Start by considering how much daylight you can block out and how large you want the image to be. Then compare the stated light output with the projection distance and your planned screen set-up. A higher stated brightness figure doesn’t guarantee a clearly visible film image in direct sunlight, and short-throw or UST models still need careful measuring. Before you buy, also check that the specific model meets the applicable EU requirements.
Who is this guide for?
Viewer in a bright room
You want to watch short films without completely darkening the living room. So pay attention to the light on the screen, the image size and the stated light output. Epson Netherlands, for example, lists separate white and colour light output figures for the EH-TW840.
Viewer with limited space
You want a large image without placing the projector in the middle of a walkway. Projection distance matters; with a UST set-up, the wall, furniture depth and position are also important. BenQ Netherlands covers these measurements in its information about short-throw and UST set-ups.
Viewer who wants to start watching quickly
You want to watch short films without a lot of set-up, so you check streaming access, connections, focus and sound. Epson Netherlands and BenQ Netherlands list these features for specific models, but they don’t replace assessing visibility in ambient light.
What should you look for when buying?
Start by choosing the right type for your preferred set-up: a standard projector, short-throw model and UST projector differ mainly in how much space they need.
Projector with space between it and the screen
A good fit if: you can position the projector at a suitable distance and brightness in ambient light is a priority.
Bear in mind: check the image size at your chosen distance and whether you’ll need separate equipment for sound or streaming.
Short-throw projector
A good fit if: there’s limited space between the projector and screen, but you don’t want to place the unit right against the wall.
Bear in mind: measure the available distance and check it against the model’s throw ratio and your preferred image size.
UST projector near the wall
A good fit if: a fixed set-up close to the projection wall is important.
Bear in mind: measure the depth of your furniture too, and check the wall dimensions, screen choice and alignment.
| What to consider |
What should you check? |
Who is it relevant to? |
| Image visibility in ambient light |
Check how much light falls on the wall and what light output figure the manufacturer gives. Take your planned image size into account. |
If I want to watch short films during the day, I want to know whether scenes will remain visible on my screen. Around 42% of consumers put visibility at the top of their buying priorities. |
| Positioning the projector and screen |
Measure the distance to the projection surface and the available wall width. For UST, check the depth of your furniture too. |
When my living room has little free space, I want to position the unit and image without blocking a walkway. Around 25% of consumers prioritise placement. |
| Starting and hearing films |
Check that your streaming service or external source works with the model’s connections and features. Decide whether the built-in sound is good enough for you. |
If I want to start short films easily, I look at the source connection and sound, as well as image visibility. Around 17% of consumers put ease of playback first. |
| Set-up and maintenance |
Check which components you’ll need for your set-up, and look at the model-specific information about the light source and maintenance. |
If you want to understand the complete set-up and maintenance requirements in advance, you’ll want to know which components and ongoing considerations are involved. Around 16% of consumers prioritise total costs and maintenance. |
Common buying mistakes
-
Assuming a high lumen figure guarantees film contrast in daylight
Ambient light and image size affect visibility. ANSI and ISO lumens use different measurement methods and aren’t directly comparable without further explanation; BenQ discusses the differences between these light output measurements.
Compare the measurement method and assess the light falling on your intended screen area before choosing an image size.
Depending on the room, you may need to include blackout measures or a suitable projection screen in your set-up.
-
Choosing a UST projector without measuring the whole set-up
Having a short distance to the wall doesn’t remove the need to consider wall width, furniture depth and alignment.
Measure the wall and furniture, then check those dimensions against the specific unit and screen.
You may need to rearrange your furniture or choose a suitable screen.
-
Confusing the manufacturer’s warranty with your full statutory rights
Any manufacturer’s warranty is separate from your statutory rights against the retailer. ACM ConsuWijzer explains that statutory rights exist alongside a retailer’s or manufacturer’s warranty.
Keep your proof of purchase and, if something goes wrong, contact the retailer about your applicable statutory rights.
Brands to consider
Epson
The models mentioned range from a conventional Full HD projector to a UST projector, so the set-up is an important point of comparison.
- Epson Netherlands lists 4,000 lumens of white and colour light output for both the EH-TW840 and EH-LS800B. For the EH-TW840, Epson also lists two HDMI ports and a 2 W mono speaker.
