Who is this relevant to?

Home worker with a workspace on another floor

Wants to connect a desktop computer to the router or a backup location without running a long network cable through the house. Test the connection using the sockets you plan to use.

Home worker with sensitive work documents

Wants to keep documents available for backup, without assuming that a powerline connection backs them up or provides suitable data protection by itself.

Resident with workspaces on several floors

Needs a connection on more than one floor as well as by the router, so checks the number of adapters and ports, and whether the chosen range can be expanded.

What should you consider when choosing?

First, map out where your router, workspace and any network storage are located. Then decide between a wired Ethernet connection and Wi-Fi on the receiving floor, and test the powerline connection using the sockets you intend to use.

What to consider What should you look for? Who is this important for?
Usable connection between floors Test the sockets you plan to use, with your usual electrical appliances switched on too. Compare the result with what your backup task requires. I want to know whether the connection on my work floor can handle my backup. Around 31% of consumers say a usable connection between floors is their main concern.
Backup and document protection Choose an approved destination, set up the backup and check that you can restore files. Also follow your employer’s policies. I want to be able not only to copy sensitive work documents, but also to restore and protect them appropriately. Around 25% of consumers prioritise recoverability and document protection.
Adapters and connections Count the receiving locations and check how many adapters and Ethernet ports are included in the exact kit. I need connections on several floors or for different fixed devices. Around 19% of consumers prioritise the number of connection points they need.
Compatibility with existing adapters Note down the full model numbers and powerline standards, then check whether the chosen range will work with them. I want to keep using my existing powerline kit if I expand it. Around 13% of consumers prioritise this compatibility.
Cost of the setup Compare complete setups with the same number of receiving locations, including any additional adapters. Check the returns policy in advance. I want to compare the kit needed for all locations, not just the price of a starter kit. Around 12% of consumers prioritise the total cost of the setup.

Common pitfalls

  • Assuming the stated powerline speed is your guaranteed backup speed

    Your electrical wiring and connected devices affect the connection; the model’s stated speed doesn’t tell you how it will perform using your sockets.

    Test the full backup task using the sockets you plan to use before choosing a setup for every floor.

  • Choosing a two-piece starter kit for two separate receiving locations

    One adapter goes by the router, leaving just one for a receiving location in a two-piece kit.

    Count the router location and all the receiving locations you need, then check how many adapters are in the exact pack.

  • Adding an adapter with a different standard without checking compatibility

    TP-Link states that G.hn adapters aren’t compatible with HomePlug AV/AV2. According to devolo, Magic adapters aren’t supported in a dLAN range.

    Before buying, compare the full model numbers and standards of your existing adapters and any new ones.

  • Confusing a network connection with a backup

    Powerline carries network traffic, but it doesn’t create or store a restorable copy of your files.

    Set up the backup to an approved destination and check that you can restore your files.

Brands to consider

TP-Link

The product ranges mentioned include HomePlug AV2 and G.hn kits, with options both with and without Wi-Fi.

  • TP-Link lists a gigabit port and pass-through socket for the TL-PA8010P KIT, and Wi-Fi 6 for the PGW2440 KIT.
  • TP-Link says that G.hn adapters aren’t compatible with HomePlug AV/AV2. Stated speeds aren’t measurements of performance in your home.

devolo

According to devolo, the Magic 2 LAN range includes starter and network kits with different numbers of adapters, for uses including wired workspaces.

  • According to devolo, the Magic 2 LAN triple adapter has three gigabit LAN ports. The manufacturer says the Magic range can be expanded within that range.
  • According to devolo, Magic doesn’t support dLAN adapters. Stated speeds aren’t measurements of performance in a specific home.

FRITZ!

The range mentioned includes the wired FRITZ!Powerline 1220 Set and kits that provide Wi-Fi at a receiving location.

  • According to FRITZ!, each device in the 1220 Set has two gigabit LAN ports and a pass-through socket.
  • The wired 1220 Set doesn’t add a Wi-Fi access point. Its stated maximum speed isn’t a measurement of performance in your home.

NETGEAR

NETGEAR describes powerline as a way to extend a wired connection when Wi-Fi struggles because of distance or walls.

  • NETGEAR recommends plugging the adapter directly into a wall socket.
  • NETGEAR notes that high-power devices can cause interference; check the connection where you plan to use it.

Powerline products at Joybuy

These Joybuy powerline kits are designed for a workspace on another floor, with options for Wi-Fi or a wired connection.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

A good fit if you also want Wi-Fi on the receiving floor; check the connection where you’ll be using the backup.

The product information lists Wi-Fi and speeds of up to 1000 Mbit/s; this isn’t a measurement of performance in your home.

View at Joybuy
TP-Link TL-WPA7617 KIT powerline adapter kit

TP-Link TL-WPA7617 KIT powerline adapter kit

An option if you want Wi-Fi on the receiving floor; the connection still depends on your home’s electrical wiring.

The product information lists Wi-Fi, a pack of two and a stated maximum speed of 1200 Mbit/s. This isn’t a measurement of performance in your home.

View at Joybuy
TP-Link TL-PA4015P KIT powerline adapter set with Ethernet

TP-Link TL-PA4015P KIT powerline adapter set with Ethernet

A good fit for a fixed workspace where you want an Ethernet connection; test the connection using the sockets you plan to use.

The product description lists two adapters, Fast Ethernet (10/100 Mbit/s), 128-bit AES and a pass-through socket. The Ethernet ports are Fast Ethernet.

View at Joybuy

Frequently asked questions

Do I automatically need three adapters for backups across three floors?

No, the number depends on how many receiving locations you need. You’ll need one adapter by the router and one receiving adapter for each other location where you want to use powerline. A two-piece kit may be enough for one receiving location; you’ll usually need three adapters for two separate receiving locations. Check the contents of the exact pack.

Where should I plug in the adapters, and how do I assess the connection?

For a trial, plug the adapters directly into the wall sockets you plan to use, not into an extension lead or surge protector. Test the actual backup connection from your workspace. TP-Link notes that the quality of your electrical wiring and your appliances can affect powerline speeds.

Does a powerline adapter back up my work documents by itself?

No, a backup is a separate copy of your files, for example on a drive or in the cloud. Set up the backup process and protection for your work documents separately, and follow your employer’s policies where applicable.

What can I do if the connection is slow after installation?

First, try different wall sockets and keep the adapters away from electrical devices and power supplies that may cause interference. Then check the data transfer rate again for your own backup task; a higher stated model speed doesn’t prove that your home’s wiring will perform better.

Which Dutch rules apply to device safety and document protection?

Electrical and electronic devices placed on the market in the Netherlands must meet the applicable European product requirements. Ondernemersplein, the Dutch government’s business information portal, explains that after assessing conformity, the manufacturer applies the required CE marking. The manufacturer must also draw up the applicable EU declaration of conformity. Organisations that process personal data must put appropriate security measures in place based on risk, as explained by the Dutch Data Protection Authority. These requirements don’t determine which powerline model or backup method every home worker should choose.