If you need to consider ambient light
You can’t completely darken the small seating area during the film, and want everyone there to be able to see the picture.
Start by considering the ambient light and the distance between the projector and the screen. A bright Full HD model is an obvious choice if you can’t darken the seating area sufficiently; a compact projector is better suited to controllable lighting and a setup you want to move around. Also check that you can connect your film source and that the sound will reach everyone in the seating area.
You can’t completely darken the small seating area during the film, and want everyone there to be able to see the picture.
You need to arrange the screen, projector and seats in a compact space, and want to match your preferred picture size to the projection distance in advance.
You can control the light during the screening, but want to be able to set up the projector in different viewing spots.
Start by considering the light in your seating area, then decide where the projector can go, and finally check how you’ll play the film and handle the sound.
| What to consider | What to look for | Who is it important for? |
|---|---|---|
| Visibility in ambient light | Compare the stated light output and consider whether you can darken the room. Epson Netherlands recommends 2.500–3.500 lumens as a guideline for a living room with some ambient light; visibility also depends on the conditions and picture size. | If I can’t darken the room properly, I want everyone to be able to see the film. Around 31% of consumers prioritise visibility in ambient light. |
| Suitable picture size and positioning | Measure the distance from the lens to the screen and the picture width you want. Check that the throw ratio of the exact model is suitable, and that seats and walkways remain clear. | In a small seating area, I want to get the picture size right without blocking seats or walkways. Around 31% of consumers prioritise positioning that suits the available space. |
| Playing the film and sound | Check that the connection on your laptop or player matches an input on the projector. Also consider whether the sound will reach the seating area or if you’ll need an external speaker. | If I’m showing my own coastal walk film with sound, I want to know in advance that my source can connect and the sound will reach the group. Around 23% of consumers prioritise playback and sound. |
| Moving the projector and power supply | Check whether mains power is available at each viewing spot. If you plan to rely on the battery, check that the stated battery life suits your film and settings. | If I want to use the projector in different places, how easy it is to move and power is a factor. Around 15% of consumers prioritise portability. |
A higher resolution doesn’t make a picture brighter. LG lists the compact CineBeam Q HU710PB at 500 ANSI lumens, so consider the amount of light in the room too.
First decide whether you can darken the room, then compare resolution and size.
The projection distance you need varies by model. A projector that doesn’t fit in the available space could get in the way of seats or walkways.
Measure the distance to the screen and the picture width you want before choosing a model.
You may need a different setup if the projector won’t fit in the available space.
Auteursrecht.nl distinguishes between screenings within a strictly domestic circle and those outside it. Different rights may be required to show a copyrighted film outside that circle.
Before the screening, check which rights apply to both the film and any music.
Outside a strictly domestic circle, permission or a screening licence may be required; the conditions depend on the rights and the screening.
A Full HD option for a fixed setup; check the projection distance and suitability for your room in advance.
The models listed offer different options for fixed or portable setups; choose based on the light and the space available.
The CineBeam Q HU710PB is a compact option if 4K playback matters and you can control the light in the room.
The models below are projectors for watching films. Compare the stated light output and connectivity, and check that the projector will fit in your preferred spot in the seating area.
No image available
Its portable design and built-in battery make it a good fit for a setup you want to move around.
No image available
The product title mentions a flexible stand, which could be useful if you don’t plan to keep the projector in one fixed spot.
No image available
Check the listed picture specifications and compare them with your preferred picture size and the projection distance available.
No image available
The gimbal design and portable build are well suited to a setup where you want to change the projection angle.
No image available
The product title mentions a rotating body; check that this allows the projector to fit where you want it in your setup.
Measure the available distance from the lens to the screen and the picture width you want, then compare these with the throw ratio of the exact model. BenQ lists the TH575i with a throw ratio of 1,49–1,64 and the GV50 with a ratio of 1,2. Make sure you also allow for seats and walkways in your final setup.
Yes, if the laptop’s video output matches an input on the projector. Epson lists HDMI for the CO-FH01, and BenQ does so for the TH575i and GV50. Test the film file, sound and any adapters in advance too.
This depends, among other things, on the screening circumstances and the rights to the film and any music. According to Auteursrecht.nl, screenings within a strictly domestic circle fall under this category; permission from the rights holders is needed for copyrighted films shown outside that circle. Check which rights apply to your screening.
Yes, the lamp in a lamp-based model may need replacing over time. Check the information for the exact model and factor this maintenance into your choice.