Who is this choice relevant to?

Viewer in a bright room

You want to watch music films without completely darkening the living room. Consider how much light falls on the screen wall, the image size and the screen, alongside the projector’s stated lumen rating.

Film soundtrack enthusiast

You want to play vocals and music through a soundbar or receiver. Check that the projector, source device, cable and sound system all support the same audio connection.

Viewer with limited space

You have little room at the back of the room for a projector. Compare the throw ratio of a standard-throw model with an ultra-short-throw setup, and check which screen is suitable.

What should you look for?

When watching music films in a bright living room, the main considerations are connected: think about the light on the screen wall, projector placement, audio connections and what the complete setup requires in practice.

Consideration What should you check? Who is this important for?
Picture in daylight Compare the stated lumen rating and measurement basis with the light falling on the screen wall, your intended image size and the screen. If possible, assess the picture in similar lighting conditions. If daylight falls on my screen wall, I want to know whether scenes will remain visible without losing sight of contrast. Around 33% of consumers prioritise visibility in daylight.
Sound and connections Check the projector’s audio outputs and the connections on your source device and soundbar or receiver. When I watch music films, I want to connect my source device to the sound system without having to guess whether the connection will work. Around 27% of consumers prioritise a connection for soundtrack playback.
Placement and screen Measure the available space and the desired image width. For an ultra-short-throw projector, check that the screen is suitable for the direction of projection. If the projector needs to sit close to the wall, I want to know in advance whether the setup and screen will work there. Around 20% of consumers prioritise placement and screen compatibility.
Setup and maintenance Check whether you’ll need a suitable screen or separate audio equipment, and compare the stated light-source life for each operating mode. If I want to understand the complete setup and what’s involved in using it, I need to know which components and maintenance it requires. Around 20% of consumers prioritise the complete setup and maintenance.

Things to consider before buying

  • Focusing only on the lumen rating

    The stated light output alone doesn’t tell you how much contrast a film picture will retain when daylight falls on the screen.

    Consider the measurement basis, intended image size, light levels and screen as parts of the same setup.

  • Using any ALR screen with a UST projector

    An ultra-short-throw projector shines onto the screen from a different direction to a projector positioned at the back of the room. That means not every screen will suit this setup.

    Check that the screen is designed for the projection direction of your chosen projector and suits the room’s light sources and viewing positions.

  • Assuming built-in speakers or eARC provide a complete audio solution

    The Epson EH-TW840 lists a built-in 2 W mono speaker; the BenQ TK710 lists eARC. Neither specification alone tells you how your complete sound setup will sound with your films.

    Check the connections on the projector, source device and sound system together. If possible, listen to some film content before settling on your setup.

Brands to consider

BenQ

The TK710 is an example of a standard-throw projector with a laser light source and 4K UHD specification.

  • BenQ lists 3,200 ANSI lumens and eARC for the TK710.
  • Its 1,15–1,5:1 throw ratio requires suitable placement. These specifications don’t measure contrast in your living room.

Epson

The EH-TW840 and EH-LS800 illustrate two different setups: standard throw and ultra-short throw.

  • Epson lists 4,000 lumens for both white and colour light for the EH-TW840. For the EH-LS800B, Epson lists ultra-short throw and 4,000 lumens.
  • According to Epson, the EH-TW840 has a built-in 2 W mono speaker. For a UST setup, check that the screen is suitable for projection from below.

Optoma

According to the Dutch product specifications, the UHZ66 is a standard-throw laser projector with 4K UHD.

  • Optoma lists 4,000 lumens, HDMI eARC, a built-in 15 W speaker and a stated laser life of 30,000 hours.
  • The product specifications don’t measure film brightness in your living room. Check the throw ratio and screen for your intended setup.

Projectors at Joybuy

These projectors are options to compare for watching films in your living room. Check the required throw distance, screen and audio connection for your setup for each model.

Optoma UZ38X 4K UHD dual-laser projector

Optoma UZ38X 4K UHD dual-laser projector

A standard-throw model to compare with the available space and desired image size.

The listing states 3,800 lumens, 4K UHD, a 1,21:1–1,59:1 throw ratio and a built-in 15 W speaker. The projection screen and source device are not included.

View at Joybuy
JMGO N1S Ultra 4K Triple Laser UHD projector

JMGO N1S Ultra 4K Triple Laser UHD projector

The listing describes an adjustable gimbal; check that your intended projection position and image direction are suitable.

The listing states 3,000 ANSI lumens, 4K UHD and a colour gamut of 1.07 billion colours.

View at Joybuy
Optoma Photon Beam PK52 projector

Optoma Photon Beam PK52

Compare the stated throw ratio with the available space before deciding where to place it.

The listing states 4K UHD, 3,500 lumens, a 1,21:1–1,59:1 throw ratio and two built-in speakers rated at 15 W each.

View at Joybuy
BenQ TK700 standard-throw projector

BenQ TK700 standard-throw projector

The zoom can help you adjust the projection to the available distance; check the required image width and placement.

The product listing states 3,200 ANSI lumens, 4K UHD and 1.3× zoom.

View at Joybuy
Dangbei DBOX02 4K laser projector

Dangbei DBOX02 4K laser projector

The listing describes built-in streaming access and keystone correction; check that the projection position suits your setup.

The product listing states 2,450 ISO lumens, 4K and two 12 W speakers.

View at Joybuy

Frequently asked questions

Is a high lumen rating enough to watch music films during the day?

No, a high lumen rating alone doesn’t guarantee a good picture for films. BenQ Netherlands cites around 3,000 ANSI lumens as a consideration when there’s ambient light, but also points out that a higher lumen rating doesn’t automatically mean excellent picture quality. So also consider the light levels, image size and screen.

How do I connect a soundbar for film soundtracks?

Check the connections on your projector, source device and soundbar or receiver together. BenQ lists eARC for the TK710, but that connection doesn’t prove that every combination of source, cable and sound system will work automatically.

Will any ALR screen work with an ultra-short-throw projector?

No, the screen needs to suit the direction in which the projector projects the image. Check that it’s designed for that projection direction and suitable for the room’s light sources and viewing positions.

What should I check for placement and maintenance?

Measure the available distance and desired image width, then compare them with the chosen model’s specifications. For a lamp, check the stated life for each mode and don’t compare it directly with a laser rating; these specifications don’t guarantee brightness or maintenance requirements for your particular use.

What consumer rights and safety information should I know about when buying online in the Netherlands?

The Dutch government states that a 14-day cooling-off period applies to many online purchases. Check whether it applies to your specific purchase and who the seller is. The Dutch government also states that electronic devices placed on the EU market must carry a CE mark; check the marking and product information on the relevant listing.