Who is this relevant to?

Presenter who listens back to recordings

You’re practising clear speech and the transition between two languages, and want to assess your voice during or after a long take. A headset that lets you speak and listen may suit you; the best sound for your voice is something to judge with a test recording of your own.

Speaker with long practice sessions

You prioritise a comfortable fit and a stable microphone position over repeated takes. Manufacturers describe adjustable or padded designs, but only trying a headset on will tell you whether it feels comfortable.

Speaker starting out on a computer

You want to practise without a separate recording interface, so you’ll need a compatible computer port. A USB-A call headset is one possible connection; that alone doesn’t prove it’s better for podcast recording.

What should you look for when choosing?

Start with the connections and whether you need to record and monitor at the same time. Then consider fit and microphone position for long takes.

Wired USB-A call headset

A good fit if: you want to practise on a PC or Mac with USB-A, without a separate recording interface; Logitech describes the H540 as plug-and-play.

Trade-off: Logitech positions this model for calls. Make a test recording before deciding whether it’s suitable for recording.

Over-ear headset with a 3.5mm connection

A good fit if: you want to speak and listen at the same time through a compatible headset connection. RØDE also positions the NTH-100M for podcasting and describes a splitter for separate 3.5mm ports.

Trade-off: for the connection to an XLR microphone input described by RØDE, you’ll need a suitable adapter that provides plug-in power.

Broadcast headset with separate plugs

A good fit if: your recording equipment has a compatible microphone input and headphone output. According to the manufacturer, the Audio-Technica BPHS1 has an XLR microphone plug and a 6.3mm headphone plug.

Trade-off: this doesn’t connect directly via USB; check that both plugs are compatible with your equipment.

Separate headworn microphone

A good fit if: you already have another way to monitor audio and mainly want a microphone that moves with your head.

Trade-off: the Shure SM35 isn’t a pair of headphones; wireless use requires a compatible bodypack, while a wired setup needs a suitable preamp and connection solution.

What to consider What should you check? Who should give this more weight?
Clear speech Check whether the microphone is adjustable and make a test recording in both languages, including words with p and b sounds. If you want to assess slips and sounds between takes, clarity comes first. Around 33% of consumers give this the highest priority.
Comfort during long takes Consider the headband, ear cushions and microphone position; if possible, try the headset during a session of a similar length. If you record several takes in a row, a fit that stays comfortable for you matters. Around 27% of consumers place the greatest importance on comfort.
Connection and monitoring Make a note of the ports on your computer, mixer or interface, and check the microphone input, headphone output and any power requirements. If you want to monitor audio while recording, check that both signals can connect to your equipment. Around 20% of consumers put connection and monitoring first.
Getting started with a complete setup Check what’s included and whether you’ll need another cable, adapter or separate interface. If you want to practise without a lot of setup, a simple, complete connection may be important. Around 20% of consumers give this the highest priority.

Common buying mistakes

  • Assuming a plug that fits will work for recording

    A plug that fits physically doesn’t confirm that the microphone and headphones will work with your equipment. The BPHS1 has separate microphone and headphone plugs; for an XLR microphone input, RØDE describes an adapter for the NTH-100M that provides plug-in power.

    Compare the headset’s exact outputs with your device’s inputs, and check for any power requirements before buying.

  • Not checking the connection cable

    beyerdynamic states that DT 297 variants are supplied without a connection cable. Without a compatible cable, you can’t connect the headset directly to the connection you intend to use.

    Check what’s included with the variant you’ve chosen and what connections any separately purchased cable needs to have.

    For a DT 297 variant, you’ll need to order your preferred connection cable separately.

  • Equating call noise reduction with podcast recording quality

    A headset described for computer use or calls hasn’t necessarily been compared for its recording quality when used for a bilingual intro.

    Make a test recording in your own space and listen to both languages before deciding whether the voice reproduction meets your needs.

Brands worth considering

RØDE

The NTH-100M is an over-ear headset with a microphone, which RØDE also positions for podcasting.

  • RØDE describes an adjustable fit and microphone positioning designed to help reduce plosives. The brand also describes a splitter for devices with separate 3.5mm ports.
  • For an XLR microphone input, RØDE describes a suitable adapter that provides plug-in power. These are manufacturer specifications, not an independent sound comparison.

