Who is this choice relevant to?

Recording in a noisy classroom

You want the piano to remain audible without underestimating the room acoustics and background noise. A test recording and carefully chosen position can help you assess the balance, as described by Bax Music and Shure.

Recording a one-off performance

You want to make a stereo recording quickly and independently, without first setting up a computer and separate microphones.

Fine-tuning the piano sound

You want to position the microphones precisely and can use extra channels, cables and set-up time to tailor the recording to the instrument and room. Shure and RØDE describe stereo configurations using separately positioned microphones.

What should you consider when choosing?

Standalone stereo recorder

Choose this if: you want to record quickly without a computer and have a suitable place to position the recorder.

Bear in mind: the recorder’s position determines both the balance of the piano and how much sound from the room is captured.

One separate X/Y stereo microphone

Choose this if: you already have a compatible recording device and want to use one positionable stereo microphone.

Bear in mind: you’ll need to match the connection, cable and power supply to your recording device.

Two separate condenser microphones

Choose this if: you want to adjust the positions for the lower and higher notes separately and have two suitable recording channels.

Bear in mind: this set-up requires more equipment and time to assemble. Also check how the recording sounds in mono.

Bax Music explains how distance affects the balance between the direct piano sound and the room. Shure points out that a stereo pair can cause phase cancellation when played back in mono, so assess the set-up with a test recording.

What to consider What to look for Who this matters most to
Balance between the piano and the room Compare a position closer to the piano with one further away. Listen to see whether background noise overpowers the piano. If I’m recording in a noisy room, I want to hear how much piano comes through compared with the background noise; around 40% of consumers prioritise this balance between the piano and room noise.
Quick, standalone recording Check standalone recording, the storage medium and the power supply. Also test in advance that you can play the recording back. For a performance, I want to be able to start quickly without a computer and make a stereo recording on my own; around 30% of consumers prioritise this simple recording set-up.
Stereo balance of the piano Make a test recording with your chosen set-up and listen to it in mono too. Shure warns that phase cancellation can occur. If I want to balance the lower and higher notes of the piano separately, I want to be able to adjust the microphone positions; around 20% of consumers prioritise this stereo balance over a quick set-up.
Adding microphones later Compare the number of simultaneous channels, connections and phantom power with the microphones you want to use. If I want to connect separate microphones later, I want to know now whether the recorder has enough inputs and power; around 10% of consumers prioritise this option to expand their set-up.

Pitfalls when buying equipment for piano recordings

  • Putting the recorder at the back of the room without making a test recording

    Distance and positioning affect the balance between the piano and the sound of the room. Choosing a position without testing it can therefore produce a different balance of sound from the one you’re looking for.

    Before the performance, make a recording from the intended position and play it back. If necessary, move the recorder or microphone and compare the results.

  • Assuming a stereo pair can record on its own

    The RØDE NT5 is a set of microphones, not a recorder. According to RØDE, each NT5 needs an XLR connection and P48 phantom power.

    Check that your recording device has two suitable channels and provides the required power, and find out which cables and stands or mounts you’ll need.

    As well as the stereo pair, this set-up requires a suitable recorder or interface, cables and a stable position.

  • Assuming recording for internal use and sharing publicly are the same

    Privacy rules may apply when people are recognisable. Rights may also apply to protected repertoire and performances.

    Agree the purpose of the recording, how it will be stored and whether it may be shared with the school in advance. Check the applicable legal basis for processing and any rights separately.

Brands to consider

Zoom

The H1essential is a standalone stereo recorder with built-in X/Y microphones. The H4essential adds two XLR/TRS inputs for external microphones.

  • According to Zoom, both the H1essential and H4essential support 32-bit float recording.
  • The H1essential doesn’t have the two XLR/TRS inputs that Zoom lists for the H4essential. Choose based on the microphone set-up you want.

Tascam

The DR-40XP combines adjustable stereo microphones with two XLR/TRS inputs and phantom power. It could suit you if you want to start recording independently and use external microphones later.

  • Tascam lists built-in adjustable microphones and external inputs with phantom power.
  • Tascam reports that some DR-40XP units with serial numbers 2630001 to 2642004 may have timekeeping or battery-life issues. Check the serial number of the unit in question.

RØDE

The NT5 matched pair is a stereo pair for anyone who wants to position two small condenser microphones separately around an acoustic piano.

  • RØDE says the microphones are selected as a matched pair for stereo recording.
  • According to RØDE, each NT5 needs P48 phantom power via XLR; the microphones cannot record on their own.

Audio-Technica

The AT8022 is a single X/Y stereo microphone for anyone who already has a suitable recording device and doesn’t want to set up two separate microphones.

  • Audio-Technica lists power via an AA battery or phantom power, as well as cables for different inputs.
  • The microphone combines the capsules in one position. Check the connection on your recording device and consider whether you need to position the microphones separately.

Joybuy products

Related products will be available soon.

Frequently asked questions

Where should you position a microphone for an acoustic piano?

Start with a test recording by the piano, then move the set-up while listening back. According to Bax Music’s recording tips, a closer position gives a more direct sound, while greater distance can capture more of the room. The best position varies between an upright piano and a grand piano, so don’t treat any one distance as a fixed rule.

Do you need any other equipment for a RØDE NT5 stereo pair?

Yes. According to RØDE, each NT5 needs an XLR connection and P48 phantom power. Before buying, check that you have two suitable recording channels, the required power, cables and a stable set-up.

Does 32-bit float recording fix echo or background noise?

No. The recording format doesn’t change microphone positioning or remove distracting room noise. So use a test recording to assess the balance between the piano and the room, even if your recorder supports 32-bit float.

What should you check when recording at school if pupils are recognisable?

If the school processes personal data about recognisable pupils, it must have a valid legal basis under the GDPR and inform pupils and parents, according to the Dutch Data Protection Authority. Its guidance on consent for recognisable images does not automatically apply in the same way to every sound recording. Agree the purpose of the recording, how it will be stored and whether it may be shared with the school.

Can you publish a recording of protected repertoire without permission?

Don’t assume that you can. The Dutch Government distinguishes between a private copy for personal use and distributing or making protected music available to the public. Performers’ work may also be protected by related rights. Before publishing, check which rights and permissions you need for the piece and the performance.