Who is powerline suitable for?

Watching on a TV

Your TV or streaming device is behind thick walls and can connect via Ethernet. In that case, start by comparing a wired powerline kit.

Watching on a tablet

You watch wirelessly in a room further away. Choose a kit where the adapter by your viewing spot broadcasts Wi-Fi; a LAN port alone won’t be enough.

Extending an existing network

You want to extend an existing powerline setup. Before buying, check the product range and the full model names of your current adapters.

What should you look for when choosing?

Choose based on the device you’ll be watching on, then test the connection at the intended location. NETGEAR recommends plugging powerline adapters directly into a wall socket, not into an extension lead or surge protector.

Powerline with Ethernet

Choose this when: you watch on a TV or streaming device with Ethernet and don’t need extra Wi-Fi at that location.

Trade-off: you won’t need to run a long network cable through your home, but the connection will still depend on your electrical wiring.

Powerline with Wi-Fi

Choose this when: you watch on a tablet, phone or other wireless device behind thick walls.

Trade-off: the adapter provides Wi-Fi at your viewing spot, but the connection from your router still runs through your home’s wiring.

Ethernet cable or another networking solution

Choose this when: you can run a cable to your viewing spot, or powerline doesn’t provide a usable stream there.

Trade-off: running a cable takes work; assess a wireless solution where you’ll actually be watching.

What to consider What should you check? Who should pay particular attention?
Connection at your viewing spot Test both intended wall sockets with a film stream; try other sockets if needed. If I watch behind thick walls, I want to know whether the stream will still work well in that exact spot; around 38% of consumers prioritise the connection where they watch.
Ethernet for a TV Check whether your TV or receiver has Ethernet and how many LAN ports the adapter at your viewing spot provides. For my TV or streaming device, I want a direct LAN connection; around 23% of consumers prioritise a wired connection at their viewing spot.
Wi-Fi for wireless viewing Check which adapter broadcasts Wi-Fi and whether you also need Ethernet at that location. If I watch on a tablet or phone, I need Wi-Fi in the room further away; around 23% of consumers prioritise wireless viewing.
Expansion and compatibility Note the full model names and product range of your current adapters before choosing an add-on. With an existing powerline network, I want to know whether a new adapter will work with it; around 16% of consumers prioritise expanding their setup.

Common buying mistakes

  • Assuming the Mbps figure on the box is your guaranteed streaming speed

    The stated figure isn’t a measurement taken where you watch. Your electrical wiring and sources of interference can affect the connection. Netflix warns that a slow or unstable connection can reduce picture quality.

    Play a film where you’ll be watching, and don’t base your choice solely on the product’s maximum stated specification.

  • Buying a LAN kit for a tablet

    An Ethernet port on the adapter by your viewing spot won’t, on its own, provide Wi-Fi for a tablet or phone.

    Check whether the receiving adapter broadcasts Wi-Fi. If not, you may need a separate Wi-Fi access point or a different kit.

  • Confusing an add-on adapter with a starter kit

    A new powerline connection needs one adapter by the router and a receiving adapter at your viewing spot.

    Check how many adapters are included in the kit and whether they’re suitable for your existing network. An add-on adapter on its own may mean you still need a compatible adapter.

  • Assuming devolo Magic and dLAN are interchangeable

    According to devolo, adapters from the Magic and dLAN ranges aren’t compatible.

    Note the existing product range and full model names before buying a standalone adapter; an incompatible add-on may mean you need a different adapter.

Brands to compare

TP-Link

The range includes powerline kits with network ports only, as well as kits with Wi-Fi on the receiving adapter.

  • According to TP-Link, the TL-WPA7517 KIT V2 has dual-band 802.11ac Wi-Fi and a gigabit port.
  • Check the hardware version of the item on offer. The stated 1000 Mbps isn’t a measurement taken in your home.

devolo

The Magic range includes the wired Magic 2 LAN triple Starter Kit and the Magic 2 WiFi 6 next Starter Kit.

  • According to devolo, the Magic 2 LAN triple has three gigabit ports on the adapter by your viewing spot; the WiFi 6 next provides Wi-Fi and two gigabit ports.
  • According to devolo, Magic and dLAN aren’t compatible. Manufacturer specifications don’t guarantee results in a particular home.

NETGEAR

The PLP2000 is a wired HomePlug AV2 kit with two adapters and a pass-through socket.

  • NETGEAR specifies one gigabit port per adapter and recommends plugging them directly into wall sockets.
  • The PLP2000 doesn’t have Wi-Fi. The stated 2000 Mbps isn’t a measured throughput at your viewing spot.

FRITZ!

The FRITZ!Powerline 1240 AX WLAN Set combines powerline with Wi-Fi 6 and LAN for wireless viewing.

  • According to FRITZ!, this kit has two gigabit LAN connections on the Wi-Fi adapter.
  • Mesh features are only relevant if your home setup supports the relevant FRITZ! feature. Stated speeds aren’t measurements taken in your home.

Powerline products at Joybuy

These products include powerline starter kits for wireless viewing or a wired Ethernet connection at your viewing spot.

TP-Link TL-WPA7517 KIT powerline starter kit

TP-Link TL-WPA7517 KIT

A starter kit for a viewing spot where you need wireless access; check which adapter broadcasts Wi-Fi.

Check the product details to see which connections are included with the hardware version on offer.

View at Joybuy
TP-Link TL-WPA7617 KIT powerline kit with Wi-Fi and Ethernet LAN

TP-Link TL-WPA7617 KIT

Suitable for a viewing spot where you need Wi-Fi and may also want a wired connection.

The product name lists 1200 Mbit/s, Ethernet LAN, Wi-Fi and 2 units. The stated figure isn’t a measurement taken where you watch.

View at Joybuy
TP-Link TL-PA4015P KIT powerline kit with Ethernet LAN

TP-Link TL-PA4015P KIT

Suitable for a TV or streaming device with Ethernet; check that the connections meet the needs of the devices at your viewing spot.

The product name lists 500 Mbit/s, Ethernet LAN and 2 units. The stated figure isn’t a measurement taken in your home.

View at Joybuy

Frequently asked questions

How many adapters do I need for one viewing spot?

For a new powerline connection, you need one adapter by the router and a receiving adapter at your viewing spot. Check that you’re buying a starter kit with two adapters, rather than just an add-on adapter.

Should I plug the adapters into an extension lead?

NETGEAR recommends plugging an adapter directly into a wall socket, not into an extension lead or surge protector. If performance is disappointing, try another wall socket.

What speed do I need to watch a film in 4K?

It varies by streaming service. Netflix recommends a stable internet connection of 15 Mbps or higher for its own 4K UHD stream. This isn’t a guaranteed powerline throughput or a universal requirement for all services. Check the speed on your viewing device and the requirements of your streaming service.

Can I add a new devolo Magic adapter to my old dLAN kit?

No. According to devolo, Magic and dLAN devices aren’t compatible for technical reasons. Check the product range of your existing adapters before choosing an add-on.

What can I do if an adapter I’ve bought is faulty?

According to the Dutch government, the seller must provide a solution if a product is faulty. In the Netherlands, there isn’t a fixed two-year statutory warranty period for all products; the expected lifespan depends on the product and the circumstances.