First, choose a power bank with an output that matches your torch’s cable and charging port. That way, you can charge it without needing a mains socket at the time. If you want to charge the power bank while the torch is connected, check whether that exact model supports this feature. A higher mAh rating alone doesn’t guarantee a particular number of charges.
Who would find a power bank for a USB torch useful?
At home with few mains sockets
If you want to charge your torch while other devices need a mains socket, check the number of USB outputs and whether simultaneous charging is supported. Belkin, for example, lists multiple outputs for the BPB011btBK; this doesn’t automatically mean the model supports pass-through charging.
Using a torch on the go
If you want to top up your charge away from a mains socket, weigh the stated capacity against how easy it is to carry and which cable you need. The ANWB describes a USB-C rechargeable torch; check the connection on your own model.
Using a small USB torch
If a power bank switches off before your torch has finished charging, a low-current mode may help. Anker lists this mode for the Zolo A1688 and recommends checking support for each model.
What should you look for when buying?
Start with your torch’s connection and charging method. Then check for pass-through charging if you want to connect the power bank and torch at the same time, and compare capacity if you expect to be without a mains socket for a while.
| What to consider |
What should you check? |
Who is this most important for? |
| Few mains sockets |
Check whether the power bank supports pass-through charging with the connection you’ll use; multiple USB outputs don’t automatically mean it does. |
If there are few mains sockets at home, I want to top up my torch without using an extra socket. Around 36% of consumers rank this as their top buying priority. |
| Cable and connection |
Compare your torch’s charging port with the power bank’s output or built-in cable. |
I want to make sure the plug fits my torch before choosing a power bank. For around 29% of consumers, this compatibility is the top priority. |
| Power reserve |
Compare the stated capacity with how long you’ll be without a mains socket and how much extra size you’re happy to carry. |
If I can’t use a mains socket for a while, I want enough reserve to top up my torch. Around 21% of consumers name this reserve as their main buying priority. |
| Low charging current |
Check whether the exact power bank model has a low-current mode if your torch disconnects before it has finished charging. |
If my small torch won’t keep charging, I want to know whether a special mode could help prevent the problem. Around 14% of consumers put low-current charging first. |
Common mistakes when choosing
-
Assuming a high mAh rating means a set number of charges
The stated capacity doesn’t tell you directly how much energy your torch will actually receive. That also depends on the torch’s charging requirements and the energy lost during charging.
Use mAh to compare models, not as a promise of a particular number of charges. Take your own torch’s charging requirements into account.
-
Assuming multiple USB ports also mean pass-through charging
Having multiple outputs and being able to charge the power bank while a device is connected are two different features. Belkin lists pass-through charging for the BPB006; this doesn’t automatically apply to the BPB011btBK.
Check pass-through support for the exact model and connection you want to use.
-
Choosing a power bank with a fixed cable without checking your torch
A built-in cable is only useful if its plug fits your torch’s charging port.
Check your torch’s charging port and manual before relying on a fixed cable.
Brands to consider
Belkin
Belkin describes models with multiple separate USB outputs, as well as a separate range with integrated cables.
- According to Belkin, the BPB011btBK has two USB-A outputs and one USB-C output.
- Belkin’s listing of pass-through charging for the BPB006 doesn’t confirm that the BPB011btBK has this feature. Also check whether an integrated cable fits your torch’s charging port.
Anker
Anker lists a low-current mode for small devices on the Zolo A1688.
- According to Anker, the mode can be switched on for devices with low power consumption.
- Check support for the exact model. This feature alone doesn’t confirm that a particular torch will keep charging.
Xtorm
Xtorm’s product information for the FS5101U lists three outputs: two USB-C and one USB-A.
- This combination of connections may be useful if you want to connect another device as well as your torch.
- The listed ports don’t confirm pass-through charging or a low-current mode. Also check your torch’s cable and charging method.
Trust
Trust lists a capacity of 10.000 mAh and three outputs for the Primo 25029.
- The stated combination consists of two USB-A outputs and one USB-C output.
- Trust says that charging speed varies by device. The listed connections don’t confirm a special mode for a torch with low power consumption.
Power banks on Joybuy
These Joybuy products are power banks relevant to this topic. Check each model to make sure its connection and charging method suit your torch.
No image available
MOMAX 1-Power F.Pass+ Ultra-Slim Power Bank, 10.000 mAh
The built-in cable may be useful if it fits your torch’s charging port.
Stated capacity: 10.000 mAh. The product name mentions a built-in cable.
Joybuy
No image available
MOMAX Q.MAG Ultra-Slim Magnetic Power Bank, 5.000 mAh
Check that this power bank’s charging method suits your torch; the product name mentions wireless charging.
Stated capacity: 5.000 mAh. The product name mentions wireless charging.
Joybuy
No image available
CUKTECH Power Bank, 20.000 mAh, up to 40 W, with built-in Lightning and Type-C cables
The built-in cables may connect to a torch if the plug matches its charging port.
Stated capacity: 20.000 mAh. Maximum power according to the product name: 40 W. The product name mentions built-in Lightning and Type-C cables.
Joybuy
No image available
Power Bank, 10.000 mAh, 15 W, with wireless charging and magnetic phone stand
Check whether the charging method is suitable for your torch; the product name mentions wireless charging.
Stated capacity: 10.000 mAh. The product name mentions 15 W, wireless charging and a magnetic phone stand.
Joybuy
No image available
Power Bank, 10.000 mAh, with integrated USB-C cable and digital display, dark blue
The integrated USB-C cable may suit a torch with a compatible USB-C charging port.
Stated capacity: 10.000 mAh. The product name mentions 22,5 W, wireless charging up to 15 W, an integrated USB-C cable and a digital display.
Joybuy
Frequently asked questions
Can I charge my torch while the power bank is plugged into the only free mains socket?
Only if the chosen model supports pass-through charging with the connection you’re using. Belkin lists this feature for the BPB006; don’t assume it applies to other models, and follow the charging instructions for both devices.
Why does my small USB torch sometimes stop charging from a power bank?
One possible reason is that a power bank switches off when the current draw is low. Anker describes a dedicated mode for this, but recommends checking support for the exact model. Also check your torch’s cable and charging instructions.
How can I check whether a built-in cable will fit my torch?
Compare the plug with your torch’s charging port and check the manual. A built-in cable is only useful if the connection matches.
Does a higher mAh rating mean I can charge my torch more often?
Not necessarily. The stated capacity is a point of comparison, not a guarantee of a particular number of charges. Also take your torch’s charging requirements and the energy lost during charging into account.
How do I charge a power bank safely?
The Fire Service recommends following the manufacturer’s instructions, avoiding damaged cables and placing the charger in a clear space so heat can dissipate. Don’t charge devices under a pillow or duvet.
Where can I dispose of a worn-out power bank?
Milieu Centraal recommends taking small electrical appliances with a battery or plug to an electrical appliance collection point, not putting them in general waste. If the battery can be removed, take it separately to a battery collection point.