Who is this relevant to?

People with a rechargeable hand warmer

If you want to top up your hand warmer at your desk, first check which port and cable it uses, and whether it can heat up while charging. Ocoopa describes hand warmers where the on/off button doesn’t respond while the device is charging.

People who want warmth for longer

For longer use, the hand warmer’s power consumption, the energy available from the USB output and how you use it all matter. VARTA gives different capacity figures at 3.7 V and 5 V for one of its power bank models.

People using a shared desk

A tidy set-up means thinking about cables, leaving space for the power bank and following workplace rules. The Fire Service advises keeping charging equipment unobstructed and not using damaged cables.

What should you look for when buying?

First, check that the power bank is suitable for your hand warmer according to its instructions. Then work out how much energy reserve and how many connections you need at your desk.

What to consider What should you check? Who is this important for?
Connection and power Compare the hand warmer’s input and required voltage and current with the power bank’s output and cable. Also check that the port you choose supplies power. If I want to connect my hand warmer without guessing whether the port and cable are suitable, I check these details first; around 36% of consumers prioritise a suitable connection and power supply.
Energy reserve Check the hand warmer’s power consumption and how you use it. Compare energy in Wh or capacity at the same output voltage; don’t directly add together mAh figures measured at different voltages. If I want to use my hand warmer for much of the working day, I look at its energy requirements rather than just the mAh figure; around 29% of consumers prioritise the run time they need.
Safe use at a shared desk Check the casing, cable and instructions. Keep charging equipment unobstructed, don’t use damaged cables and follow workplace rules. The Fire Service gives this advice for chargers and batteries. If I share a charging set-up with others, I want to be able to keep cables and devices in good condition and unobstructed; around 21% of consumers prioritise safe use.
Practical desk set-up Check the number and type of outputs, where loose cables can go and whether the exact model switches off automatically at low power consumption. Anker says support for its low-current mode varies by model. If I want to keep my desk tidy and prevent a device from switching off, I check the connections and how the power bank works with my device’s power needs; around 14% of consumers prioritise a practical set-up.

Common mistakes

  • Assuming 10,000 mAh is the usable capacity at the USB output

    For type 57976, VARTA lists 10,000 mAh at 3.7 V and a rated capacity of 5,920 mAh at 5 V. These figures are based on different voltages.

    Compare figures measured at the same voltage or use Wh, and also check your hand warmer’s power consumption.

  • Assuming the hand warmer will heat up as soon as it’s connected to the power bank

    For some of the hand warmers described by Ocoopa, the on/off button may not respond while charging. So charging doesn’t automatically mean the device will provide heat at the same time.

    If you need your hand warmer to heat up while charging, check the instructions for the exact model.

  • Adding together the power ratings of several ports

    Belkin lists separate port outputs for model BPB011, but when all three ports are used, the combined maximum is 15 W.

    Check the combined output if you’re connecting a phone or another device as well as your hand warmer.

  • Assuming a similar product number means it’s the same version

    Trust product 24678 and the Joybuy listing for product 25028 have different product numbers. Without evidence that they’re identical versions, you can’t assume their specifications are interchangeable.

    Compare the full product number and the specifications of the version you’re considering.

Brands to consider

VARTA

The Energy Powerbank 10,000, type 57976, is a model worth comparing if you want to look at both connections and rated capacity at 5 V.

  • VARTA lists two USB-C outputs, one USB-A output and a rated capacity of 5,920 mAh at 5 V, as well as 10,000 mAh at 3.7 V.
  • These specifications don’t confirm the run time or compatibility with a hand warmer whose model hasn’t been specified.

Belkin

The BoostCharge BPB011btBK is worth comparing if you use USB-A connections or want to connect several devices.

  • Belkin Netherlands lists two USB-A ports, one USB-C port and a combined maximum of 15 W when all three ports are used.
  • The port specifications aren’t a test with a USB hand warmer; check the power requirements of the device you’re connecting.

Trust

The Primo Ultra-thin 10,000 mAh, product 24678, is an option to compare if you’re looking for USB-A and USB-C.

  • For product 24678, Trust lists two USB-A ports and one USB-C port.
  • Trust specifies up to 12 W via USB-A or 15 W via USB-C. Don’t assume Joybuy product 25028 is the same version without proof that they’re identical.

Xtorm

The Fuel Series 5 FS5100 is worth comparing if you want to consider two USB-C ports as well as USB-A.

