Who is this relevant to?

Portfolio creator with weak Wi-Fi at the end of the hallway

Your connection works near the router but drops out at your workspace. Overstappen.nl describes poor internet coverage in a room as a common frustration, so first check whether the problem is mainly in that location.

Creator uploading large files

You want to find out whether your internet connection or Wi-Fi is slowing down your uploads. ACM ConsuWijzer recommends measuring the speed over a wired connection, as close as possible to the connection point.

Resident who can’t run a cable

You’re looking for extra Wi-Fi coverage without installing new cabling. The position of the extra point matters, as it still needs a connection to your existing Wi-Fi network.

What should you look for in a Wi-Fi solution for your portfolio?

Start by measuring the connection over a cable at the connection point, then compare it with Wi-Fi at your workspace. Only then decide between a new router, an extra access point or mesh. The right choice depends on where the upload is slowing down and whether you can run a cable.

What to consider What should you check? Who is this important for?
Wi-Fi at your workspace Test the connection where you upload files. Check whether the system you’re considering supports extra Wi-Fi points and whether a usable connection is possible there. I want to upload files at the end of the hallway without the connection dropping out at my workspace. Around 31% of consumers prioritise Wi-Fi coverage in that location.
Upload speed of your internet connection Compare wired measurements at the connection point with Wi-Fi measurements at your workspace, and check the upload speed in your internet contract. I want to know whether my large files are uploading slowly because of my internet connection or Wi-Fi. Around 31% of consumers prioritise the upload speed of their connection.
Connection between Wi-Fi points Check whether the exact model supports Ethernet backhaul or LAN bridge mode, and what cables, ports or power supply it requires. I want to know in advance whether I can run a cable or will have to rely on a wireless connection between the points. Around 23% of consumers base their choice mainly on whether a cable can be used.
Compatibility with existing equipment Check which router or access point modes are available, and ask your provider about the connection settings if necessary. I want to keep my existing equipment if possible and avoid unnecessary changes to my network. Around 15% of consumers prioritise compatibility with existing equipment and straightforward management.

Common buying mistakes

  • Assuming a high Wi-Fi speed means a fast portfolio upload

    The advertised Wi-Fi speed isn’t the same as the upload speed of your internet connection. A new router won’t automatically fix a slow connection.

    First, measure the speed over a wired connection at the connection point, then test Wi-Fi at your workspace. Only compare measurements taken under similar conditions.

  • Placing a wireless extra point where the Wi-Fi is already weak

    A wireless mesh point or repeater also needs to maintain a connection to the router or another point. Placing it somewhere with barely any signal is therefore not a proven way to solve your upload problem.

    Decide in advance where the point will be able to connect. If you can run a cable, check whether the device supports Ethernet backhaul or LAN bridge mode.

  • Confusing different models or hardware versions

    The Deco X50 and Deco X50-PoE are different models. Port specifications for the X50-PoE may also vary between documentation or hardware versions.

    Before buying, check the full model name, hardware version, ports, power supply and what’s included for the version you want to order.

Brands to consider for your Wi-Fi setup

TP-Link

TP-Link describes the Deco X50 as a mesh system with optional Ethernet backhaul. The Deco X50-PoE is a separate model with different mounting and power options.

  • The manufacturer lists a wired connection between Deco X50 units as an option.
  • For the X50-PoE, check the hardware version and port configuration of the specific version.

ASUS

ASUS describes the ZenWiFi XD5 as a Wi-Fi 6 mesh range with Ethernet backhaul support.

  • A wired connection between the points is an option if Ethernet is available.
  • The manufacturer’s speed claims apply to compatible devices, and it notes regional restrictions for 160 MHz. This doesn’t tell you what upload speed you’ll get in your hallway.

FRITZ!

According to FRITZ!, the FRITZ!Repeater 1200 AX can be used as an extra access point via LAN bridge mode behind a router from another brand.

  • A separate access point could be a good fit if you want to keep your existing router and have a network cable available.
  • Integration with shared mesh settings is specifically described for use with a compatible FRITZ!Box.

