Piano mixer with few mains sockets
You mix existing recordings and want to listen without an extra power adapter for the interface. Check the power available from your computer port and whether the headphone and monitor outputs suit your setup.
If you’re only mixing existing piano recordings, first check whether your current headphone or speaker connection does the job; an interface is most useful when you need different connections or controls. To make new stereo recordings of your piano’s analogue sound, you’ll need two audio inputs that can be used at the same time, as well as compatible outputs on your piano. USB power can save you a mains socket for the interface, but check that your computer port can supply enough power: Focusrite says the Scarlett 2i2 4th Gen can use an optional 5V power supply if the computer doesn’t provide enough USB power.
You mix existing recordings and want to listen without an extra power adapter for the interface. Check the power available from your computer port and whether the headphone and monitor outputs suit your setup.
You want to record both the left and right channels of an analogue piano output at the same time, then mix them. First check which audio outputs your piano has; Audient says the EVO 4 can link its two inputs for stereo recording.
You may need two audio inputs and physical MIDI connections, as well as a headphone output. MOTU and PreSonus list MIDI in and out on the M2 and Studio 24c respectively; check that these connections are compatible with your instruments.
With few mains sockets, USB power is only one part of the decision. Also consider whether you’re mixing existing tracks or want to record your piano again.
| What matters | What to look for | Who is this relevant to? |
|---|---|---|
| Power without an extra mains socket | Check the power requirements of the exact model and the capacity of your computer port or hub. | If I have few mains sockets, I want to know whether my computer can power the interface; around 33% of consumers prioritise avoiding an extra mains socket. |
| Headphones and monitors | Check the headphone connector, how many listening routes you need and the connections on your monitors. | When mixing existing tracks, I want to listen to them properly through my own headphones or monitors; around 27% of consumers give listening connections top priority. |
| Recording a piano in stereo | Check whether your piano has left and right audio outputs and whether the interface can use two compatible inputs at the same time. | If I want to record the piano’s analogue sound in stereo, I need two audio inputs that work at the same time; around 27% of consumers prioritise this recording requirement. |
| MIDI and computer connections | Check whether your instrument uses physical MIDI connections, USB-MIDI or USB audio, and whether that connection is compatible with your computer. | If I want to connect an instrument as well as audio equipment, the MIDI and computer connections need to work with my setup; around 13% of consumers prioritise these extra connections. |
Bus-powered interfaces draw power from the computer, but the amount available depends on the connection and the device. Focusrite says the Scarlett 2i2 4th Gen has an optional 5V connection for use when the computer doesn’t provide enough USB power.
Before you buy, compare the exact model’s power requirements with what your computer port or hub can supply.
A USB connection on a piano doesn’t always transmit the piano’s sound. Roland says the USB connection on the GO:PIANO88 (GO-88P) transfers MIDI data, not audio.
Check your piano’s manual separately for USB audio, MIDI and analogue audio outputs.
If your piano doesn’t transmit USB audio, recording its own sound may require a suitable audio connection and interface.
MOTU says the RCA outputs on the M2 are mirrored, so they don’t automatically provide a second, independent monitor mix. Arturia specifies a maximum of 250 mA at 5 V for the MiniFuse 2’s USB hub port.
Check whether you need to use outputs independently and how much power a connected USB device requires.
Equipment that draws more power may need a separately powered hub or another connection solution.
The Scarlett 2i2 4th Gen is a useful reference if you want headphone and monitor outputs alongside two inputs.
According to MOTU, the M2 is a bus-powered interface with two combination inputs and physical MIDI in and out.
According to Audient, the EVO 4 is USB-powered and has two inputs that can be linked for stereo recording.
According to PreSonus, the Studio 24c is a bus-powered interface with two microphone, instrument or line inputs, plus MIDI in and out.
According to Arturia, the MiniFuse 2 combines two inputs and MIDI in and out with a USB-A hub port.
Not necessarily. First check whether your current audio output and listening equipment meet your needs. An interface is most useful if you need different physical connections, controls or inputs for new recordings.
It depends on the piano model. Roland says USB on the GO:PIANO88 (GO-88P) transfers MIDI only, not audio; don’t assume the same applies to other pianos.
Check that your piano has suitable left and right audio outputs, then connect them to two compatible inputs. In your recording software, assign them as a stereo pair. Audient also describes a linked gain setting for both inputs on the EVO 4.
Check that the computer port, cable and any hub meet the power requirements of the exact model. Focusrite says the Scarlett 2i2 4th Gen has an optional 5V connection if the computer doesn’t provide enough USB power; you may need an additional power solution in that case.
For eligible distance purchases from a business, the Dutch government generally provides a 14-day cooling-off period, although exceptions may apply. The Dutch government also explains your rights with the seller if a product is faulty.