Who is this guide for?

Attic listener using a phone

You download on a floor where the router’s Wi-Fi signal is weak and need Wi-Fi there; an Ethernet connection alone is not enough.

Homeowner who wants to test the wiring first

You want to know whether the connection between the sockets by the router and the socket on your chosen floor will work in your home before choosing a kit.

Household with two remote floors

You are considering more than one receiving adapter because you may need a connection on two floors; the number of Wi-Fi access points depends on where you use your wireless devices.

What should you look for when buying?

First, choose a kit to suit the device you use to download, then work out how many floors actually need Wi-Fi. Assess the connection at the location you have in mind, rather than relying on the speed shown on the packaging.

What to consider What to look for Who is this important for?
Connection through your home’s wiring Test a compatible kit in the wall sockets by the router and at your listening location; try an actual download there. I want to find out first whether the connection through my home’s wiring reaches the floor; without that connection, an extra Wi-Fi access point will not help. Around 36% of consumers make a connection between floors their top priority.
Wi-Fi where you download Check that the receiving adapter broadcasts Wi-Fi; an Ethernet port alone will not give a phone or tablet Wi-Fi access. If I listen on my phone in the attic, I need Wi-Fi there, not just a socket for a network cable. Around 29% of consumers make Wi-Fi where they download their top priority.
Number of floors and adapters Decide which remote locations need Wi-Fi and check compatibility with any adapters you already have. I want a connection on two remote floors, not just where I listen. Around 21% of consumers make coverage across multiple floors their top priority.
Choosing the right-sized kit Compare the kit’s features and contents with the number of locations and the device you want to connect. For a single download location, I do not want to buy adapters I do not need. Around 14% of consumers make avoiding unnecessary equipment their top priority.

Common pitfalls

  • Assuming the speed on the packaging is the download speed you’ll get in the attic

    TP-Link distinguishes between the maximum powerline connection speed and actual throughput. Wiring and electrical conditions vary from home to home, so a stated maximum is not a measurement of your connection.

    Test the kit using the sockets you plan to use, then check the connection by downloading something where you want to listen.

  • Choosing an adapter without Wi-Fi for a phone

    An Ethernet-only adapter does not provide Wi-Fi to a phone or tablet on the receiving floor.

    Check that the adapter at the receiving end has Wi-Fi. If your device only connects wirelessly, an Ethernet port on its own is not enough.

    Otherwise, you may still need a separate Wi-Fi access point or a different adapter.

  • Assuming one extra Wi-Fi access point will cover every floor

    An adapter in one remote location does not automatically provide Wi-Fi on another floor too.

    Work out where you actually need Wi-Fi and test each location you have in mind before choosing extra adapters.

    You may need an additional compatible adapter for a second remote location.

  • Choosing an extension adapter based on the brand name alone

    According to devolo, Magic and dLAN adapters cannot be combined to create a single powerline network.

    Check the product range and powerline standard of any adapters you already use before choosing an extension.

    An adapter from an incompatible product range may mean replacing your existing equipment.

Relevant brands

TP-Link

TP-Link describes kits with a wired receiver, as well as kits that add Wi-Fi at the receiving location.

  • According to TP-Link, the TL-PA7017P KIT has a gigabit port and a pass-through socket; the TL-WPA7517 KIT adds Wi-Fi at the receiving location.
  • TP-Link explains that the stated powerline speed is not the same as actual throughput. These features apply to these models and not necessarily to every kit from the brand.

devolo

Devolo describes Magic kits for one receiving location and a Multiroom Kit with Wi-Fi in two locations.

  • According to devolo, the Magic 2 WiFi next Multiroom Kit contains three adapters, two of which have Wi-Fi.
  • The Multiroom Kit is more equipment than you need for one location. Devolo says that Magic and the older dLAN range cannot form a single powerline network together.

FRITZ!

FRITZ! describes the FRITZ!Powerline 1260 Set as combining powerline, Wi-Fi and a gigabit LAN connection at the receiving location.

  • According to FRITZ!, mesh Wi-Fi is possible when used with FRITZ! devices.
  • The stated maximum speeds do not tell you what download speed the kit will achieve in your home.

NETGEAR

NETGEAR describes the PLP2000 as a two-piece HomePlug AV2 kit for a wired receiving location.

  • NETGEAR specifies two gigabit Ethernet ports per adapter.
  • According to NETGEAR, the PLP2000 does not have Wi-Fi; the stated 2000 Mbit/s is a product specification, not a measurement of the download speed in your home.

Products on Joybuy

This Joybuy product selection focuses on a powerline kit with Wi-Fi for listening on a remote floor.

TP-Link TL-WPA7517 KIT powerline starter kit

TP-Link TL-WPA7517 KIT powerline starter kit

The product description says it extends both wired and wireless networks through your home’s electrical wiring, making it suitable for a download location where you need Wi-Fi.

Stated maximum transmission speed: 1000 Mbit/s. This is not a guaranteed real-world throughput in your home.

Check that the kit includes the adapters you need; a working powerline connection requires at least two compatible adapters if you do not already have one by the router.

Joybuy

Frequently asked questions

How do you set up a powerline kit for downloading in the attic?

Connect one adapter to the router via Ethernet and place the other on the floor you want to use. TP-Link recommends plugging the adapters directly into wall sockets rather than into extension leads or surge protectors; test the connection where you plan to listen.

Does AV1000 mean I can download at 1000 Mbit/s?

No. According to TP-Link, this refers to the maximum powerline connection speed, not actual throughput. The wiring and electrical conditions in your home affect the connection.

Can an existing devolo dLAN adapter work with a Magic adapter on the same network?

No. Devolo says that dLAN and Magic cannot be combined to form a single powerline network. So check which product range you already use before adding an adapter.

What can I do if the connection in my home is not good enough?

According to the Dutch government, many online purchases from a business come with a 14-day cooling-off period; terms and exceptions apply. Running a network cable to a Wi-Fi access point is an alternative if you can install one.

What should I look for when buying a powerline adapter in the Netherlands?

The Dutch regulator RDI states that electrical, electronic and radio equipment must meet the applicable European product requirements, and that only products bearing the CE mark may be sold in Europe. A CE marking on its own is not an independent test of the connection or download speed.