Who is this relevant to?

Users of an energy-efficient USB lamp

Your lamp needs USB power while in use and must not switch off unexpectedly when the load is low.

Anyone who needs light for longer

You want to estimate in advance how long your lamp can run without a mains socket, rather than relying on the mAh figure alone.

Anyone with a busy kitchen worktop

You need a suitable cable and a dry, practical place for the power bank near a worktop where it may get wet.

What should you look for when choosing?

First, check whether the lamp has its own battery or only stays lit when USB power is supplied. Then look at the connection, how it performs at low loads and the runtime you need.

What to consider What should you check? Who gives this more importance?
Continuous power Check whether the USB output stays on at low loads and whether any low-current mode lasts long enough. If my lamp only stays lit while USB power is flowing, I don’t want the output to switch off unexpectedly. Around 31% of consumers prioritise continuous power for an energy-efficient lamp.
Runtime Check the lamp’s power rating in W and the available energy in Wh; allow for conversion losses. I want to know whether the lamp will stay lit long enough between charges, not just how many mAh the power bank is rated for. Around 25% of consumers prioritise runtime.
Safe use Choose a dry spot, check the casing and read the warnings for the exact model. On a kitchen worktop, I want to be able to keep the power bank dry and avoid using a damaged one. Around 25% of consumers prioritise safe use on the worktop.
Connection Compare the lamp’s plug with the USB port and check whether the required cable is included. I want to connect the lamp using the right port and cable, without relying on an unsuitable connection. Around 19% of consumers prioritise a suitable USB connection.

Common mistakes

  • Assuming a high mAh rating guarantees a certain number of hours of light

    The capacity of the internal battery cells is not the same as the energy available from the USB output. Anker Support explains the difference between cell capacity and output capacity.

    Use your lamp’s power rating and the available energy in Wh to make a cautious estimate, and check that the output stays on.

  • Assuming a low-current mode will stay on indefinitely

    Anker Support says that the mode described switches off automatically after two hours without interaction, and notes that support varies by model.

    Check that the exact model supports the feature and how long it lasts, then test it with your lamp.

  • Using a wet or damaged power bank

    Brandweer Nederland identifies moisture, damage and short circuits as conditions that can lead to a fire.

    Keep the power bank in a dry place, away from spills, and don’t use it if it is damaged.

  • Treating a product title as conclusive proof of the model number

    A Joybuy page lists Trust 25028 in the title, but gives model 24678 in the specifications. This discrepancy makes it important to check the exact version.

    Before choosing a specific version, compare the full model number on the product with the manufacturer’s documentation and the product details.

Brands to consider

Trust

Trust provides product support documentation for products including the Primo Ultra-thin 25028.

  • Trust’s support documentation specifically names model 25028.
  • A Joybuy page lists 25028 in the title but 24678 in the specifications, so check the full model number.

Belkin

Belkin describes the BoostCharge BPB011btBK as a wired power bank with multiple outputs.

  • For the 10.000mAh version, Belkin Netherlands lists two USB-A outputs, one USB-C output and an included USB-A-to-USB-C cable.
  • Ports and an included cable do not, on their own, prove that the output stays on when powering a lamp with a low load.

Xtorm

Xtorm lists a capacity of 10.000mAh and multiple USB ports for the Fuel Series 5 FS5100.

  • According to Xtorm, the FS5100 has two USB-C ports and one USB-A port.
  • The listed port configuration and charging power ratings do not show that an output will provide continuous power to an energy-efficient lamp.

Anker

Anker Support describes a trickle-charging mode for devices with low power consumption.

  • For the mode described, Anker Support gives a minimum current threshold of 30–90mA.
  • Support varies by model; Anker Support also says the mode switches off automatically after two hours without interaction. A warning issued by the Netherlands Food and Consumer Product Safety Authority on 15 July 2025 applies specifically to models A1257, A1647, A1681 and A1689, not the brand as a whole.

Power banks at Joybuy

These Joybuy products are portable USB power sources, including a jump starter with a power bank function. Before using one with your lamp, check that the connection and cable are suitable and that the output stays on at low loads.

XBJ Power Bank 10.000mAh with integrated cables, black

XBJ Power Bank 10.000mAh 22.5W with integrated cables, black

The built-in cables may be suitable if one matches your lamp’s connection; also check that the output stays on at low power consumption.

The product information lists 10.000mAh, 22.5W and built-in USB-C and Lightning cables.

View at Joybuy
7000A 12V Jump Starter Power Bank, 26.800mAh

7000A 12V Jump Starter Power Bank, 26.800mAh

A relevant option if you also need a jump starter; for a lamp, the listed USB-C output is the main thing to consider.

The product title lists 26.800mAh and 12V; the product description gives a USB-C output of 10W.

View at Joybuy
XBJ T8 USB Power Bank, 10.000mAh, solar function, black

XBJ T8 USB Power Bank, 10.000mAh, solar function, black

Before using it with your lamp, check which USB connection it needs and whether the stated output is suitable.

The product title lists 10.000mAh and a solar function.

View at Joybuy
USB-C Power Bank 5.000mAh, 15W PD, pink

USB-C Power Bank 5.000mAh, 15W PD, pink

This connection is suitable only if your lamp’s cable has a USB-C connector; check which plug you need before choosing.

The product title lists 5.000mAh, USB-C and 15W PD.

View at Joybuy
Samsung Power Bank 20.000mAh, 45W, three USB-C ports, beige

Samsung Power Bank 20.000mAh, 45W, 3x USB-C, beige

The USB-C ports are suitable if your lamp’s cable fits them; the stated charging power does not prove that an energy-efficient lamp will keep the output active.

The product title lists 20.000mAh and three USB-C ports; the product description gives a maximum of 45W.

View at Joybuy

Frequently asked questions

Will a power bank charge my lamp or just keep it lit?

That depends on your lamp: a USB-powered lamp may only stay lit while connected to a power source. IKEA Netherlands’ product page describes the HÖSTULOTA as a lamp that lights up when connected to a power source; this doesn’t tell you whether your own lamp has a built-in battery.

How do I estimate how long my lamp will stay lit?

Use your lamp’s power rating in W and the power bank’s available energy in Wh to make an initial estimate. Allow for conversion losses: Anker Support explains that the mAh capacity of the internal battery cells is not the same as the capacity available from the USB output.

Can I charge the power bank while the lamp is connected?

Only if the exact model supports charging and supplying power at the same time. Consumentenbond lists pass-through charging as a feature to compare separately; don’t assume every power bank supports it.

What should I do if there’s a fault or a safety warning?

If a product breaks sooner than expected during normal use, ACM ConsuWijzer says the seller must put things right free of charge with a repair, replacement or refund. If there’s a safety warning, check the exact model number and follow the regulator’s advice; don’t use a model covered by the warning.