- These are manufacturer figures for these models, not an independent assessment of film image quality in your living room.
BenQ
The TK705STi is a short-throw option to consider if there’s limited space between the projector and screen.
- BenQ lists a 0.8:1 throw ratio, 3,000 ANSI lumens and Google TV for the TK705STi.
- These manufacturer figures don’t tell you how visible dark film scenes will be in a particular bright living room.
XGIMI
The HORIZON S Max is a smart projector with an adjustable stand, designed for a set-up you can move around.
- XGIMI lists 3,100 ISO lumens and automatic focus for this model.
- Don’t compare the ISO figure directly with ANSI lumens without further explanation; they use different measurement methods.
Dangbei
According to Dangbei, the DBOX02 combines 4K projection with Google TV and Netflix support.
- Dangbei lists 2,450 ISO lumens for the DBOX02.
- Dangbei’s product information is for the German market and doesn’t confirm Dutch warranty terms or how the image will look in your living room.
Projectors at Joybuy
This selection mainly features short-throw projectors, along with one projector designed to be positioned further from the screen. For the specific model, check the projection dimensions, the set-up it requires and whether it meets the applicable EU requirements.
No image available
Optoma H117ST short-throw DLP projector, WXGA, 3,800 ANSI lumens, 3D, white
The short-throw designation may be useful if you have limited space to the projection surface; measure the distance for your chosen image size.
The stated throw ratio is 0.52:1. The resolution is WXGA and the light output is 3,800 ANSI lumens. This model uses a replaceable lamp; its stated lifespan varies by operating mode.
View at Joybuy
No image available
Optoma Photon Beam PK52
This model may suit a set-up with space between the projector and screen; check the ratio against your preferred image size and distance.
The product details list a laser light source, 4K UHD, 3,500 lumens and two HDMI inputs. The stated throw ratio is 1.21:1–1.59:1, with manual zoom.
View at Joybuy
No image available
BenQ MW809STH short-throw projector, XGA (1024 × 768)
The short-throw designation may be useful when projection distance is limited; check the stated ratio against your planned set-up.
The throw ratio is 0.49:1. The stated light output is 3,600 ANSI lumens and the native resolution is XGA.
View at Joybuy
No image available
BenQ MX825STH short-throw projector, XGA (1024 × 768), white
This short-throw model is worth comparing if space is limited; measure the distance and check that it can produce your preferred image size.
The product details list 3,500 ANSI lumens, native XGA resolution and two HDMI ports. The stated image size is 60–120 inches.
View at Joybuy
No image available
Epson EB-1780W short-throw projector, 3LCD, WXGA (1280 × 800), white and grey
The product details list automatic image correction and a carrying case; check that the projection distance suits your screen position.
The resolution is WXGA (1280 × 800). The stated white and colour light output is 3,000 lumens. The model has automatic vertical and horizontal keystone correction.
View at Joybuy
Frequently asked questions
How can you tell whether the image will fit your living room?
Measure the distance between the lens and the projection surface, along with the available wall width. Compare these measurements with the specific model’s throw ratio and your preferred image size. With UST, the depth and position of the furniture matter too.
Can you project onto a painted wall?
You can if you’re happy with the result, but the wall’s flatness and any light falling on it will affect the image. Decide in advance whether you need a projection screen, and check that any ambient-light-rejecting screen you’re considering is suitable for your projection set-up.
What maintenance and extra equipment should you check?
Check the model-specific information about the light source and maintenance, and see which connections your film source needs. Also check that built-in streaming supports your film service and that the built-in sound meets your needs.
How do warranties and the cooling-off period work when buying online in the Netherlands?
According to ACM ConsuWijzer, statutory rights exist alongside any retailer’s or manufacturer’s warranty. For most online distance purchases from a business, you have a 14-day cooling-off period; check the relevant exceptions and terms for your purchase.
Which product rules apply to a projector sold in the Netherlands?
EU product rules apply to electrical and electronic equipment, including CE marking where required. The European Union’s Your Europe website explains the CE rules. Check with the retailer that the specific model meets the applicable requirements and comes with the required product information.