Someone working with files across several floors
You want to work on two floors away from the router. So, work out how many receiving adapters you need and whether the connection between the sockets you choose is suitable for your needs.
Start by deciding whether you need Ethernet or Wi-Fi at each workspace. Then count how many receiving floors need their own adapter. A two-piece starter kit does not automatically provide a connection point on both floors away from the router. The stated powerline speed does not guarantee the file transfer rate your home wiring can achieve, so assess the connection at the sockets you plan to use.
You want to work on two floors away from the router. So, work out how many receiving adapters you need and whether the connection between the sockets you choose is suitable for your needs.
You share large project files from a computer or network storage device using Ethernet. Don’t just check the port: also consider the transfer rate you can actually achieve at your workstation.
You want to work wirelessly on a laptop on the receiving floor. Check that the adapter on that floor provides Wi-Fi, and whether you also need a wired Ethernet connection.
Suitable if: your computer or network storage device has Ethernet at a fixed workstation and running a cable between floors is impractical.
Bear in mind: a wired-only adapter does not provide Wi-Fi for a laptop.
Suitable if: you use a laptop or another wireless device on the receiving floor.
Bear in mind: Wi-Fi adds a wireless leg to the connection over your mains wiring.
Suitable if: you can run a network cable and prioritise predictable throughput for large or frequent file transfers.
Bear in mind: installation takes more work than setting up powerline.
First, count the workstations that will receive the connection and decide whether each needs Wi-Fi, Ethernet or both. Then test the connection at the sockets you plan to use. The stated powerline speed is not a measure of the file transfer rate you’ll get at home.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Connection between floors | Test a file transfer at the sockets in both intended workspaces, including while ordinary electrical appliances are in use. | I want to access my project files from both floors, even when I’m not working near the router. Around 36% of consumers prioritise a usable connection between floors. |
| Wired file transfer | Check the Ethernet ports on your devices and, where possible, compare the transfer rate with a direct wired connection. | I work from a desktop computer or network storage and want to share files over a wired connection. Around 29% of consumers prioritise usable wired file transfers. |
| Wi-Fi at the workstation | Check whether the adapter on the receiving floor provides Wi-Fi, and whether you also need an Ethernet port there. | I want to work wirelessly on my laptop on the floor where I need my files. Around 21% of consumers prioritise Wi-Fi at their workstation. |
| Expansion and compatibility | Make a note of the full model names and standards of your existing adapters; count connection points separately from LAN ports. | I want to expand an existing powerline kit or connect an additional workstation later. Around 14% of consumers prioritise compatibility and expandability. |
TP-Link states that actual powerline throughput can vary due to factors such as electrical interference and the condition of the mains wiring.
Test an actual file transfer at the workstations you plan to use. Treat the stated speed as a product specification, not as a measurement from your home.
Multiple LAN ports provide connections in one location; they do not create separate powerline connection points on other floors.
Map out the router location and both receiving workstations. Then count the number of adapters and the LAN ports needed at each location.
TP-Link says that its G.hn adapters are not compatible with HomePlug AV/AV2. devolo states that Magic and dLAN cannot work together as a single powerline network.
Before expanding your setup, check the full model names and standards of both your existing and new adapters.
The Joybuy product page for the TP-Link TL-WPA7517 KIT lists a type E plug. Check that the version you’re considering suits your socket and intended setup.
Before buying, check the plug type of the specific version and make sure it has a passthrough socket if you need one.
According to the model specifications, the range includes wired HomePlug AV2 kits and G.hn models with or without Wi-Fi.
The Magic range includes wired and wireless powerline options. The manufacturer describes the Magic 2 LAN triple as suitable for connecting several wired devices in one location.
According to the manufacturer, the FRITZ!Powerline 1260 Set combines powerline, Wi-Fi and a gigabit LAN port.
Strong describes the Powerline 2000 Duo EU as a wired, two-piece HomePlug AV2 kit with a passthrough socket.
These product picks focus on powerline for a workstation on another floor, with models that offer Wi-Fi and a wired option. For each version, check the number of adapters, connections and plug type you need.
No image available
The product description mentions powerline for wired and wireless connections, which may suit you if you need Wi-Fi at the receiving workstation.
The Joybuy product page lists a type E plug. Check that this version is suitable for the sockets and setup you plan to use.
No image available
The product title lists Wi-Fi and Ethernet LAN, so you can weigh up these connection options for a wireless or wired workstation.
The title lists 1200 Mbit/s and a two-piece kit. That does not automatically provide a receiving connection point on both floors away from the router.
No image available
This wired powerline option may suit a fixed workstation with a device that connects via Ethernet.
The product details list two units and Fast Ethernet ports of 10/100 Mbit/s. Check that the stated port speed is suitable for your file transfers. Two units do not automatically provide receiving connection points on both floors away from the router.
You need one adapter by the router and a receiving adapter at each separate location where you want to connect via powerline. Check what’s included in the kit: a two-piece starter kit does not automatically provide receivers on both other floors.
Connect the adapter by the router using an Ethernet cable, then plug a receiving adapter in at the workstation. Follow the model’s pairing instructions and secure the router and any Wi-Fi network with a strong password. It’s also important to manage access to your project files.
Try another suitable wall socket and test the file transfer again. TP-Link lists electrical interference and the condition of the electrical circuit as factors that can affect actual throughput and range.
Factor in any extra receiving adapters you may need. According to ACM ConsuWijzer, the statutory 14-day withdrawal period for an online consumer purchase ends 14 days after delivery. The statutory guarantee is separate from any warranty period stated by the manufacturer.
Equipment sold in the Netherlands must meet the applicable European product requirements. The Dutch Authority for Digital Infrastructure lists CE marking as a requirement. Check the specific version, as being included in a ranking does not confirm that an individual listing meets the requirements.