback, and isn’t intended for sim racers who need a 900° range.
Yes. The Thrustmaster manual says to recalibrate when you change the brake pedal resistance. To do this, connect the set to a PC via USB, following the instructions in the manual.
Not with just the standard set, as described by Fanatec. For independent USB use, Fanatec specifies the separate ClubSport USB Adapter or the CSL Pedals Load Cell Kit; when using a compatible Fanatec wheel base, connect the pedals with the included RJ12 cable.
Compare the mounting points and available space with the exact pedal set. Sim-Lab specifically recommends this check when fitting the XP1 to cockpits from other brands.
According to ACM ConsuWijzer, online purchases generally come with a statutory cooling-off period of up to 14 days after delivery, with some exceptions. If a product is faulty, the seller is responsible for providing an appropriate solution at no cost. A manufacturer’s guarantee does not replace these statutory rights.
Not simply because it’s a set of racing pedals. The Dutch government says CE marking is required for product groups covered by the relevant European rules; a product must not carry the marking if those rules don’t apply to it.