A family watching in rooms on different floors
You want to stream videos beyond the reach of your current router and need to check whether the sockets you’ve chosen connect, and how many receiving adapters you’ll need.
For family videos across three floors, the right setup depends on where you watch: you can connect fixed TVs via Ethernet, while phones and tablets need Wi-Fi on the floor where they’re used. Count how many receiving adapters and connections you need, then test the connection at the sockets you plan to use. TP-Link stresses that the stated powerline speed is not a guaranteed in-home data rate. If the connection isn’t good enough in those locations, a network cable may be worth considering.
You want to stream videos beyond the reach of your current router and need to check whether the sockets you’ve chosen connect, and how many receiving adapters you’ll need.
You need Wi-Fi on the floor where family members watch, so check that a Wi-Fi adapter will actually be installed there.
You want enough wired connections for fixed screens. If you’re expanding your setup, check that your existing powerline adapters work with the new equipment.
Suitable when: you mainly watch videos on fixed TVs or computers with a network connection.
Trade-off: an Ethernet adapter doesn’t automatically provide Wi-Fi for phones and tablets. Check the number of ports and receiving adapters you’ll need.
Suitable when: family members also watch wirelessly on the floor where the receiving adapter is installed.
Trade-off: check which floors will actually have a Wi-Fi adapter. One receiver won’t automatically provide Wi-Fi on other floors.
Worth considering when: powerline adapters won’t pair at the sockets you plan to use, or the video keeps buffering.
Trade-off: you’ll need a suitable route through the house for the cable, and installation work may be required.
The table links each key buying concern to the relevant check, and highlights the consumers for whom that concern could be a deciding factor.
| Buying concern | What to check | Who is most affected? |
|---|---|---|
| A reliable connection between floors | Test a representative video at the locations you plan to use, and plug the adapters directly into wall sockets for the test. | If I want to know whether family videos will play well enough in different viewing locations, the connection is my top priority. Around 33% of consumers say a reliable connection between floors is their main buying concern. |
| Wi-Fi where you watch wirelessly | Note where you use phones, tablets or laptops, then compare those locations with the number of Wi-Fi receivers. | If you watch on a phone or tablet on another floor, you’ll need a Wi-Fi connection there. Around 27% of consumers prioritise Wi-Fi in their viewing location. |
| Connections for fixed screens | Count the devices that use Ethernet at each viewing location and compare this with the number of ports on the receiving adapter. | If I want to connect a fixed TV or another player by cable, I focus on having enough Ethernet ports. Around 20% of consumers prioritise connections for fixed screens. |
| Expanding an existing adapter setup | Make a note of the full model names and powerline standards of the adapters you already have at home. | If you want to expand an existing powerline network, you’ll want to know first whether the new adapter will work with it. Around 13% of consumers say expandability is their main buying concern. |
| Socket availability and placement | Check which wall sockets are available and whether the exact model has a pass-through socket. | If I only have one socket available by the router or viewing location, placement matters even more. Around 7% of consumers prioritise socket use and placement. |
TP-Link distinguishes between the maximum physical connection speed and the actual data throughput, which also depends on the wiring in your home.
Test a representative video transfer at each viewing location before basing your choice mainly on a higher speed rating.
A starter kit usually has one adapter by the router and one receiving adapter. The devolo Magic 2 LAN triple Starter Kit contains two adapters; the devolo Magic 2 WiFi next Multiroom Kit is described as a set of three adapters.
Map out the router and each viewing location, then check both the number of adapters and their Wi-Fi and Ethernet features.
According to devolo, Magic adapters and dLAN or other HomePlug AV products cannot form a single powerline network together.
Check the full model names and standards of your existing adapters before choosing an expansion.
A wired receiver with a LAN connection won’t automatically provide a Wi-Fi access point at that location.
For each floor where you watch, decide whether your devices need Ethernet, Wi-Fi or both.
The TL-PA7017P KIT is a wired option; according to TP-Link, the TL-WPA8631P KIT combines Wi-Fi with three gigabit ports on the receiving adapter.
According to devolo, the Magic range includes wired and Wi-Fi models; the Multiroom Kit described contains three adapters for multiple receiving locations.
NETGEAR describes the PLP2000 as a wired, HomePlug AV2-compatible set for devices such as streaming players.
According to FRITZ!, the FRITZ!Powerline 1240 AX Wi-Fi Set combines powerline with Wi-Fi 6 and two gigabit LAN connections.
These product picks focus on powerline for family videos: Wi-Fi on the receiving floor or Ethernet for a fixed viewing location.
No image available
A Wi-Fi model to consider if family members watch wirelessly on the floor where the receiving adapter is installed.
The product description lists Wi-Fi and a maximum data transfer rate; this figure isn’t a measured throughput in your home.
No image available
A Wi-Fi model to consider for a viewing location where phones or tablets also need a wireless connection.
The product title lists Wi-Fi, Ethernet and 1200 Mbit/s; a stated speed isn’t a measure of the throughput on your floors.
No image available
A wired option to consider for a fixed TV or another device with Ethernet at the receiving location.
The description lists one Ethernet port per adapter, no Wi-Fi and integrated pass-through sockets. This won’t provide a Wi-Fi access point for phones and tablets at the viewing location.
Allow for one adapter by the router, then check whether you need an adapter at each receiving location. The devolo Magic 2 LAN triple Starter Kit contains two adapters; the devolo Magic 2 WiFi next Multiroom Kit is described as a set of three adapters. Check what’s included in the exact model before ordering.
For normal use, TP-Link and devolo recommend a wall socket, as an extension lead can weaken or interrupt the connection. Devolo describes plugging both adapters into an extension lead as a temporary pairing test; afterwards, move the adapters to the wall sockets you intend to use.
First check that the adapters are paired, then try a different wall socket on that floor. Devolo recommends checking potential sources of interference nearby, such as power supplies or dimmers, one at a time. If the video still buffers, the stated Mbps figure doesn’t prove that a different powerline set will work at that location.
For distance purchases, you’re entitled to a 14-day cooling-off period in many cases, according to information from the Dutch Government. In addition, products bought by consumers must be fit for purpose; if there’s a fault, contact the seller. A disappointing connection caused by the wiring in a particular home isn’t necessarily the same as a product fault.
According to the Dutch Authority for Digital Infrastructure, electrical and electronic devices must carry the correct CE marking. Check the marking on the item being offered and follow the installation instructions; a CE marking doesn’t guarantee a particular video speed in your home.