Choose a power bank with an output and cable that match your bike light’s connector and charging instructions. If a small light stops charging before it’s fully charged, check whether your exact power bank model has a low-current mode. The Fire and Rescue Service advises charging devices on a hard surface and, ideally, staying nearby. Extra capacity or a higher maximum output alone doesn’t prove that a power bank is suitable for your light.
Who is this relevant to?
Charging beside the bed
You want to charge your bike light at home and are looking for a suitable place to do it: on a hard surface, away from the bed and ideally while you’re awake and nearby. This is in line with the Fire and Rescue Service’s charging advice.
Owner of a small USB light
You want to avoid the power bank stopping before your light is fully charged. Anker Support describes a low-current mode for the A1388 for devices with low power consumption; check whether your exact power bank model has this feature.
Cyclist taking a power bank along
You may also use your power bank on the go, so you’ll need to weigh portability against the available capacity. The Consumers’ Association lists portability as a factor when assessing power banks.
What should you look for when buying?
First check where you’ll charge the light and what connector it uses. Then check whether the power bank keeps charging when your light draws very little power.
| What to consider |
What to look for |
Who is this important for? |
| Safe charging |
Choose a hard surface away from the bed, and ideally charge while you’re awake and nearby. |
I want to charge my light at home without putting it on or in the bed. Around 36% of consumers say safe charging is their main concern. |
| Will the light keep charging? |
Check whether your exact power bank model has a low-current mode, and test the combination while keeping an eye on it. |
If my small light stops charging early, I want to know whether the power bank will keep charging. Around 29% of consumers prioritise reliable charging for small devices. |
| Connector and cable |
Compare the power bank’s output with your light’s connector, and check whether a suitable cable is included. |
I want to connect my light without having to improvise. Around 21% of consumers prioritise compatible connectors and cables. |
| Portability and capacity |
Compare the stated capacity, weight and dimensions; don’t work out the number of charges directly from the mAh figure. |
If I’m taking the power bank with me, I want to balance spare power with what’s comfortable to carry. Around 14% of consumers prioritise portability and spare power. |
Common pitfalls
-
Assuming it’s safe to charge with a power bank in bed
Using a power bank doesn’t mean you can ignore safe charging practices. The Fire and Rescue Service advises charging on a hard surface and, ideally, staying nearby.
While charging, keep the light and power bank out of bed and on a hard surface. Ideally, charge while you’re awake.
-
Looking only at the maximum wattage
A high maximum output doesn’t tell you whether a small light will keep charging. With some combinations, low power consumption can trigger automatic shut-off.
Check the manual for your exact power bank model to see if it has a low-current mode, then test it with your light while keeping an eye on it.
-
Assuming one cable fits every bike light
The connector on the light varies by model. An included cable will only work if its plug fits your light.
Check your light’s manual for its connector, then compare it with the cable and outputs on the power bank.
Brands to consider
Anker
A model to consider if you’re looking for a documented low-current charging mode for a small light.
- According to Anker’s manual, the A1388 has USB-A and USB-C outputs, as well as a low-current charging mode.
- Anker notes that support varies by model. Check the manual and test whether your light keeps charging with the power bank.
Trust
The Primo 25029 is one to consider if you want several USB connections.
- Trust lists the Primo 25029 as having a capacity of 10.000 mAh, two USB-A outputs and one USB-C output. According to Trust, the power bank can be recharged via USB-C or the included micro-USB cable.
- Check separately whether this exact model has a low-current mode; the port layout alone doesn’t tell you whether it does.
Belkin
According to Belkin, the BoostCharge BPB011btBK has USB-A and USB-C ports and comes with a cable.
- The included USB-A/USB-C cable may connect to your light if it uses USB-C.
- Check your light’s connector: an included cable won’t necessarily fit every model.
Xtorm
The NextGen XNG101W35 is also worth considering if you want to use the same power bank for devices with higher power requirements.
- Xtorm lists this model as having a capacity of 10.000 mAh, one USB-A port and two USB-C ports, with up to 35 W via USB-C.
- The maximum output doesn’t prove that the power bank is suitable for a particular bike light. Check the light’s connector and charging requirements.
Power banks at Joybuy
This selection includes power banks with different stated capacities and charging features. Check each model to make sure it has a suitable output and cable for your USB bike light.
No image available
10.000 mAh power bank with magnetic wireless charging, 15 W, pink
Check whether you can connect your bike light to an available output using a suitable cable; the wireless charging feature doesn’t tell you whether the light is compatible.
Stated capacity: 10.000 mAh.
Stated charging output: 15 W. The product name also mentions a magnetic phone stand.
View at Joybuy
No image available
10.000 mAh magnetic power bank, PD 22,5 W, pink and white
The product description lists a USB-C port; check that the connector and cable are suitable for your bike light.
Stated capacity: 10.000 mAh.
The product name lists PD 22,5 W, wireless charging and a foldable phone stand.
View at Joybuy
No image available
5.000 mAh power bank with built-in Lightning connector, white
The built-in Lightning connector only works with a device that has a compatible connection; check which connector your bike light requires.
Stated capacity: 5.000 mAh.
The product name lists PD 15 W, an LCD display and a phone stand.
View at Joybuy
No image available
5.000 mAh power bank with built-in Lightning connector, purple
The built-in Lightning connector only works with a device that has a compatible connection; check which connector your bike light requires.
Stated capacity: 5.000 mAh.
The product name lists PD 15 W, an LCD display and a phone stand.
View at Joybuy
Frequently asked questions
Can I charge my bike light on or in the bed overnight?
Don’t charge the light on or in the bed: the Fire and Rescue Service advises using a hard surface and, ideally, staying nearby while it charges. Using a power bank doesn’t change this advice.
Why does a power bank sometimes stop charging a small light?
Low power consumption can trigger automatic shut-off in some power banks. Anker Support describes a model-specific low-current charging mode for the A1388; check your model’s manual and test the combination while keeping an eye on it.
Which cable do I need for my bike light?
Check the connector and charging instructions for your exact light model, then compare them with the power bank’s outputs. For example, the manual for the Cateye TL-LD700-R/F describes a light with micro-USB; this doesn’t necessarily apply to other bike lights.