Start with the size you need in a single print: a photo-focused A3+ printer may suit you if A3+ is large enough, while an A1 poster calls for a model that supports A1. Then compare the space needed for the printer and paper feed with how often you print. For the occasional large poster, using a print service may also make sense. Canon, Epson and HP list different models and formats, but their specifications are not a ranking of print quality.
Who is this choice relevant to?
Student creating A1 exhibition posters
If your design needs to be displayed as one large poster, first check that the printer can handle the required size and paper. HP lists A1 support for the 2025 edition of the DesignJet T230; the precise paper options vary by model.
Student creating photo-focused A3+ posters
If your work fits within A3+, the paper type and image quality may be important factors. Epson lists borderless A3+ photo printing for the EcoTank ET-8550.
Occasional poster printer with limited space
If you only make a poster now and then, weigh up the space needed for a permanent printer, paper storage and maintenance against using a print service. The Consumentenbond notes that infrequent use of inkjet printers can increase the risk of printhead problems.
What should you consider when choosing?
Start with the finished size you need, then check whether paper handling, space and how often you print suit your room and your printing needs.
A3+ photo printer
A good fit if: your poster fits on A3+ and photo paper or borderless printing matters to you. Epson lists these options for the ET-8550.
Limitation: A3+ is not large enough for a single A1 print.
24-inch large-format printer
A good fit if: you need A1 or roll paper. Canon lists roll and sheet handling for the TC-21; HP lists A1 support and roll and sheet input for the 2025 edition of the DesignJet T230.
Limitation: allow extra space around the printer for paper feeding, output and storage.
A3 office printer
A good fit if: A3 is large enough and you’ll also use the printer for documents. Brother lists single-sided A3 printing for the MFC-J5955DW.
Limitation: this A3 option is no substitute for a printer that can produce a single A1 poster; scanning and copying on this Brother model are limited to A4.
Use a poster printing service
A good fit if: you only need large posters occasionally and don’t want to make room for a printer and paper storage. Student printing services list posters from a single copy, in sizes from A3 to A0.
Limitation: each order depends on submitting your artwork and scheduling the print.
| What to consider |
What should you check? |
Who should give this more weight? |
| Finished size |
Check the maximum size and supported paper feed for the exact version; HP lists A1 support for the 2025 edition of the DesignJet T230. |
If I need one A1 poster, I want to know it can be printed as a single sheet; around 33% of consumers put the required finished size first. |
| Use and maintenance |
Factor in how often you’ll print and any potential printhead maintenance when comparing owning a printer with using a print service. |
If I only make posters occasionally, I want to weigh the cost of ownership and maintenance against using a print service; around 27% of consumers prioritise the impact of infrequent use. |
| Image and paper |
Check the size, paper type, feed and any borderless printing requirements for the specific model. |
If my design fits on A3+, I want to take paper and image presentation into account; around 20% of consumers put this choice first. |
| Space |
Measure the space and allow for paper handling; Canon lists the TC-21’s printer dimensions as 968 × 533 × 245 mm. |
In a student room, I want to leave enough space for both the printer and the paper; around 20% of consumers prioritise space for setup and storage. |
Common mistakes
-
Treating A3, A3+ and A1 as interchangeable sizes
These models support different maximum sizes. An A3+ printer won’t meet the requirement for a single A1 poster.
Before comparing models, decide what size the poster needs to be as a single print, then check the specifications for the exact version.
-
Measuring only the printer itself
With sheet or roll feed, the paper also needs to be handled outside the printer. The stated dimensions don’t tell you how much working space the paper path needs.
Measure the space and check where paper is fed in, comes out and is stored.
-
Assuming refillable ink means maintenance-free printing
According to the Consumentenbond, infrequent use of inkjet printers can increase the risk of a blocked printhead.
Compare owning a printer with using a print service based on how often you actually print, and allow for potential maintenance.
After long gaps between print jobs, cleaning and maintenance can take extra time and use ink.
-
Assuming every compatible cartridge will work in the HP model reviewed
HP lists dynamic security for the 2025 edition of the DesignJet T230, which may block cartridges without an HP chip.
Check the cartridge requirements for the exact version before choosing replacement ink.
Brands and models to compare
Canon
The imagePROGRAF TC-21 is a 24-inch desktop option for roll and cut-sheet printing.
- Canon lists four pigment inks and dimensions of 968 × 533 × 245 mm for the TC-21.
- These are the dimensions of the printer itself, so allow extra space for paper and output.
Epson
The ET-8550 is a photo-focused A3+ option; the SC-T2100 is a separate 24-inch option for posters and more.
- Epson lists borderless A3+ photo printing and refillable ink tanks for the ET-8550. For the SC-T2100, Epson lists 24-inch rolls.
- The SC-T2100 handles cut sheets up to A3; the ET-8550’s A3+ specification does not apply to this model.
HP
The 2025 edition of the DesignJet T230 (5HB07D) is a 24-inch option that HP lists as supporting A1, with roll and sheet feed.
- HP lists an automatic horizontal cutter for this version.
- According to HP, dynamic security may block cartridges without an HP chip; check the cartridge requirements for this model.
Brother
The MFC-J5955DW is an A3 office printer to consider if you’ll also use it for documents.
- Brother lists single-sided A3 printing and scanning and copying up to A4.
- This model is not an option for printing a single A1 poster.
Joybuy products
Related products will be available soon.
Frequently asked questions
Do I need a printer that supports A1 for a single A1 exhibition poster?
Yes. If you need the poster as a single A1 print, check that the printer explicitly supports A1. HP lists A1 support for the 2025 edition of the DesignJet T230; Epson describes the ET-8550 as an A3+ photo printer.
What should I consider when setting up a printer in a student room?
Measure both the space for the printer and the room needed to handle paper. The stated dimensions of 968 × 533 × 245 mm for the Canon TC-21 refer to the printer itself; you’ll also need room to use the paper roll and the input and output areas.
What if I don’t print any posters for months?
According to the Consumentenbond, infrequent use of inkjet printers can increase the risk of a blocked printhead. Factor in potential maintenance when choosing, and compare the cost of an occasional print job with using a print service.
In the Netherlands, am I only entitled to the manufacturer’s guarantee?
No. ACM ConsuWijzer explains that your statutory rights exist alongside any manufacturer’s or retailer’s guarantee. If a product breaks sooner than you could reasonably expect when used normally, the retailer is responsible for providing an appropriate solution.