Who is this advice for?

Creator uploading large files

You send large portfolio files from a fixed workspace. Measure the speed there and at the router to make sure you’re not confusing your Wi-Fi speed with the speed of your internet connection.

Resident with weak Wi-Fi upstairs

Coverage is poor on another floor. The location of extra Wi-Fi access points and the connection between them are important factors to consider.

Renter without network cabling

You want Wi-Fi across multiple floors without running cables through your home. Wireless mesh may be an option, but placement and the connection between units still matter.

What should you look for when choosing?

Start by measuring your upload speed using a wired connection at the router, then compare it with the speed at your workspace. If the connection is also slow at the router, check the upload speed listed by your provider for your package before replacing your network equipment.

What to consider What to check before buying Who is this important for?
Reliable uploads Compare the wired upload speed at the router with the speed at your Wi-Fi workspace. If the wired connection is slow, check the speeds listed by your provider for your package. If I send large files from a fixed workspace, I want to know what is limiting the upload. Around 36% of consumers prioritise reliable uploads.
Coverage between floors Map out where the signal is weak and test possible locations for extra units. Check whether wired backhaul is an option; walls and ceilings can weaken Wi-Fi signals. If I need a usable connection upstairs, I focus on coverage and where to place each access point. Around 29% of consumers prioritise coverage on another floor.
Installation without cables Check whether there are power sockets in suitable locations and whether the units can still receive a usable signal there. Also check whether the system supports wired backhaul in future. If running cables isn’t practical, I want extra coverage without a network cable between floors. Around 21% of consumers prioritise this installation option.
Existing equipment Check whether an extender will work with your current router and which mesh features are available. Also compare the number of units in the chosen pack with your home’s layout. If my current router may still be suitable, I want to avoid replacing it unnecessarily. Around 14% of consumers prioritise keeping their existing setup.

Buying pitfalls

  • Assuming a high Wi-Fi speed on the box means fast uploads

    Your internet connection can limit upload speeds, even if the Wi-Fi specification is impressive. Wireless throughput can also vary due to obstacles and devices, among other factors, as TP-Link explains in its guide.

    First, measure your speed using a wired connection at the router, then check it at your workspace. This helps you avoid choosing a new system when the connection itself is the limiting factor.

  • Placing a wireless mesh unit where there’s barely any signal

    A wirelessly connected unit also needs a usable connection to the rest of the network. Floors and walls can weaken the signal.

    Try different locations and, where practical, choose a wired connection between access points. Bear in mind that you may need to move a unit or install cabling.

  • Mistaking an add-on for a complete system

    A repeater or extra unit isn’t automatically a complete solution for multiple floors. Some additional features may also require a paid subscription.

    Check how many units are in the pack and which features you actually want to use. According to the TP-Link guide, HomeShield has a free basic plan, while the Pro plan comes with a fee.

Brands to compare

TP-Link

Deco mesh systems are worth considering if you want to add Wi-Fi access points. The Deco X50 and Deco X50-PoE are different models.

  • TP-Link says Deco X50 units can connect wirelessly or via optional Ethernet backhaul. For the X50-PoE, the manufacturer lists PoE power and two 2.5Gbps ports.
  • These features alone don’t indicate how fast a portfolio upload will be on a particular floor. Also check which version you’re buying and how many units are included.

ASUS

The ZenWiFi XD5 is a mesh option for homes where you want to use multiple Wi-Fi access points.

  • ASUS describes Ethernet backhaul as an option when Ethernet ports or network cables are available between locations.
  • The benefit of wired backhaul described by ASUS doesn’t apply if you can’t use a suitable cable connection. The manufacturer’s information isn’t an independent speed test.

FRITZ!

The FRITZ!Repeater 3000 AX is an option for extending coverage if you want to keep your existing router, particularly a FRITZ!Box.

  • FRITZ! lists two Gigabit LAN ports and a LAN connection to a FRITZ!Box. The manufacturer also says the device can be used with other modem routers.
  • A standalone repeater isn’t a complete system for every floor. If you have a router from another brand, check separately whether the mesh features you want are available.

Joybuy products for Wi-Fi across multiple floors

These product picks include mesh kits with multiple Wi-Fi access points, offering wireless and wired options depending on the model. Check that the exact version has the required CE marking and meets the applicable requirements: the Dutch Authority for Digital Infrastructure states that equipment must carry the required CE marking. The strengthened digital security requirements apply to equipment placed on the European market from 1 August 2025.

TP-Link Deco BE68 mesh kit, 2-pack

TP-Link Deco BE68 (2-pack)

A mesh kit for connecting multiple floors and wiring a computer to one of the units.

Tri-band Wi-Fi 7. According to the product description, each unit has 10, 2.5 and 1 Gbps ports.

The description lists both wireless and wired backhaul.

View at Joybuy
TP-Link Deco X50 mesh kit, 3-pack

TP-Link Deco X50 (3-pack)

Three mesh units may suit a home where you want to test Wi-Fi coverage on different floors.

Wi-Fi 6 (802.11ax), dual-band (2.4 GHz and 5 GHz) and, according to the product description, three Gigabit Ethernet ports per unit.

TP-Link describes the Deco X50 as supporting wireless connections and optional Ethernet backhaul.

View at Joybuy
TP-Link Deco X50-PoE mesh kit, 2-pack

TP-Link Deco X50-PoE (2-pack)

A mesh kit for anyone looking to use two extra access points and power the units via PoE-compatible equipment and cabling.

Wi-Fi 6 (802.11ax), dual-band (2.4 GHz and 5 GHz) and two Ethernet ports per unit.

PoE requires compatible PoE equipment and cabling.

View at Joybuy
TP-Link Deco XE75 Pro mesh kit, 3-pack

TP-Link Deco XE75 Pro (3-pack)

This three-unit mesh kit is an option for testing coverage in different parts of your home.

Tri-band Wi-Fi 6E (802.11ax), with 2.4GHz, 5GHz and 6GHz bands. The product description lists three Gigabit Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50-PoE mesh kit, 3-pack

TP-Link Deco X50-PoE (3-pack)

Three mesh units give you several places to test Wi-Fi on different floors, but the connection between the units remains important.

Wi-Fi 6 (802.11ax), dual-band (2.4 GHz and 5 GHz), PoE and two Ethernet ports per unit.

PoE requires compatible PoE equipment and cabling.

View at Joybuy

Frequently asked questions

How can I tell whether a new router will make my portfolio uploads faster?

Compare your upload speed using a network cable at the router with your speed over Wi-Fi at your workspace. If the wired upload is also slow, check the minimum, normally available and maximum upload speeds listed by your provider for your fixed broadband package. An extra Wi-Fi access point won’t increase the speed of your internet connection.

Where should I place an extra Wi-Fi access point?

Try locations where you need coverage and check that a wirelessly connected access point can still get a usable connection there. Walls and ceilings can weaken the signal. If you have a network cable, check whether your chosen model supports Ethernet backhaul.

Can I use my own router with my Dutch internet provider?

According to ACM ConsuWijzer, you’re free to choose your router, but a provider may refuse a device, for example if it’s unsafe. Check with your provider how to connect and set up your own equipment, and keep the device up to date.

Do I need a permit or registration for standard Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used without a permit, notification or registration, provided you meet the specified conditions. Follow the applicable requirements and instructions; the device must carry the required CE marking.

What ongoing costs or service details should I check?

Check whether the security features you want require a paid subscription and whether the manufacturer provides updates for the exact version. According to the TP-Link guide, HomeShield has a free basic plan, while the Pro plan comes with a fee.