Who is this choice relevant to?

Group with large technical drawings

Needs clear drawings and cross-sections on larger paper, so starts by working out the required finished size. HP lists support for up to A1 for the DesignJet T250; Epson positions the SC-T2100 for technical drawings up to 24 inches.

Group creating image-rich presentations

Primarily prints renders, photos and presentation boards, and wants to match the paper and colour reproduction to the images. Epson and Canon describe A3+ photo printers with support for different photo media.

Group that often prints multiple copies

Regularly prepares prints for meetings and needs to consider ink, paper and shared management as well as the initial purchase. Epson specifies refillable ink tanks for the ET-8550; its stated photo yield does not indicate how many architectural sheets it can print.

What should you consider when choosing?

Start with the largest size that needs to be legible on a single sheet. Then decide whether image-rich presentation prints, frequent printing or shared use is the priority.

Technical large-format printer

Choose this option: if plans, cross-sections or CAD drawings on A1 are the main job. HP lists support from A4 to A1 for the DesignJet T250; Epson’s SC-T2100 is designed for technical drawings up to 24 inches.

Keep in mind: check the media and workspace required for each model. These size specifications don’t tell you whether photo prints on your chosen paper will be comparable to those from a photo printer.

A3+ photo printer with pigment ink

Choose this option: if image-rich studies on A3+ and a choice of photo media are your priorities. Canon lists ten individual pigment inks and support for several photo media types for the imagePROGRAF PRO-310.

Keep in mind: A3+ is no substitute for an A1 plan, and the number of inks on its own isn’t an independent measure of quality.

A3+ photo printer with refillable tanks

Choose this option: if your group regularly produces A3+ images and smaller prints, and refillable bottles suit the way you work. Epson specifies A3+ paper input and print, copy and scan functions for the ET-8550.

Keep in mind: Epson’s stated photo yield is based on the conditions for those photos. It doesn’t show how many A3+ architecture studies one set of bottles can produce.

Printing service

Choose this option: if your group only needs large presentation prints occasionally and doesn’t want to buy, store and maintain its own printer. Printerpro says large-format photos can be ordered from a single copy.

Keep in mind: file submission, paper choice, delivery time and costs depend on the job. A service won’t give you the same immediate access as having your own printer.

What to consider What to look for when buying Who is this important for?
Size and legibility Decide on the largest required finished size; check support for sheets and rolls. If our group needs plans on large paper, the required size comes before photo features. Around 31% of consumers prioritise size.
Images and paper Check the required paper size and type, and the paper feed; if possible, print a sample of one of your own studies. If we print renders and presentation boards, we want to know whether the paper suits the images. Around 25% of consumers prioritise images and paper.
Frequent printing Work out ink and paper costs based on your own quantities and sizes; don’t use a yield for small photos as a guide to A3+ yield. If we print multiple copies for meetings, consumables matter as well as the initial purchase. Around 25% of consumers often print multiple copies.
Shared use Check the connections and features you need, the space available and who will make the purchase. If several people use the printer, we want to agree in advance on access, consumables and ongoing management. Around 19% of consumers arrange shared management.

Common pitfalls

  • Choosing an A3+ photo printer for drawings that need to be printed on A1

    A3+ and A1 are different paper sizes. An A3+ printer can’t print a plan that requires A1 on a single sheet.

    Before comparing models, note the largest size that needs to remain legible. If the drawings won’t fit on the size you choose, you may need to outsource the printing or print them again.

  • Using a yield for small photos to estimate large studies

    Epson bases the stated yield for the ET-18100 on 10 × 15 cm colour photos and a set of replacement ink bottles. That figure doesn’t tell you how many large architecture studies you can print.

    Budget based on the work you actually print, and allow for test prints and maintenance. Don’t use a photo yield claim to work out the cost or yield per A3+ sheet.

  • Assuming any replacement cartridge will work

    HP says that dynamic security can block cartridges without a suitable HP chip, and that firmware updates may change how it works.

    Check the current cartridge requirements for the exact DesignJet model before setting a consumables budget. Otherwise, the ink you planned to use may not work.

Brands to consider

Epson

Epson describes different models for the two types of printing: the SC-P700 and EcoTank ET-8550 are A3+ photo printers, while the SC-T2100 is designed for technical drawings up to 24 inches.

  • According to Epson, the ET-8550 has refillable ink tanks and print, copy and scan functions; the SC-T2100 supports rolls for technical printing.
  • Epson’s stated photo yield for the ET-8550 isn’t a yield calculation for architecture sheets. Compare it with your own sizes and print mix.

Canon

Canon describes the imagePROGRAF PRO-310 as an A3+ photo printer and the TC-20 as a large-format printer for small organisations and schools.

  • Canon lists ten individual pigment inks for the PRO-310 and support for paper rolls and cut sheets for the TC-20.
  • These are features of different models; they don’t provide a substantiated quality ranking between the product ranges.

HP

HP positions the 2025 edition of the DesignJet T250 for maps and CAD drawings up to A1, rather than specifically as an A3+ photo printer.

  • HP lists input for both cut sheets and rolls, with support from A4 to A1.
  • HP says that dynamic security can block cartridges without a suitable HP chip, and that firmware updates may affect how it works. Check the requirements for the ink you want to use.

Joybuy products

Related products coming soon.

Frequently asked questions

How can you prevent a drawing from printing illegibly?

First, decide on the required finished size. If you need a single A1 sheet, check explicitly that the printer supports that size: HP lists A1 support for the 2025 edition of the DesignJet T250, while Canon lists A3+ for the PRO-310. For critical lines and text, print a sample from your own file.

Can I use a stated number of photos per ink set to calculate the cost of presentation boards?

No, not without further information. Epson describes the ET-18100’s yield in terms of 10 × 15 cm colour photos printed with a set of replacement bottles. Work out costs for your group using your own files, sizes, ink and paper; don’t extrapolate that photo figure directly to A3+.

Who is responsible if the printer is faulty?

For a consumer purchase, the Netherlands Authority for Consumers and Markets says the seller is responsible for the legal guarantee if the product doesn’t meet reasonable expectations. Before buying, establish who is legally making the purchase: this consumer rule shouldn’t automatically be applied to an organisation buying for business use.

Can I hand in an old printer when I buy a new one?

According to the Dutch Government, when a private individual makes a purchase, a shop must accept an old, similar electrical appliance under the take-back scheme, without charging for it. This also applies to online purchases. The scheme doesn’t apply to equipment owned by businesses.