For an even reproduction of an etching, two similar light sources on either side are a sensible starting point. To show the plate mark or paper texture, take a separate shot with a single light positioned low. National Museums Scotland explains how low-angle light brings out texture, while the Canadian Conservation Institute recommends two light sources at around 45 degrees for even illumination. Measure the space around your table and check that the light, softbox, mount, stand and power supply will all fit.
Who is this set-up for?
Anyone making a flat reproduction of an etching
You want to capture the whole print as evenly as possible and need room on both sides of your small table for lights. National Museums Scotland and the Canadian Conservation Institute describe lighting set-ups for photographing objects evenly.
Photographers capturing the plate mark and paper
You want to show the relief or surface as well as make a standard reproduction. National Museums Scotland explains how low-angle light reveals texture through shadows and highlights.
Photographers with limited table space
You need to position the light, stand and any reflector around a small table. A set-up with fewer components may be more practical than a complete two-light kit.
What should you consider when choosing?
When photographing an etching on a small table, the main considerations are even reproduction, visible texture, colour and the space available for your set-up.
Two similar softbox lights
Suitable when: you want an even reproduction and have room on both sides of the table to position the lights roughly symmetrically.
Trade-off: two lights and stands take up more space; symmetrical lighting can reduce the appearance of relief.
One softbox with a white reflector
Suitable when: you only have space on one side, or want to start with fewer components.
Trade-off: a reflector fills in shadows less symmetrically than a second light.
Adjustable light with a separate softbox
Suitable when: you want to make a separate shot of the plate mark or paper texture as well as an even reproduction.
Trade-off: you’ll need to check that the softbox fits the light head; low-angle light can also emphasise imperfections.
| Consideration |
What to look for |
Who is this important for? |
| Even lighting |
Check whether two similar light sources with stands will fit on either side and can be positioned independently. |
I want to capture the whole print evenly, without major differences between the edges. Around 33% of consumers prioritise even reproduction. |
| Visible texture |
Check whether one light can be positioned low and at a different angle; a reflector can fill in overly dark shadows. |
I want to show the plate mark or paper texture in a separate shot. Around 25% of consumers prioritise showing texture. |
| Paper and ink colour |
Check the stated colour rendering and colour temperature of the exact light variant. Otherwise, switch off coloured ambient lighting and assess a test shot. |
I want to capture paper and ink colours as consistently as possible. Colour control is the main purchase consideration for around 25% of consumers. |
| Space and kit contents |
Compare the dimensions and included components with the available space; check the mount, stand, power supply and cable routing. |
I need to fit the light and any stands around a small table. Around 17% of consumers prioritise limited set-up space. |
Common pitfalls
-
Assuming a separate light head is a complete softbox kit
A Bowens mount describes a fitting, not which components are included in the box.
Check the parts list for the exact variant and make sure the softbox you choose fits the light head.
Depending on the light head and kit contents you choose, you may still need a compatible softbox, stand, second light or power supply.
-
Taking only an even shot when you want to show the plate mark
Two symmetrical light sources can reduce shadows on the surface, making the relief less visible.
To show texture, take a separate shot with a single light positioned lower down. Use a white reflector if shadows make details difficult to see.
-
Assuming an EU product page confirms that a product is suitable for the Dutch mains supply
The European product page for the NEEWER NK200 states 220 V; Netbeheer Nederland gives the Dutch mains supply as 230 V and 50 Hz. This information alone does not confirm that a specific supplied variant is suitable.
Ask someone to check the permitted input voltage and plug for the exact light variant. Business.gov.nl explains that electrical equipment must meet the applicable requirements and that the manufacturer affixes the required CE marking once conformity has been established.
Relevant brands
The brands below are useful references for complete kits, separate light heads or compact lights; the features listed apply to specific models.
Bresser
According to Bresser, the BR-225B (F004490) is a kit with two 50 × 70 cm softboxes and two stands, for anyone looking for a two-light set-up.
- Bresser lists two 50 W LED lights, 5500 K and CRI >85.
- Two stands take up space. The stated CRI is a manufacturer’s specification, not an independent colour test.
Godox
According to Godox, the SL60IID and SL60IIBi are separate adjustable light heads with Bowens mounts. You can use them to build your own compatible softbox set-up.
- Godox lists 5600 ± 200 K for the SL60IID and an adjustable range of 2800 to 6500 K for the SL60IIBi. The brand lists CRI ≥96 for both models.
- A separate light head is not a complete softbox kit; check which components are included with the exact variant.
Nanlite
The FS-60B is a bi-colour light head for which Nanlite lists a Bowens adapter; this may be useful if you’re putting a set-up together yourself.
- The manual lists 2700–6500 K, an average CRI of 96 and an AC 100–240 V, 50/60 Hz power supply.
- Check that your chosen softbox fits the mount and what’s included with the exact variant; these specifications don’t describe a complete photography set-up.
SmallRig
SmallRig describes the RC 60B as a portable light, making it worth considering if space and portability are important.
- SmallRig lists a built-in battery and an adjustable colour temperature of 2700–6500 K.
- Check which light modifier and power supply are included with the exact variant; a portable light isn’t automatically a softbox kit.
NEEWER
The European product page for the NK200 describes a kit with two 60 × 60 cm softboxes, E27 fittings and stands.
- The listed kit contents may be useful if you’d rather choose all the components together.
- The page states 220 V for the light, while Netbeheer Nederland gives the Dutch mains supply as 230 V and 50 Hz. Before choosing it, check the exact EU variant supplied, its plug and its suitability for the mains supply.
Products for lighting etchings on Joybuy
Related products will be available soon.
Frequently asked questions
How should you set up the lighting for both a standard photo and a photo of the plate mark?
For even lighting, start with two lights positioned roughly symmetrically at around 45 degrees. Then, if you like, take a separate shot with a single light positioned low to show the relief; use a white reflector if shadows make details difficult to see.
Should you leave the ambient lights on?
For an LED set-up, National Museums Scotland recommends switching off other ceiling lights to reduce colour mixing. Then check the colour balance in a test shot.
How can you handle a delicate etching with care?
Handle the paper as little as possible and don’t leave it under the light unnecessarily. The Canadian Conservation Institute warns that natural and artificial light can damage paper and some colourants; sensitivity depends on the materials used.
What should you check when buying an electric light in the Netherlands?
Electrical equipment placed on the market in the Netherlands must meet the applicable European requirements; Business.gov.nl states that the manufacturer affixes the required CE marking once conformity has been established. A light plugged into a Dutch socket must be suitable for 230 V and 50 Hz. This doesn’t confirm that a specific model or supplied variant meets all the requirements.
What are your rights if a light you bought online isn’t working properly?
If a product is faulty, contact the seller; the product must meet the legal requirements. For distance purchases, you generally have a 14-day cooling-off period, subject to legal exceptions. The Dutch government states that there is no fixed statutory warranty period covering all products in the Netherlands.