Who is this guide for?

Teacher filming demonstrations

This teacher wants pupils to be able to follow their fingers, tools and the edges of the clay clearly. How the light falls on the work surface matters more than simply having a bright face.

Maker at a busy worktable

This maker shares table and floor space with others and wants a lighting set-up that leaves room to work without casting unwanted light elsewhere.

Teacher who moves between spaces

This teacher needs to move the light and its power supply between teaching spaces and wants to check that the battery, mount and run time are suitable for the lesson.

What should you look for when choosing?

Dimmable panel with desk clamp

A good fit if: you have a suitable table edge and don’t want stand legs beside your teaching space. Elgato says that a clamp is included with the Key Light Air MK.2.

Bear in mind: the stated maximum brightness of 2100 lumens depends on the power supply; Elgato specifies a suitable power supply of at least 30 W for full brightness.

Bi-colour LED panel on a stand

A good fit if: there’s room beside the table to position or move the light. According to NEEWER, the NEEWER NL660 two-light kit reviewed includes stands and diffusers.

Bear in mind: stand legs take up floor space, and the kit reviewed doesn’t include NP-F batteries. Also check what’s included with a standalone NL660.

COB light with softbox

A good fit if: you have room for a larger light modifier and want to position the light above your hands and the clay. According to amaran, the amaran 100x S has a Bowens mount.

Bear in mind: check that the softbox is compatible with the light and find out which components are included. If you’re recording a spoken lesson, also test whether the active cooling is audible.

Ring light

A good fit if: your camera or phone is positioned directly in front of the teacher and you want light around that filming position. The Godox LR150 manual mentions a phone holder and adjustable white light.

Bear in mind: take a test shot to see whether hands and the texture of the clay remain clear from the central position. The manual warns that the light must be kept dry.

Compact battery-powered light

A good fit if: you move between workspaces or want to add light to a small detail. Ulanzi lists a built-in battery and mounting options for the VL49 RGB.

Bear in mind: the stated 800 lux applies at 0.5 m and doesn’t show that one light will illuminate an entire teaching table. Compare the run time with the length of your lesson and the brightness setting you plan to use.

What to consider What to look for when buying Who is this important for?
Visibility of hands and details in the clay Check whether you can angle and dim the light; assess shadows and the edges of the clay in a test shot. If I want fingers, tools and the edges of the clay to remain recognisable during the demonstration, I focus on how the light falls from the camera angle. Around 36% of consumers prioritise being able to see the activity clearly.
Positioning the light without getting in the way Check the table edge, clamp height, space for stand legs, cable route and where the light falls on other workspaces. With people sharing the table and moving around me, I want to position a light without it getting in the way. Around 29% of consumers give shared workspace their highest priority.
Portability and power Compare the length of the lesson with the run time at your intended setting, and check which battery, adaptor or USB-C power supply is needed. If I move between spaces during a lesson, I want to know whether I can take the light with me and how to power it. Around 21% of consumers choose portability and power as their main consideration.
Consistent colour rendering Check the adjustable colour temperature and take a test shot using your camera settings and the existing workshop lighting. If I want to capture the colours of clay or glaze accurately, I check how they look under the lighting that’s actually available. Consistent colour rendering is a top priority for around 14% of consumers.

Common buying mistakes

  • Assuming a small battery-powered light is proven to illuminate the whole table

    The 800 lux stated by Ulanzi for the VL49 RGB applies at 0.5 m. That figure doesn’t show that the entire work surface will be well lit.

    Assess the whole table from your planned filming distance and, if needed, use a compact light as supplementary lighting.

    You may need additional lighting or a different mount to illuminate the whole work surface.

  • Confusing a standalone light with a complete kit

    What’s included can vary between versions, including stands and power supplies. The NEEWER two-light kit reviewed doesn’t include NP-F batteries; a USB-C port doesn’t automatically mean that a power adaptor is included.

    Compare the contents list for the exact version with the light, power supply and mount you’ll need in your teaching space.

    Depending on the version, you may need a suitable battery, power supply, stand or light modifier.

  • Looking only at brightness or CRI

    Stated light output depends on factors such as measuring distance, light modifier and, sometimes, the power supply. A CRI value alone doesn’t guarantee how the clay will look in the final camera footage.

    Only compare figures measured on the same basis, and take a test shot of the demonstration from your usual camera angle.

Brands to consider

NEEWER

The NL660 is a bi-colour panel for positionable task lighting; standalone lights and kits vary in what’s included.