NETGEAR

For certain Orbi systems, NETGEAR describes both wireless and wired backhaul: the connection between the router and satellites.

  • The systems described offer a choice between a wireless connection and Ethernet backhaul.
  • Check which satellites and ports are listed for the exact system. The setup described doesn’t tell you what upload speed you’ll get at home.

Joybuy products for extra Wi-Fi coverage and mesh

These products include mesh systems and a wired access point for situations where you want Wi-Fi in more places. Before buying, check that the specific version meets the applicable CE and radio equipment requirements, as well as the digital security requirements in force since 1 August 2025. The Dutch Authority for Digital Infrastructure sets out these requirements for radio equipment.

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4 Wi-Fi 7

Worth considering if you’re looking for a mesh system with a wired connection between the points.

Wi-Fi 7 (802.11be); dual-band on 2.4 GHz and 5 GHz. The product description mentions adding mesh points and wired backhaul.

View at Joybuy
TP-Link Deco X50 mesh system with three units

TP-Link Deco X50 (3-pack)

Worth considering if you want Wi-Fi in several places and can use Ethernet between the units.

Wi-Fi 6 (802.11ax); three units and three gigabit ports per unit. TP-Link lists Ethernet backhaul for the Deco X50; this requires Ethernet cabling between the units.

View at Joybuy
TP-Link EAP725-Wall access point

TP-Link EAP725-Wall

Worth considering if you want to keep your existing router and can connect a wired access point near your workspace.

The product description mentions wall or ceiling mounting, three Ethernet ports and PoE power. The installation described requires a compatible PoE power supply.

View at Joybuy
TP-Link Deco XE75 mesh system with three units

TP-Link Deco XE75 (3 units)

Worth considering if you’re looking for a mesh kit to provide Wi-Fi in several places.

Tri-band Wi-Fi 6E (802.11ax) on 2.4 GHz, 5 GHz and 6 GHz; the product description lists three units and three gigabit ports per unit.

View at Joybuy
TP-Link Deco X50-PoE mesh system with three units

TP-Link Deco X50-PoE (3-pack)

Worth considering if you want to install several mesh points and have PoE cabling available.

Wi-Fi 6 (802.11ax); the product description lists three units and PoE support. Check the hardware version and port configuration of the version on offer, as documentation for the X50-PoE varies on these details.

View at Joybuy

Frequently asked questions

How can I tell whether Wi-Fi or my internet connection is slowing down my portfolio upload?

First, measure the speed over a wired connection as close as possible to the connection point, then compare it with a Wi-Fi measurement at your workspace. Also check the upload speed in your contract. A disappointing wired measurement is a reason to investigate your connection or provider. If it’s mainly the Wi-Fi at the end of the hallway that’s unreliable, look at your Wi-Fi setup.

Can I use an extra Wi-Fi point without replacing my provider’s router?

Yes, if the extra device has a suitable access point or LAN bridge mode and can be connected correctly. For example, FRITZ! describes using the FRITZ!Repeater 1200 AX in LAN bridge mode behind a router from another brand. Check the mode and connections on the version you choose.

Will a wireless mesh point work without a network cable?

A wireless mesh point can connect without a cable, but it still needs a usable connection to the router or another point at the location you choose. Test the proposed location first; don’t simply put the point somewhere the Wi-Fi barely works.

What product requirements should I check in the Netherlands?

For the specific version, check that it meets the applicable radio equipment and CE marking requirements. According to the Dutch Authority for Digital Infrastructure, relevant digital security requirements have also applied since 1 August 2025. A model name alone doesn’t confirm that a particular version meets the requirements.

Can I use my own router in the Netherlands?

Yes. ACM ConsuWijzer explains that you have the freedom to choose your router, but a provider can refuse a customer’s own device under certain conditions if it doesn’t meet the same security requirements. You may also need your provider’s settings to connect it. Check both the terms of your connection and the settings your new router requires.