  • Xtorm lists a 20 W USB-C PD output and a USB-A output for the FS5100.
  • The maximum power output alone doesn’t show whether the power bank is suitable for your hand warmer.

Anker

Anker is worth considering if you want to check whether a particular model has a mode for a low-power device.

  • Anker describes a Trickle Charging Mode on supported models.
  • Check the product page to see whether the specific model has this mode. It doesn’t confirm that the power bank will work with a hand warmer that needs more power to heat up.

Power banks on Joybuy

These power banks are worth comparing for a shared desk, for example if you want to connect other devices as well as a hand warmer. Always check your hand warmer’s required input, power supply and operating instructions.

4smarts Enterprise Compact Power Bank 122.5 W 20,000 mAh Space Grey

4smarts Enterprise Compact Power Bank, 20,000 mAh, 122.5 W

Compare this model if you want to connect other devices as well as your hand warmer, and its listed specifications suit the way you use it.

The product information lists 20,000 mAh, 122.5 W output, an LCD battery display, overheat protection and pass-through charging.

Joybuy
Samsung Power Bank Fast Charge 45 W, three USB-C ports, 20,000 mAh, beige

Samsung Power Bank Fast Charge, 20,000 mAh, 45 W, 3x USB-C, Beige

Compare this model if you want to connect several USB-C devices; check separately whether its output meets your hand warmer’s requirements.

The product information lists three USB-C ports, Power Delivery 3.0 and 20,000 mAh. The maximum output of 45 W applies when one device is connected; a USB-C cable is included.

Joybuy
Xlayer Power Bank Micro Black Edition, 20,000 mAh, two USB-A outputs, black

Xlayer Power Bank Micro Black Edition, 20,000 mAh, 74 Wh

Compare this model if you need USB-A outputs or want to connect two devices at once.

The product information lists 74 Wh and two USB-A outputs: one at 5 V/2.1 A and one at 5 V/1.0 A. It also says that two devices can be charged at the same time.

Joybuy
Baseus PicoGo Digital Display Power Bank, 10,000 mAh, 45 W, black

Baseus PicoGo Digital Display Power Bank, 10,000 mAh, 45 W

Compare this model if you want to consider both USB-C and USB-A, and check that the connection is suitable for your hand warmer.

The product information lists 10,000 mAh, up to 45 W when one device is connected, USB-C input and output, a USB-A port and a display showing the remaining battery percentage.

Joybuy
Anker Nano Power Bank, 5,000 mAh, USB-C, black

Anker Nano Power Bank, 5,000 mAh, USB-C, 100 g

Compare this compact model if you want to carry your power bank with you and its USB-C connection is suitable for your hand warmer.

The product information lists 5,000 mAh, one USB-C port, a total output of 22.5 W and a weight of 100 g.

Joybuy

Frequently asked questions

Can I use my hand warmer while it’s connected to the power bank?

It depends on the exact model; charging doesn’t automatically mean the hand warmer will provide heat at the same time. Ocoopa describes models where the on/off button doesn’t respond while charging. If you need it to heat up while charging, check the instructions for your hand warmer.

How can I check whether the power bank will last long enough?

Compare your hand warmer’s power consumption with the energy or rated capacity measured at the same voltage. For type 57976, VARTA lists 10,000 mAh at 3.7 V and 5,920 mAh at 5 V separately. Without knowing your hand warmer’s power consumption and how you use it, you can’t work out a specific run time from these figures.

How can I charge and position a power bank safely at a shared desk?

Follow the instructions, don’t use a damaged cable and keep charging equipment unobstructed so heat can escape. The Fire Service gives this advice for chargers and batteries; you should also follow your workplace rules.

What if the power bank I bought online isn’t suitable or is faulty?

Online consumer purchases generally come with a statutory 14-day cooling-off period after delivery, although there are exceptions. According to the Netherlands Authority for Consumers and Markets, the seller is responsible for the statutory guarantee if a product is faulty. The exact rules depend on the circumstances; the cooling-off period and statutory guarantee are separate rights.

Does a power bank for a USB hand warmer have to have USB-C?

The list published by the European Commission of devices covered by EU common charger rules doesn’t include power banks or USB hand warmers. So don’t use that list as proof that your power bank must have USB-C; choose a connection that matches your hand warmer’s instructions.