  • According to NEEWER, the two-light kit reviewed includes two diffusers, barndoors and stands.
  • The manufacturer says that NP-F batteries are not included. The stated light output figures aren’t independent measurements taken on a pottery table.

Elgato

The Key Light Air MK.2 is a compact panel with a desk clamp for a suitable table edge.

  • Elgato says that a clamp is included and the light colour is adjustable.
  • The stated maximum of 2100 lumens depends on the power supply. Check that the clamp, table height and camera angle are suitable for your workspace.

amaran

The 100x S is a bi-colour COB light with a Bowens mount, designed to be used with a compatible light modifier.

  • amaran lists active cooling and a colour temperature range of 2700–6500 K.
  • Check that your chosen softbox and other accessories are compatible, and what’s included. If you’re recording spoken content, test whether the cooling is audible.

Ulanzi

The VL49 RGB is a compact battery-powered light for mobile filming or adding light to a small detail.

  • Ulanzi lists a 2000 mAh battery and several mounting options.
  • The stated illuminance applies at 0.5 m; assess separately whether the work surface gets enough light from your filming distance.

Godox

The LR150 is a ring light set-up for filming with a camera or phone in the centre.

  • The Godox manual mentions a phone holder and adjustable white light.
  • The manual warns that the light must be kept dry. Take a test shot to assess shadows on hands and clay.

Joybuy products for this set-up

This selection focuses mainly on compact, portable lighting and a ring light that clamps directly onto a smartphone. For each product, check that the mount and lighting range are suitable for your table and filming needs.

ULANZI VL49 RGB video light with 2000 mAh battery

ULANZI VL49 RGB video light, 2000 mAh

A compact light for portable fill lighting or illuminating a small detail.

The product name lists a 2000 mAh battery, dimmability, 2500 K–9500 K and a magnet on the back.

The product description warns against using it in the rain or in a high-humidity environment.

View at Joybuy
ULANZI 4-inch ring light for smartphone

ULANZI 4-inch Phone Ring Light

An option for filming on a smartphone, with the light clamped directly onto the phone.

The product name lists three colour temperatures from 3000 K–7000 K and five brightness settings.

Check that the clamp fits your smartphone.

View at Joybuy
Ulanzi LM001 Portable Mini Fill Light

Ulanzi LM001 Portable Mini Fill Light

A portable mini fill light for adding light when filming on the move.

The product description lists a 500 mAh battery, a magnetic base and a 1/4-inch thread.

View at Joybuy
Ulanzi SL03 Mini Camera Flash with Video Light

Ulanzi SL03 Mini Camera Flash with Video Light

For filming with a compatible camera; check that the connection suits your camera.

The product name lists GN8, 6500 K, a 90° adjustable head and four power settings.

The stated single-contact hot shoe is designed for Sony, Canon and Fuji DSLRs.

View at Joybuy
Ulanzi LM07 portable LED video light

Ulanzi LM07 Photography FlashLight

A portable light for anyone who wants to move their lighting between workspaces.

The product name lists 2000 K–5500 K, four brightness settings and a 2000 mAh battery. The product description mentions a zoom head for spot or flood lighting and a weight of around 187 g.

The product description says it can be used handheld; check that the mount you want is suitable for your set-up.

View at Joybuy

Frequently asked questions

How can you stop your hands casting shadows on the clay?

First, angle the light towards the work surface and take a test shot while using both hands. Change the direction or diffusion if tools or the edges of the clay disappear into shadow; the right position depends on the table and camera.

Can you replace a light on a stand with a desk clamp?

Yes, if the clamp, table height and camera angle are suitable for your workspace. For the Key Light Air MK.2, Elgato specifies a compatible table thickness of up to 6 cm; that doesn’t automatically apply to other clamps or tables.

Do you need to buy an NP-F battery or USB-C power supply separately?

It depends on the exact version. The NEEWER two-light kit reviewed doesn’t include NP-F batteries; for the Elgato Key Light Air MK.2’s stated maximum brightness, Elgato specifies a suitable power supply of at least 30 W. Check the contents list and power requirements for the model you choose.

Is a CE mark compulsory for an electrical video light?

According to the Netherlands Food and Consumer Product Safety Authority, CE marking is compulsory for electrical consumer products covered by the relevant product regulations. Check the marking on the exact version; a CE mark is the manufacturer’s declaration and, in itself, isn’t independent proof of testing.

What should you look for in a light for a shared workshop?

Check the mount, cable and power requirements before you start, and position the light so it doesn’t disturb others. Follow the product instructions; for example, the Godox LR150 manual warns that the light must be kept dry.