Who is this choice relevant to?

Piano mixer with a small desk

Wants to fit two speakers around a fixed listening position without large cabinets getting in the way of a symmetrical stereo setup. Genelec stresses the importance of symmetrical placement.

Piano mixer who listens at low volume

Works in a quiet room and wants to find out whether audible hiss is coming from the active monitors or is originating further along the audio chain. Genelec notes that self-noise can be audible at a short listening distance in a quiet room.

Piano mixer checking the bass

Wants to assess the balance of lower piano notes, taking into account the measurement conditions behind the specifications and the effect of the room.

What should you look for when choosing?

When mixing piano in a quiet study, your choice mainly comes down to finding a suitable stereo setup, checking the bass, listening at low volume and making sure the connections work with your existing equipment.

What to consider What to look for when buying Who is this important to?
Piano balance and bass Compare frequency limits only when the stated dB condition is also given, and assess the bass balance from your intended listening position. If I want to assess lower piano notes reliably, I look at both the specification and the room. Around 31% of customers prioritise piano balance and bass.
Placement and stereo imaging Measure the space on the left and right, and check that both speakers can be positioned at the same height and angled towards your listening position. If my desk has limited space, I still want to be able to position a symmetrical stereo pair. Around 25% of customers say placement is their main constraint.
Hiss at low volume If possible, listen from your usual working position without playing music, both with and without an audio source connected; the source or cables could also be causing noise. In a quiet room, I want to know whether hiss is audible from my listening distance and whether it’s coming from the monitor or the signal chain. Around 25% of customers prioritise quiet performance at low volume.
Connections and stereo pair Compare the outputs on your computer or audio interface with the inputs on the exact model, and check whether the package contains one monitor or a pair. If I want to use my existing equipment, I need compatible connections and two speakers. Around 19% of customers prioritise connectivity and a complete stereo pair.

Common buying mistakes

  • Comparing frequency limits without checking the dB condition

    The Yamaha HS5 is specified from 54 Hz at −10 dB, while ADAM Audio lists 45 Hz at −6 dB for the T5V. These figures aren’t directly comparable on their own when it comes to piano bass.

    Note the measurement condition for each specification, then assess how your room affects the low frequencies at your listening position.

  • Assuming one active monitor is a stereo pair

    Yamaha lists the HS5 as packaged individually, while the PreSonus Eris 3.5 2nd Gen mentioned here is sold as a pair.

    Before buying, check the pack size and the connections on the exact model.

    For a stereo pair of monitors sold individually, you’ll need a second monitor and may also need suitable cables or connection equipment.

  • Seeing room correction or a larger woofer as a substitute for good placement

    Your listening position, symmetry and reflections all affect what you hear. Measurement-based correction also has its own equipment requirements.

    Plan your stereo setup first, then decide whether additional correction would suit your fixed listening position.

    Measurement-based correction may require additional measuring equipment and a suitable audio interface.

Brands to consider

Kali Audio

The LP-UNF is designed for desktop mixing, while the LP-6 V2 is part of a larger product range.

  • Kali says the LP-UNF has USB-C, analogue inputs and settings for different desk positions.
  • Kali’s comparison of a lower noise floor is between the LP-6 V2 and the original LP-6; it isn’t a comparison with other brands or a noise figure for the LP-UNF.

Genelec

The compact 8010A is a standalone monitor for setups where space for two speakers is limited.

  • Genelec specifies a width of 121 mm, one analogue XLR input and a lower limit of 67 Hz at −6 dB for the 8010A.
  • Genelec’s general information about low self-noise isn’t a model-specific measurement of the 8010A.

Yamaha

The HS5 is a standalone active nearfield monitor with analogue connections and ROOM CONTROL.

  • Yamaha specifies XLR and TRS connections and states that the HS5 is packaged individually.
  • The stated lower limit is 54 Hz at −10 dB and 74 Hz at −3 dB; keep the measurement conditions in mind when comparing figures.

ADAM Audio

The T5V is a 5-inch nearfield monitor for setups with room for two separate cabinets.

  • ADAM Audio specifies a rear-facing bass-reflex port and 45 Hz at −6 dB.
  • This manufacturer’s figure alone can’t predict how the bass will sound from a specific listening position, and it isn’t directly comparable with a limit specified at −10 dB.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue stereo set.

  • PreSonus offers this model as a pair, with TRS, RCA and 3.5 mm inputs, plus a headphone output on the front.
  • PreSonus specifies a frequency range starting at 80 Hz, which is worth bearing in mind if you want to assess deep piano bass.

Neumann

The KH 80 DSP is an option for a fixed setup where measurement-based correction is required.

  • Neumann says the KH 80 DSP is compatible with MA 1.
  • MA 1 requires, among other things, a measurement microphone, a computer and a suitable audio interface, so correction isn’t available from the speakers alone.

Joybuy products

Related products coming soon.

Frequently asked questions

Where should you place your monitors for reliable stereo imaging?

Genelec recommends starting with a symmetrical setup, with you at the tip of an equilateral triangle and both monitors aimed towards your listening position. Reflections and the exact positioning still have an effect.

What should you check if you hear a hiss when no music is playing?

Listen from your usual working position and check whether the noise is still there with no audio source connected. Genelec distinguishes between self-noise from active speakers and noise coming in via the source or cables; a general statement isn’t a measurement of the model you’re buying.

Do you need to buy a subwoofer straight away for piano?

No, a subwoofer isn’t automatically necessary. First work out which low notes you can’t assess well enough with your current setup and how the room affects them. Manufacturer frequency-limit figures also use different measurement conditions.

How can you avoid disturbing others when mixing at home?

Be considerate of those around you and, if noise is an issue, agree arrangements with your neighbours. The Dutch government advises trying to agree on arrangements together first, such as the times when music can be played.