Presenter with a network receiver
You want to connect a device to the network by cable on the other side of the hallway, without running a loose cable across a walkway. First, check how the device receives the presentation.
A powerline kit can help if the presentation receiver on the other side of the hallway works over the network and you want to use your existing electrical wiring for the network connection. Choose Ethernet for a compatible wired device, or Wi-Fi if the receiver needs to connect to the network wirelessly. Test the kit in the sockets you intend to use. A standard powerline adapter does not send HDMI video to a screen.
You want to connect a device to the network by cable on the other side of the hallway, without running a loose cable across a walkway. First, check how the device receives the presentation.
Your presentation setup can work wirelessly over the network, but needs better network coverage where the receiver is located. A powerline Wi-Fi kit is only suitable if the electrical connection there is usable.
You’re not sure whether the intended sockets will provide a usable powerline connection, and want to be able to test the kit in the actual location first.
First, check whether the receiver can handle the presentation over the network. Then choose between Ethernet and Wi-Fi, and test the powerline connection on site before relying on it for a presentation.
| Concern | What to look for when buying | Who is this important for? |
|---|---|---|
| Network connection for the presentation | Check how the receiver handles video and whether the kit includes the adapters and Ethernet ports you need. | I want to connect a compatible device to the network without running a cable across a walkway. Around 33% of consumers prioritise a wired network connection for presentations. |
| Performance over the electrical wiring | Test the adapters directly in the intended wall sockets with your actual presentation setup. | If the connection needs to work in this particular location, I want to be able to try it there. Around 25% of consumers say their electrical installation is the deciding factor. |
| Wi-Fi at the presentation location | Check whether the adapter at the receiving end provides Wi-Fi and whether the presentation feature works over that network. | I want to connect a compatible receiver wirelessly on the other side of the hallway. Around 25% of consumers prioritise Wi-Fi in that location. |
| Sockets and existing adapters | Check how many adapters and ports you need, whether pass-through sockets are required, and whether the kit is compatible with your existing powerline range. | I want to know whether the kit will work with my sockets and existing adapters. Around 17% of consumers are mainly concerned about connections or expanding their setup. |
A network connection over your electrical wiring doesn’t mean a screen can display the presentation. You’ll also need a suitable network feature or video receiver.
First, check how the screen or receiver gets its video signal. If the screen only has HDMI for your intended setup, choose a suitable video solution rather than relying on a standard powerline adapter.
If your setup only has HDMI, you may need a separate, compatible video receiver or presentation solution.
TP-Link explains that the stated powerline speed is not the same as the actual data rate. Your electrical installation and interference can affect the connection.
Test both adapters directly in the intended wall sockets and try the complete presentation setup, rather than just testing the adapters side by side next to the router.
According to devolo, older dLAN adapters are not supported by Magic.
Make a note of the full model names and standards of your existing adapters before choosing an expansion or a new kit.
If your existing adapters don’t work with the range you choose, you may need a compatible second adapter or a different complete kit.
TP-Link offers Ethernet-focused powerline kits and Wi-Fi kits, including the TL-PA7017 KIT and TL-WPA7517 KIT.
The Magic 2 LAN Starter Kit is designed for network access via Ethernet; separate Magic Wi-Fi models are available if you need Wi-Fi.
The FRITZ!Powerline 1220 Set is Ethernet-focused, while the 1260 WLAN Set adds Wi-Fi.
These products are powerline kits for a network connection between the router and the room with the receiver: one Ethernet-focused kit and one kit with Wi-Fi. To share video, the receiver must also be able to handle the presentation over the network.
Image unavailable
Suitable if the receiver on the other side of the hallway works over a wired network connection; the kit does not send HDMI video itself.
The product name specifies 500 Mbit/s and a set of 2. TP-Link explains that the stated powerline speed is not the actual data rate, so test the connection in the sockets you intend to use.
Image unavailable
Suitable if a compatible receiver on the other side of the hallway needs to connect to the network wirelessly; the presentation itself must also work over the network.
TP-Link describes the TL-WPA7517 KIT as an AV1000 gigabit powerline Wi-Fi kit. The stated powerline speed is not a guarantee of the actual data rate, so test the kit in the sockets you intend to use.
No. Standard powerline kits extend a network over your electrical wiring, but they don’t send HDMI video to a screen themselves. You’ll also need a suitable network presentation feature or receiver. If your setup only has HDMI, choose an appropriate video solution.
Connect the first adapter to the network using Ethernet and plug the second in near the receiving device; pair them according to the instructions. Test the adapters directly in the intended wall sockets, then try your actual presentation. An extension lead may affect the powerline connection.
Try other suitable wall sockets and check for possible electrical interference. According to ACM ConsuWijzer, when a consumer makes an online purchase, they generally have up to 14 days from delivery to change their mind, subject to legal exceptions. Your statutory guarantee is separate from any manufacturer’s warranty; a poor connection caused by the building’s wiring doesn’t automatically mean the product is faulty.
Check that the exact product version has the relevant markings and documentation. Ondernemersplein explains that electrical equipment placed on the market must comply with applicable European product rules, including CE marking and an EU declaration of conformity from the manufacturer. A CE mark doesn’t tell you whether the powerline connection will work well in your location.