Who needs a power bank when camping?

Camper without access to mains power

You want to be able to top up your action camera over several days of filming. Weigh the energy reserve you need against the weight, and consider when you’ll be able to recharge the power bank itself. The Consumers’ Association (Consumentenbond) lists capacity and connections as factors to compare.

Camper on the move

If you’re carrying all your own kit, the power bank’s weight matters alongside the energy reserve you need. Nitecore lists the NB10000 Gen4 at 143 g; Xtorm lists the XR202 at 540 g.

Camper with a camera and phone

You may want to charge several devices or spare camera batteries. Check that the ports are suitable and how much power remains available when charging devices at the same time. For example, DJI specifies USB-C charging with PD or PPS for the Osmo Action 5 Pro.

What should you look for when choosing one?

Start with your camera’s charging requirements and how long it’ll be until you next have access to mains power. Then compare usable energy, weight, protection and the power available when you connect more than one device.

Concern What to look for when buying Who is this important for?
Enough energy between charging points Compare usable output energy or measurements taken on the same basis, and check when you’ll be able to recharge the power bank itself. If I’m going to be without mains power for several days, I want enough reserve to last until I can charge again. Around 33% of consumers prioritise having enough energy between charging points.
Connection and charging mode Check the required voltage, current, charging protocol and cable for your exact camera model. Also look at the total power available when charging devices at the same time. I want the output and cable to be suitable for my camera, rather than relying on a high wattage alone. Around 27% of consumers give camera compatibility top priority.
Carry weight Compare the stated weight and include any cables or other accessories you’ll need to carry yourself. If I’m walking with my kit, I don’t want to carry more weight than I need for charging. Around 20% of consumers prioritise lightweight camping gear.
Use in rain or damp conditions Check the protection rating and model-specific instructions. Charge in a suitable place with dry, undamaged connections. In wet camping weather, I want to be able to keep the charging area and connections dry, and know what protection the model I choose offers. Around 20% of consumers give use in wet weather top priority.

Common pitfalls

  • Dividing the stated mAh directly by the camera battery’s capacity

    Cell capacity and the energy available at the USB output are not the same. For example, Nitecore lists separate figures for the nominal capacity and output energy at 5 V for the NB10000 Gen4.

    Compare figures in Wh or on the same output basis. Treat any calculated number of charges as an estimate unless it’s based on a measurement.

  • Assuming the highest wattage guarantees faster camera charging

    Charging requirements vary by camera model. The total power may also be lower when several devices are connected than the maximum available from a single port.

    Check the voltage, current, charging protocol and cable your camera requires, and look at the power available when using multiple devices at the same time.

  • Relying on a built-in solar panel as your only charging plan

    According to ANWB, charging via solar power takes longer than usual with the Xtorm solar model it tested.

    If you’re going on a trip without access to mains power, take the energy you need with you or check which other charging option suits your situation.

  • Assuming an IP rating means you can use wet connections

    A protection rating applies to a specific model and doesn’t mean you can safely use wet connections. The Netherlands Fire Service (Brandweer Nederland) warns of the risks when batteries are exposed to moisture or damage.

    Follow the instructions and charge only in a suitable place with dry, undamaged connections.

Brands to compare

Nitecore

The NB10000 Gen4 is a lightweight option to compare if you’ll be carrying the power bank yourself.

  • Nitecore lists the NB10000 Gen4 at 143 g, with a 10,000 mAh equivalent, two USB-C outputs and an IPX7 rating.
  • The manufacturer lists a maximum of 22.5 W per output and 15 W in total when used simultaneously. Check that the connections and output energy suit your camera.

Xtorm

The XR202 is a robust 20,000mAh option. The Fuel Series 5 FS5201 offers multiple ports, but the XR202’s IP65 rating does not apply to it.

  • Xtorm lists the XR202 with an IP65 rating, four outputs and a weight of 540 g. For the FS5201, the brand lists two USB-C ports and one USB-A port.
  • Compare the protection and weight of the exact model. Don’t assume the XR202’s specifications also apply to the FS5201.

Anker

The Zolo Power Bank (10K, 30W) is a compact USB-C option if a larger energy reserve is less important.

  • Anker lists a capacity of 10,000 mAh and up to 30 W via USB-C for this model.
  • According to Anker, the combined maximum is 18 W when several devices are connected. The phone charging speeds quoted by the brand are based on its own tests, not measurements with an action camera.

UGREEN

The Nexode 20,000mAh/30W with three ports could be worth considering if you want to charge other USB devices as well as your camera.

  • UGREEN lists two USB-C ports, one USB-A port and a weight of 447 g for this model.
  • According to UGREEN, a 30W mains charger is not included. Check the combined power available for the devices you want to charge at the same time.

Belkin

The BoostCharge Pro BPB020btBK is a 20,000mAh option with three ports for anyone carrying other USB-C devices too.

  • Belkin lists up to 65 W through a single USB-C port, with charging via two USB-C ports and one USB-A port.
  • A single port’s maximum power isn’t, by itself, a reason to choose this model if you only have an action camera. Match the ports to the devices you’ll be carrying.

Joybuy products

Related products coming soon.

Frequently asked questions

How many times can I charge my action camera with a power bank?

You can’t reliably work this out from the nominal mAh figure alone. Compare the specifications for your exact camera with the power bank’s usable output energy, and allow for charging losses and any simultaneous use. Nitecore lists separate nominal and 5V output figures for the NB10000 Gen4.

How do I charge my camera and spare batteries when camping?

Use the charging mode and cable specified by the manufacturer for your camera model. DJI specifies USB-C charging for the Osmo Action 5 Pro and offers a separate multifunctional battery case for three batteries. This accessory is not intended as a universal solution for other cameras. Keep batteries and connections dry, and don’t use damaged cables.

Can a built-in solar panel replace charging from a mains socket?

Don’t assume it can: ANWB reports that charging via solar power takes longer than usual with the Xtorm solar model it tested, and also mentions charging via USB-C. Check the specifications and charging options for the model you’re considering.

Who can help if my power bank isn’t working properly?

According to the Dutch government, if a product is faulty, the retailer must provide a solution; you don’t have to rely solely on the manufacturer. The Netherlands does not have a fixed general statutory warranty period: what you can expect from a product depends, among other things, on the product and the information provided by the retailer.

What safety rules apply to a power bank sold in the Netherlands?

Consumer goods sold in the EU must comply with the applicable product safety rules. According to the European Union, CE marking is required only when the specific EU rules for that product say so; the marking is not, by itself, an independent safety certificate. Don’t use a battery that is damaged or has become wet as if it were safe.