Close-miking a puppet’s voice
You can position the microphone close to where you speak and want clear recordings without distracting plosive sounds or echo.
Start by thinking about where the microphone can sit while you perform. Choose built-in microphones if you can place the recorder securely close to your mouth, or a suitable input for a separate microphone if the recorder would get in the way. RØDE describes a pop shield as a way to reduce plosive sounds. Shure points out that microphone placement alone won’t eliminate echo, so listen back to a test recording using your loudest character voice.
You can position the microphone close to where you speak and want clear recordings without distracting plosive sounds or echo.
You want to place the microphone somewhere separate from the recorder, so the connections and a secure microphone setup will affect your choice.
You want to record and listen back without a complex setup, so you’ll want to consider built-in microphones, storage and power.
Choose this option if: you can place the recorder securely close to where you speak and want to record without a separate microphone.
Bear in mind: you’ll need to move the whole recorder to change the microphone position. Check that your setup leaves enough room for the puppet and your hands.
Choose this option if: the recorder would get in the way near your mouth, or you want to place the microphone in a fixed position while keeping the recorder elsewhere.
Bear in mind: you may also need a compatible microphone, cable and mounting option. Check that the connection and any power requirements suit your microphone.
| What to consider | What should you look for? | Who should pay particular attention? |
|---|---|---|
| Recording close up without plosive sounds or echo | Check there’s room for a secure mount and pop shield. Listen to a test recording for plosive sounds and echo. RØDE describes using a pop shield, while Shure discusses the effect of reflections in a room. | If I speak close to the microphone, I want my voice to stay clear without distracting plosive sounds or room echo. Around 36% of consumers say microphone placement and sound at close range are their top priority. |
| Being able to position a separate microphone | Check that the input matches the microphone’s plug and any power requirements. Remember to factor in the cable and mounting option too. | If the recorder gets in the way of my hands or the puppet, I want to be able to position the microphone separately. Around 29% of consumers prioritise the flexibility of a separate microphone. |
| Recording and listening back independently, without delay | Check how to record and listen back to a take, and find out what storage media and power your setup requires. | If I want to record and check a take in different locations, I want a setup with few separate components. Around 21% of consumers prioritise being able to record and listen back independently. |
| Varying vocal volume | Check which recording modes and monitoring features the model offers. Test both your quietest and loudest voice; a recording feature won’t automatically fix plosive sounds or echo. | If my character voice ranges from quiet to loud, I want to be able to check the loudest passage. Around 14% of consumers say widely varying vocal volume is their main concern. |
A recording format won’t automatically solve problems with microphone placement, plosive sounds or echo. Test your loudest character voice and listen back to the recording before recording a whole scene.
If the recording doesn’t sound usable, you may need to record the take again.
With built-in microphones, the recorder itself needs to be in the right place. A separate microphone gives you more flexibility, but requires a suitable input and its own setup. First, work out where your mouth, the puppet and your hands will be while you perform.
A separate microphone may also need a compatible cable and mounting option.
Philips lists a 3.5 mm microphone input and PCM recording up to 48 kHz/16 bit for the DVT4110. The higher PCM setting in the technical specifications applies to other variants. Always check the full model number against the specifications.
The H1essential has built-in X/Y microphones and a 3.5 mm input. The H4essential adds two XLR/TRS inputs for separate microphones.
The DR-05XP is a standalone recorder with built-in omnidirectional stereo microphones and a stereo mini-jack for a compatible external source.
The LS-P5 is a standalone PCM recorder with internal memory and adjustable direction settings for its built-in microphones.
The DVT4110 family includes recorders with built-in microphones, internal memory and a 3.5 mm input.
Here you’ll find Joybuy products for spoken recordings, including a wireless microphone kit and voice recorders. Check that a separate microphone, its connection and playback options suit your own setup and the way you operate the puppet.
No image available
Could be worth considering if you want to attach a microphone close to your voice. Check that the connections and recording chain work with your recorder.
The product description mentions clip and magnetic mounting, as well as internal recording via the transmitter. According to the description, the transmitter weighs around 12 g and supports internal 32-bit float recording.
No image available
Could suit you if you want transcription and summaries as well as spoken recordings.
The product description mentions audio recording, transcription and summaries.
No image available
Could be useful if storage and transcription are also important for your spoken recordings.
The product description mentions six microphones, 64 GB of storage and transcription.
No image available
Could be useful if you also want spoken recordings transcribed and summarised.
The title and product description mention transcription and summaries in 118 languages.
No image available
Could suit you if you want to record and listen back to spoken takes and need plenty of storage.
The product description mentions MP3 and WAV recording, USB-C and 128 GB of storage.
First, position the microphone securely near where you speak, clear of the puppet’s path of movement. Listen back to a test recording and adjust the distance or angle if you hear plosive sounds, mouth noises or echo.
No. The Zoom H1essential and Tascam DR-05XP have a 3.5 mm input, while the Zoom H4essential has two XLR/TRS inputs. Check the plug and any power requirements for your exact microphone, as these connections aren’t necessarily interchangeable.
Check whether you need a suitable stand or other mounting option, a pop shield, cable, storage and power. Also check that you can listen back to the recording on your chosen recorder.
It depends on how you plan to use it. According to the Dutch Data Protection Authority, publishing personal data online usually requires consent. Consider public or professional publication separately, and don’t assume you have consent just because someone took part in the recording.