Which printer option is right for you?

CAD drafter working from home

You print technical plans larger than A3 and want to check the paper width, file workflow and space you’ll need beforehand. Models from Canon Netherlands, HP and Epson offer different options for roll and sheet feeding.

Designer working with A0 plans

You sometimes need to print a full A0 plan and want to avoid a 24-inch printer that’s only suitable if you reduce the size. HP specifies a media width of up to 914 mm for the 36-inch DesignJet T650.

Designer working exclusively with A3 plans

You can work with A3 and may also want to scan or copy documents. Brother lists these functions up to A3 for the MFC-J6960DW; check that the size limit suits your originals.

What should you look for when choosing?

A3 all-in-one

A good fit if: you can review your plans at A3 and also want to scan or copy.

Bear in mind: A3 isn’t a substitute for a plotter if your plan needs to remain at A1 or A0.

24-inch plotter

A good fit if: you want to print plans larger than A3 on rolls or individual sheets and are considering a desktop model.

Bear in mind: paper feeding, output space and file workflows vary by model; measuring the printer itself isn’t enough.

36-inch plotter

A good fit if: you need A0 plans and are looking for a model specified for that size.

Bear in mind: check that the printer, paper roll and space for the printout all fit in your home office.

First, work out the largest plan size you need to print without changing its scale. Then compare the workspace, file handling and any additional features you’ll actually use.

Consideration What should you check? Who is this important for?
Plan size Check the largest paper size you need and whether you want to use rolls, individual sheets or both. If I need a plan at its intended scale, I don’t want to find out that the printer can’t handle the size. Around 29% of consumers prioritise plan size.
Workspace Compare the printer’s dimensions with the space available, allowing room for paper feeding and output. In a home office, I want to know beforehand whether there’s room for both the printer and the paper while printing. Around 24% of consumers prioritise how easily the printer will fit.
File workflow Check the route from your CAD or PDF software and any required printer languages, such as HP-GL/2. If my drawings come through a set software or file workflow, I want to check it works with the model I choose. Around 18% of consumers prioritise how drawing files are handled.
Consumables and maintenance Compare the right ink, paper rolls and replaceable maintenance parts for the way you print. If I print plans regularly, I also want to know which consumables and maintenance my usage will involve. Around 18% of consumers prioritise ongoing consumable and maintenance costs.
Scanning and copying Check the maximum scan size separately from the print size, and see which document functions the model offers. If I want to digitise existing drawings, the original also needs to fit in the scanner. Around 12% of consumers prioritise scanning and document tasks.

Buying pitfalls

  • Assuming ‘large format’ means A0

    An A3 all-in-one, a 24-inch plotter and a 36-inch plotter don’t cover the same size range. If a printer doesn’t support the size you need for your plan, you may have to reduce it or print it elsewhere.

    Make a note of the largest plan size you need and check the model’s specifications for paper width, media and feeding before you choose.

  • Confusing print size with scan size

    A large-format printing function doesn’t automatically mean the built-in scanner can handle originals of the same size. Canon specifies a maximum document size of A4/LTR for the scanner on the TC-21M.

    Compare the maximum scan and print sizes separately if you want to digitise existing drawings.

  • Focusing only on the purchase price

    Ink, paper and maintenance parts also affect the cost of using a printer. The right consumables and ink system vary by model.

    Compare compatible ink and the paper you’ll need for your own print volume. HP lists dynamic cartridge security for the DesignJet T250, so check compatibility if you’re considering other cartridges.

  • Assuming every plotter handles the same CAD files

    Supported printer languages and direct file workflows vary by model. Canon lists HP-GL/2 for the TM-240, but not for the TC-21.

    Check the required file workflow from your own software rather than comparing print resolution alone.

    If your workflow isn’t directly compatible, you may need to convert files or make other adjustments.

Brands to consider

Canon

Canon’s imagePROGRAF range includes the compact 24-inch TC-21 and the separate TM-240 for technical workflows.

  • Canon lists roll and sheet feeding, four pigment colours and dimensions of 968 × 533 × 245 mm for the TC-21.
  • Canon lists HP-GL/2 for the TM-240, but not for the TC-21. These are manufacturer specifications, not the results of an independent performance test.

HP

The DesignJet models mentioned include the 24-inch T250 for A1 and the 36-inch T650 for A0.

  • HP lists roll and sheet feeding and an automatic horizontal cutter for the T250.
  • HP warns that dynamic cartridge security applies to the DesignJet models mentioned. Its use and compatibility vary by model.

Epson

The SureColor SC-T2100 is a 24-inch option; the SC-T3100x is a separate 24-inch model with refillable ink.

  • Epson says the SC-T2100 can switch between a 24-inch roll and individual sheets up to A3. The SC-T3100x uses 140 ml ink bottles, with pigment black and dye-based colours.
  • Epson’s statements about running costs and print durability are manufacturer claims. Without comparable cost figures or an independent test, they don’t establish a general advantage.

Brother

The MFC-J6960DW is an A3 all-in-one for anyone looking for scanning and copying as well as printing.

  • Brother lists printing, scanning and copying up to A3.
  • This A3 model isn’t a substitute for a roll-feed plotter if your building plan needs to be larger than A3.

Joybuy products for A3 documents

This Joybuy pick suits the A3 all-in-one option if you want to scan and copy as well as print.

Epson EcoTank ET-M16680 A3 inkjet printer

Epson EcoTank ET-M16680 A3 4800 x 1200 DPI Wi-Fi

A good fit for a workspace where you want A3 printing as well as additional scanning and copying functions.

The product title lists a resolution of 4800 x 1200 DPI and Wi-Fi; the product description mentions an automatic document feeder and an ink tank.

Joybuy

Frequently asked questions

Can I choose an A3 all-in-one for building plans?

Yes, if A3 is large enough for the plans you need to use at their intended scale. Brother lists printing, scanning and copying up to A3 for the MFC-J6960DW. For plans you need at A1 or A0, you’ll need an option that supports that larger size.

Can a printer that prints A1 also scan an A1 original?

Not necessarily: the maximum scan size may be smaller than the print size. Canon lists a maximum document size of A4/LTR for the scanner in the imagePROGRAF TC-21M, so check the scanning and printing functions separately.

What should I check before printing a full plan?

Check the paper size and scale preview in the print preview. ArchitectuurNL recommends using a print preview to check how the plan will look beforehand. This is practical guidance, not proof that a particular device will automatically maintain the set scale.

Does every printer in the Netherlands come with a two-year guarantee and a 14-day cooling-off period?

No, these time limits don’t apply as a general rule in every case. The Dutch government says there’s no fixed statutory guarantee period in the Netherlands; what matters is what you can reasonably expect from the product. For many online purchases from a business, consumers have a 14-day cooling-off period, with some exceptions. Check separately which rules apply if you’re buying for business use.

What safety documentation is relevant for an electrical printer?

According to the Dutch Ondernemersplein, businesses that place electrical or electronic equipment on the market or trade in it must comply with the applicable European rules. A product page alone doesn’t confirm that the documentation for a particular item has been checked. If in doubt, ask the seller for the relevant product documentation.