Audio-Technica

The BPHS1 is a broadcast headset for a setup with separate recording and listening connections.

  • Audio-Technica specifies a dynamic cardioid boom microphone, closed-back over-ear ear cups and a replaceable cable.
  • The specified cable ends in XLR and 6.3mm plugs, not USB. This doesn’t prove a comparative recording advantage.

Logitech

The H540 is a USB-A computer headset; the Zone Wired is another USB range that Logitech targets at business calls.

  • Logitech describes the H540 as having an adjustable microphone and on-earcup controls. For the Zone Wired, the brand mentions microphone noise cancellation and adjustable sidetone.
  • The call uses described aren’t an independent podcast test or a comparison of voice recordings.

beyerdynamic

The DT 297 PV MK II is a wired broadcast option for a setup where the connections have been established in advance.

  • beyerdynamic specifies an adjustable cardioid condenser microphone and replaceable ear cushions.
  • According to beyerdynamic, DT 297 variants are supplied without a connection cable; check the variant you choose and order a compatible cable separately if needed.

Shure

The SM35 is a headworn microphone for anyone who already has a separate way to monitor audio.

  • Shure recommends positioning the microphone beside the corner of your mouth, rather than directly in front of it, to help reduce plosives.
  • The SM35 isn’t a headset; the wireless setup described uses a compatible bodypack, while wired use requires a suitable preamp solution.

Joybuy products to consider

These Joybuy products offer a range of headset and microphone setups for speech practice. For each model, check that the stated microphone and connection work with your recording and listening setup.

Sennheiser MOMENTUM 4 Wireless Black

Sennheiser MOMENTUM 4 Wireless Black

The product description mentions four microphones for calls; check whether the connection you need works with your recording and listening setup.

According to the description, the headphones can be used via Bluetooth or a 3.5mm audio cable.

View at Joybuy
Jabra Evolve2 30 SE headset

Jabra Evolve2 30 SE

The stated USB-A connection may suit a computer setup with that port; check that this variant works with your recording equipment.

The product description mentions two integrated microphones, stereo speakers and compatibility with Windows and Mac.

View at Joybuy
HyperX Cloud III S Wireless Gaming Headset

HyperX Cloud III S Wireless Gaming Headset

The detachable boom microphone makes this model worth considering for speech practice; test the recording with your own equipment.

The description mentions volume and mute controls, along with a memory foam headband and ear cushions.

View at Joybuy
Jabra Evolve2 65 USB-A Black MS Mono

Jabra Evolve2 65 USB-A Black MS Mono

The product description mentions a microphone and a USB-A Bluetooth adapter; check whether this wireless connection works with your recording and listening setup.

The description lists Bluetooth 5.0, 40mm speakers and a stated playback time of up to 37 hours.

View at Joybuy
Trust Ayda wired headset with USB-A

Trust Ayda wired USB-A headset

The USB connections described may suit a computer setup; check which port and microphone function your recording software uses.

The product description mentions USB-A and USB-C, an adjustable headband, breathable ear cushions and a microphone mute function.

View at Joybuy

Frequently asked questions

Does a headset need special support for two languages?

The product specifications listed don’t point to a language-specific setting or a proven advantage for any particular language combination. Record a short section in both languages and check that your words, volume and plosives sound clear.

How can I reduce plosives while practising?

For the SM35, Shure recommends positioning the microphone beside the corner of your mouth, rather than directly in front of it. Use this as a starting point for a test recording, but don’t assume every microphone boom can be adjusted in the same way.

Can I connect any headset directly to a mixer?

No, connections vary between headsets and mixers. Audio-Technica specifies separate XLR and 6.3mm plugs for the BPHS1; for the NTH-100M, RØDE describes a splitter and, for an XLR microphone input, a suitable adapter that provides plug-in power. Check the inputs on your equipment.

What if a headset I bought online doesn’t fit or breaks soon after?

According to ACM ConsuWijzer, the cancellation period ends 14 days after the product is delivered; statutory exceptions may apply. Your statutory guarantee also depends on what you could reasonably expect from the product under normal use. A stated manufacturer’s warranty period doesn’t, on its own, determine how long that statutory right applies.