Who is this buying guide for?

Campers without access to mains power

If you’ll be on a campsite without a mains socket for several evenings, you’ll want to estimate how much energy your lamp needs. The Consumers’ Association (Consumentenbond) lists capacity as a point of comparison; Anker explains that energy lost during charging affects the capacity delivered.

Campers with a lamp and a phone

If you want to charge a phone as well as your lamp, it’s important to have compatible ports and enough total output for simultaneous charging. The Consumers’ Association discusses connections as a point of comparison; Belkin states that model BPB012btBK has a shared output limit when multiple ports are in use.

Campers with exposed kit

If your power bank will be somewhere it could be exposed to dust or splashes, compare the protection rating of the specific model with the conditions it will face. Xtorm lists an IP65 rating for the XR203; this specification does not automatically apply to other power banks.

What should you look for when choosing?

Start with your lamp’s energy consumption and how many evenings you want to cover. Then check that the cable, port and any low-current mode are suitable for your lamp. Only consider protection from dust or splashes if your camping setup calls for it.

What to consider What should you check? Who is this important for?
Energy reserve Compare your lamp’s energy consumption or charging information with the usable output capacity on a consistent voltage basis. Work out how many charges you need, and don’t treat mAh as a guaranteed number of lamp charges. If I’m camping for several evenings without a mains socket, I want to take enough energy for my lamp without carrying more capacity than I need. Around 40% of consumers prioritise having enough energy for several evenings.
Connections Compare your lamp’s input with the power bank’s port and cable. If you’re charging devices simultaneously, check the total output specification too. If I want to charge a phone as well as my lamp, I’ll look for compatible connectors and check how much power the power bank can deliver at the same time. Around 30% of consumers say connections for multiple devices are their top priority.
Low current draw Check whether your lamp needs a low-current mode and whether the manual for the specific power bank model lists this feature. Anker recommends checking the product information for the exact model. If my lamp draws very little charging current, I want to know whether the power bank will keep charging it rather than switching off automatically. Around 20% of consumers prioritise reliable charging for devices with a low current draw.
Exposure to the elements Check the IP rating of the specific model and what it covers. Also consider the weight; Xtorm lists the XR203 as weighing 506 g. If my power bank will be somewhere exposed, I want protection that suits the conditions I expect. Around 10% of consumers prioritise protection from dust or splashes.

Common pitfalls

  • Assuming mAh tells you exactly how many times you can charge your lamp

    The stated cell capacity is not the same as the energy your lamp receives through the USB output. Anker explains that energy is lost during charging because of inefficiencies in the cells and electronics.

    Compare your lamp’s specifications with the usable output energy on a consistent voltage basis, and allow for conversion losses.

  • Assuming a solar panel will fully recharge your power bank every day

    Xtorm describes the panel on its Go2 model as an additional emergency power source, rather than a primary charger. The amount of solar energy available depends on the conditions.

    Take your power bank with you fully charged and treat the panel as a possible extra reserve only.

  • Assuming a built-in USB-C cable will fit every lamp

    The built-in cable on UGREEN model 45762 is USB-C. If your lamp has a different input, you’ll need a suitable cable.

    Check the connectors on your lamp and power bank, and pack a separate cable if needed.

    You may need a separate, compatible cable if your lamp has a different connection.

Brands to consider

Xtorm

The XR203 is worth comparing if you’re looking for a power bank with model-specific protection for outdoor use.

  • Xtorm lists an IP65 rating, three USB outputs, a solar panel and a weight of 506 g for the XR203.
  • These specifications apply to the XR203. Having a solar panel does not guarantee enough solar energy at your campsite.

Belkin

The BoostCharge BPB012btBK is an example of a 20,000mAh model with several wired connections.

  • Belkin lists two USB-A ports and one USB-C port.
  • Belkin states a maximum total output of 15 W when all three ports are used together. Check your lamp’s cable too.

UGREEN

Model 45762 is a 20,000mAh version with an integrated USB-C cable.

  • UGREEN lists a 12.5 cm built-in USB-C cable.
  • If your lamp has a different connection, you’ll need a suitable separate cable.

Anker

Anker describes a low-current mode that you should check for on the specific power bank model.

  • A low-current mode can be useful for devices with a low current draw.
  • This feature is not confirmed for every Anker power bank; check the product information for the specific model.

Power banks on Joybuy

These power banks are options to compare for charging a USB camping lamp. Always check that the connection, charging specifications and conditions of use are suitable for your lamp and campsite.

4smarts Enterprise Compact Power Bank, 20,000 mAh, Space Grey

4smarts Enterprise Compact Power Bank 20,000 mAh, Space Grey

The stated capacity gives you a starting point for comparing it with your lamp’s energy needs.

Stated capacity: 20,000 mAh. Output: 122.5 W. Check that your lamp’s charging specifications are compatible with the output.

View on Joybuy
Samsung Power Bank Fast Charge 45W, 20,000 mAh, Beige

Samsung Power Bank Fast Charge 45W, 20,000 mAh, Beige

An option to compare if you want to charge other devices as well as your lamp; first, check that your lamp’s connection is compatible.

The title lists 20,000 mAh, 45 W and three USB-C connections. The product description lists an included USB-C cable and the ability to charge three devices at once.

View on Joybuy
Xlayer Power Bank Micro White, 20,000 mAh

Xlayer Power Bank Micro White, 20,000 mAh

The USB-A outputs may be useful if your lamp’s cable connects via USB-A; check the lamp’s connector and charging specifications.

Listed outputs: USB-A, 5 V/2.1 A and 5 V/1.0 A. The description also lists a USB-C input. According to the product description, this model is not water-resistant; keep it away from water and high humidity.

View on Joybuy
Anker Power Bank 20K, 87W, with built-in USB-C cable, black

Anker Power Bank (20K, 87W, Built-In USB-C Cable), black

Only compare this version if you can use the power bank in a dry indoor area at the campsite.

The title lists 20,000 mAh and a built-in USB-C cable; the description states a maximum total output of 87 W and the ability to charge three devices at once. According to the product description, this model is intended for indoor use in a dry environment only.

View on Joybuy

Frequently asked questions

Can I work out exactly how many full charges my lamp will get from the mAh rating on the packaging?

No. Compare your lamp’s specifications with the usable output capacity on a consistent voltage basis. Anker explains that conversion losses mean the cell capacity and the capacity delivered are different.

What should I do if my lamp stops charging after I connect it?

First, check the cable and port. If your lamp draws very little current, it may be switching off automatically; check the manual or product information for your power bank model to see whether it has a low-current mode. Anker Support EU recommends checking for this feature on each specific model.

How should I charge and store a power bank safely at the campsite?

Follow the instructions, don’t use damaged cables or chargers, and leave charging equipment in a clear space so heat can escape. Brandweer Nederland advises against leaving batteries in direct sunlight or extreme cold.

Is a CE marking an independent certification of a power bank’s performance?

No. CE marking is not an independent assessment of performance. According to the EU’s Your Europe website, CE marking is only required for products covered by EU rules that specifically require it; the manufacturer is responsible for ensuring the product meets the applicable requirements.

What should I check when charging several devices at once?

Check that the ports and cables are compatible with your devices, and read the total output specification for simultaneous charging. For example, Belkin lists a maximum total output of 15 W for model BPB012btBK when all three ports are used together.