People creating large design and presentation boards
First decide whether your board needs to be A3+, A2 or A1: Canon lists A2 for the PRO-1100, while HP lists A1 for the T230.
Start by choosing the largest board you want to print: an A3+ printer will only do if that size is big enough; Canon lists A2 for the imagePROGRAF PRO-1100, while HP lists A1 for the DesignJet T230. Then choose based on the content of your boards, and check the paper feed, workspace, and ink and paper costs for your needs.
First decide whether your board needs to be A3+, A2 or A1: Canon lists A2 for the PRO-1100, while HP lists A1 for the T230.
If you use photos, renders or large areas of colour, compare a printer designed for images with a model aimed at technical drawings and posters. Epson positions the SC-T2100 for technical printing.
Consider the space needed for the printer, as well as for paper input and output. The Dutch Consumers’ Association lists the space required as something to consider when comparing A3 printers.
Start with the required finished size, then compare the type of printing, the paper and the practical space you have available at home.
| Consideration | What to look for | Who is this important for? |
|---|---|---|
| Finished size and paper width | Decide on the board size and check whether the exact model supports the required width, either on a roll or as a cut sheet. | If I want to print a board larger than A3+, I need to know whether the model can handle that size. Around 33% of consumers give the required finished size top priority. |
| Images or line drawings | Compare the stated uses and media for the exact model with your files; if colour accuracy matters, make a test print if needed. | For photos, renders or large areas of colour, I want to choose a printer that suits the type of image, not just the paper size. Image reproduction comes first for around 27% of consumers. |
| Ink and paper costs | Check the ink for the exact model and factor in your board size, choice of paper and printing frequency. | If I print boards regularly, I want to be able to estimate the ongoing costs of ink and suitable paper. Around 20% of consumers put these running costs at the top of their list. |
| Workspace and paper feed | Measure the space, allowing room for paper input and output; check whether rolls, cut sheets and your preferred connection are supported. | In a home office, I want to know how much space the entire printing process needs, not just how much room the printer itself takes up. Workspace and paper handling are the main concern for around 20% of consumers. |
Brother says the MFC-J6959DW can print on long rolls, but the specified roll width is 29,7 cm. So a long print isn’t automatically wide enough for your board.
Check both the width and length of the finished board before choosing a roll printer.
If the width isn’t sufficient, you may need to use a print service or choose another printer.
Epson’s stated yield for the ET-18100 is based on 10 × 15 cm photos; it doesn’t tell you directly how much ink a presentation board will need.
Estimate your usage based on your own board size and paper, rather than converting the photo yield directly.
HP says the DesignJet T230 has dynamic security that may block cartridges without a new or reused HP chip.
Check the current compatibility terms and available replacement cartridges before choosing this model.
This may limit your choice of cartridges.
When printing from rolls or on large sheets, you also need space for paper input and the printout. Canon gives the TC-21’s dimensions as 968 × 533 × 245 mm.
Measure the entire workspace and allow for the paper size and output.
Canon offers models for different sizes, from the 24-inch imagePROGRAF TC-21 to the A2 desktop imagePROGRAF PRO-1100.
Epson positions the SC-T2100 for large-format technical printing and the ET-18100 as an A3+ photo printer with refillable ink tanks.
HP positions the DesignJet T230 as a 24-inch plotter for printing sizes including A1.
According to Brother, the MFC-J6959DW combines A3 printing and multifunction use with an option for long roll prints.
This product selection is aimed at presentation boards up to A3 for a home workspace. For larger boards, you’ll need a printer that supports the relevant size.
No image available
Suitable for presentation boards up to A3 if you also want to combine printing, scanning and copying in one home workspace.
The product title lists 4800 × 1200 DPI and Wi-Fi; scanning and copying are also mentioned.
Not based on print length alone. Brother specifies a roll width of 29,7 cm for the MFC-J6959DW, so compare the width your board needs separately with the supported paper width.
Check the specifications for the exact model to see whether your size is supported as a roll or cut sheet. Epson lists support for rolls up to 24 inches and cut sheets up to A3 for the SC-T2100; Canon lists both feed types for the TC-21. Also leave enough room for the output.
Factor in your own size, choice of paper, ink usage and printing frequency. Epson’s stated yield for the ET-18100 is based on 10 × 15 cm photos, so it doesn’t directly indicate the ink usage for large presentation boards.
If you genuinely run a business from home, the Netherlands Chamber of Commerce (KVK) advises checking your local authority’s environmental plan, as well as any conditions set by your landlord, mortgage provider or owners’ association. This is not a general permit requirement for every personal printer in a home office.